Five-axes Coordination Tiltable 60° X-ray Inspection System for PCBA with 130kV Microfocus Tube

Price Negotiable

Price: Negotiable

MOQ: 1

Delivery Time: 7 work days

Brand: WELLMAN

Product Description

130kV Five-Axes Coordination Tiltable X-ray Inspection System

Key Advantages

Working Principle

Hardware Specifications

X-ray Source
Type	Closed, microfocus
Max Tube Voltage	90kV (110kV, 130kV optional)
Max Tube Current	200μA
Focal Spot Size	5μm (4μm, 2μm optional)
Function	Auto preheat
Flat Panel Detector
Effective Area	130mm×130mm
Pixel Size	85μm
Resolution	1536×1536
Frame Rate	20fps
Tiltable Angle	60°
Table
Size	530mm×530mm
Detectable Area	500mm×500mm
Max Load	10kg
Equipment
Magnification	Geometry 200X	System 1500X
Inspection Speed	Max 3.0s/point
Dimensions	1360mm (L) × 1365mm (W) × 1730mm (H)
Weight	1200kg
Power Supply	AC110-220V 50/60HZ
Max Power	1500W
Industrial PC	I5 CPU, 8G RAM, 500GB SSD
Displayer	24" HDMI LCD
Safety Features
Radiation Leakage	No leakage, international standard: ≤1μSv/h
Lead Glass Observation Window	Transparent lead glass window shields radiation
Window and Back Door Safety Interlock	X-ray tube powers off when opened
Electromagnetic Safety Switch	Locks when X-ray is on
Emergency Stop	Located next to operation position
Tube Protection	Software prevents leaving without closing X-ray tube

Software Functions

Function Module	Operation
X-ray Tube Control	Mouse click to turn on/off X-ray with real-time voltage/current display
Status Bar	Displays interlock status, pre-heat status, and X-ray status
Image Effect Adjustment	Adjust brightness, contrast and gain for optimal results
Product List	Save and recall inspection parameters for efficiency
Navigation Window	Click anywhere in photo to move table to position
Motion Axis Status	Display real-time coordinates
Inspection Result	Display measurement results in order
Speed Control	Adjust movement speed for each axis
Voids Rate Measurement
Automatic Calculation	Click two points to determine rectangle for automatic solder ball analysis
Parameters Adjustment	Adjust grayscale threshold, pixel, contrast, and size filtering
Add Voids Manually	Draw polygons or free figures to calculate as voids
Save Parameters	Save and recall parameters for same product inspection
Other Measurement Functions
Distance	Measure vertical distance from point to baseline
Distance Rate	Measure soldering rate of through-hole components
Angle	Measure angle between rays
Radius	Measure round components using three-point circle determination
Perimeter	Measure square components with two-point determination
Automatic Inspection
Manual Setting	Set any positions as inspection points with automatic inspection
Array	Automatic inspection for regular points using row/column configuration
Automatic Identification	Software automatically identifies positions with obvious features