Long Lasting Epoxy Terrazzo Flooring Made From Epoxy Resin And Stones Ideal For Exhibition Halls And Hotel Lobbies

Epoxy Terrazzo Floor

Product Introduction:

Epoxy Terrazzo Floor is a floor decorative material made by mixing epoxy resin with natural or artificial stones, with excellent wear resistance and decorativeness.

Application Scope:

Epoxy Terrazzo Floor is suitable for floor decoration of large shopping malls, commercial buildings, luxury clubs, exhibition halls, hotel lobbies, residences and villas.

Performance Characteristics:

The performance characteristic of epoxy terrazzo floor is as follows:

1.Possesses all the excellent properties of epoxy floors;

2.Can be designed into various patterns, reflecting flexibility in design.

Construction Process:

1.Base Treatment: Grind the base surface, clean and dry;

2.Primer Coat: Roll and apply epoxy primer once;

3.Topcoat: Mix epoxy terrazzo paint with colored stones, pave and scrape flat;

4.After curing, grind and polish to a smooth finish with special machinery.

Detailed Construction Process:

1.Base Treatment:

Grinding and Roughening: Use diamond grinding heads to grind the base to increase adhesion and remove hollow layers (hollow areas need to be chiseled with an electric pick);

Cleaning and Drying: Vacuum to clean dust in gaps, ensure moisture content ≤ 6% and flatness ≤ 2mm/2m.

2.Primer Construction

Primer Brushing: Mix epoxy primer and curing agent in proportion, scrape evenly, then pave fiber mesh (bonded in horizontal and vertical directions) to seal base pores;

Anti-crack Layer Setting: Pave fiberglass cloth, scrape and apply epoxy flexible film, and cut open bubbled parts.

3.Grid Division and Aggregate Paving

Inlay Grid Strips: Set out lines according to the drawing, fix metal dividing strips with epoxy adhesive, and adjust the elevation;

Aggregate Spreading: Mix epoxy resin, curing agent and aggregates (such as quartz sand, crushed shells), pave and compact with a troweling machine.

4.Grinding and Polishing

Coarse Grinding (50 Grit): Remove surface floating sand and check flatness;

Medium Grinding (150 Grit): Eliminate coarse grinding marks and clean with water grinding;

Fine Grinding (300-800 Grit): Unify the grinding direction to achieve a fine luster.

5.Sealing and Topcoat

Pore Sealing: Scrape and apply transparent epoxy resin to fill pores;

Topcoat Brushing: Choose matte or glossy topcoat material according to needs.

Technical Indicators: