ST116A Neutral Acid Fiber Tester is an instrument that uses Van Soest's washing fiber analysis method to determine neutral washing fiber (NDF) and acid washing fiber (ADF), and performs weight measurements to obtain the neutral washing fiber and acid washing fiber content of the sample. Use neutral or acidic detergent to digest and boil the sample under specific conditions, then repeatedly filter in a specific crucible, rinse twice with, move the crucible into a 100 degree drying oven for 3 hours, and then weigh and calculate.

Technical indicators:

1. Test objects: various feeds, grains, grains, foods, and other agricultural and sideline products that require the determination of crude fiber, neutral fiber, and acidic fiber content;

2. Number of test samples: 6/time;

3. Repeatability error:

When the cellulose content is below 10%, the absolute value error is ≤ 0.4;

When the cellulose content is above 10%, the relative error is ≤ 4%;

4. Measurement time: about 90 minutes on the instrument.

5. Power supply: AC220V/50HZ;

6. Power: 3.3KVA;

7. Volume: 540 ×450× 670mm；

8. Weight: 28kg.

Product Packing List