Lubricating Grease Cone Penetration Apparatus Manual Tamper Manual Pressure Shearing SH269-1

Lubricating grease manual tamper manual pressure shearing cone penetration pre-treatment SH269-1 

Manual Grease Worker According to the requirements of GB/T269-91 "Determination of coning degree of grease and petroleum grease" test standard, SH269-1 manual grease tamper is used to complete the pre-treatment of coning degree of working samples through manual pressure shearing under specified test conditions.

Grease Worker ASTM D217 for Measuring The Consistency of Lubricating Grease

ASTM D217 Lubricating Mechanical Grease Worker

Motorized Grease Worker, ASTM D217 Cone Penetration of Lubricating Grease

Technical parameters:

1, thermometer: the use of bimetal thermometer, the range of 0 ~ 50℃, grading 0.5℃

2. Working schedule: 67-71mm

Orifice plate on the hole diameter: 6.35 + 0.13 Ф

Note: For measuring working cone penetration.