Epoxy Anti-Corrosive Floor Paint

Epoxy Resin Anticorrosion Floor Coating With Excellent Chemical Stability And Wear Resistance For Industrial Applications

Product Introduction

Epoxy anti-corrosive floor paint is a high-performance anti-corrosive coating made of epoxy resin as the main film-forming material, combined with curing agents, solvents, and functional additives. It forms a dense protective layer through multi-layer coating, with excellent chemical stability and physical wear resistance, suitable for industrial places with strict anti-corrosion requirements.

Application Scope

Epoxy Anti-Corrosive Floor Paint is applied to Industrial Field,Special Environments,etc.

1.Industrial Field: Chemical plants, electroplating workshops, pharmaceutical factories (acid and alkali resistance, chemical corrosion resistance).

2.Special Environments: Laboratories, food processing areas (mildew-proof, easy to clean).

3.Commercial Places: Underground parking lots, warehouses (wear-resistant, heavy-load resistance).

Performance Characteristics

Performance characteristics of epoxy anti-corrosion flooring are as follows:

1.Corrosion Resistance: Resistant to strong acids, strong alkalis, and organic solvents (such as hydrochloric acid, sulfuric acid, engine oil).

2.Physical Properties: Wear resistance reaches 1.5-3mg/m²; compressive strength is 65-115MPa; hardness is 79-83 Shore D.

3.Environmental Friendliness: Solvent-free products comply with low VOC standards; some products have passed FDA certification.

4.Decorativeness: Flat and seamless surface, diverse colors; mirror effect can be customized.

Construction Process

1.Base Layer Treatment: Grind and clean the base layer; ensure no oil, cracks; moisture content ≤6%.

2.Primer Construction: Roll and apply epoxy primer to enhance adhesion.

3.Intermediate Layer Filling: Scrape and coat the epoxy mortar layer to improve compressive performance.

4.Topcoat Formation: Construct by self-leveling process with a thickness of 1-3mm; allow natural leveling.

5.Curing and Maintenance: Cure at room temperature for 7 days; put into use after complete curing.

Technical Indicators