Schneider ELAU VPM02D20AA00 PacDrive PS-5/10/20/400/00 System Power Supply

Product Overview

The Schneider ELAU VPM02D20AA00 is the main power-supply module for the PacDrive M iSH distributed servo system. It corresponds to the technical designation PS-5/10/20/400/00 and ELAU material number 13130265.

The PS-5 converts the incoming AC mains supply into the DC intermediate-circuit voltage and 24 VDC auxiliary power required by compatible iSH intelligent servo modules. Power, auxiliary voltage and SERCOS communication are distributed from the PS-5 through DB-5 distribution boxes and PacDrive hybrid cables.

VPM02D20AA00, material number 13130265 and PS-5/10/20/400/00 identify the same confirmed PS-5 power-supply hardware. DB-5 distribution boxes, iSH I/O modules, connectors and hybrid cables are related system components and are not additional PS-5 power-supply variants.

Main Features

• Exact commercial reference: VPM02D20AA00
• Technical designation: PS-5/10/20/400/00
• ELAU material number: 13130265
• PacDrive M iSH system power supply
• Single-phase or three-phase 220-480 VAC mains input
• 10 A or 20 A configuration-dependent input and output capacity
• Intermediate-circuit output up to approximately 680 VDC
• 24 VDC, 12 A auxiliary output
• Separate 24 VDC, 13 A control input
• Integrated mains filter
• Integrated bleeder circuit
• Integrated SERCOS interface
• Supplies compatible DB-5 distribution boxes
• Designed for PacDrive iSH intelligent servo modules
• Legacy replacement and system-maintenance product

Technical Specifications

Compatible System and Applications

The VPM02D20AA00 is designed for PacDrive M distributed motion-control systems using compatible iSH intelligent servo modules. Typical applications include high-speed packaging machinery, filling and labeling lines, robotic handling systems, printing machinery, food-processing equipment and production machines using distributed servo axes.

The PS-5 normally connects to one or more DB-5 distribution boxes. Each DB-5 provides branch connections for compatible iSH modules or additional distribution boxes. The network uses hybrid cables carrying DC bus power, 24 VDC auxiliary power and SERCOS communication.

The permitted number of connected iSH modules depends on motor ratings, simultaneous loading, cable lengths, machine duty cycle, regenerative energy, DB-5 topology and the complete system power calculation. Historical documentation contains different maximum-module figures, so final sizing must be based on the installed machine and the applicable engineering manual.

Maintenance and Replacement Notes

Before replacement, verify the complete VPM02D20AA00 commercial reference, PS-5/10/20/400/00 designation, ELAU material number 13130265, hardware revision, firmware and installed machine project.

Confirm whether the system uses single-phase or three-phase mains power and record the exact supply voltage. Verify the 24 VDC control input, intermediate-circuit wiring, auxiliary output, protective earth, SERCOS connection and all hybrid-network connections.

Inspect every connected DB-5 box, hybrid cable and iSH module before energizing a replacement power supply. A damaged hybrid cable, shorted iSH power stage or defective DB-5 distribution box can overload or damage the replacement PS-5.

Record the existing DB-5 topology, cable lengths, connector orientation and branch arrangement. Do not change the distribution topology without confirming voltage drop, current capacity, SERCOS communication and machine-project compatibility.

PS-4 and PS-5 are not interchangeable. PS-4 supplies PacDrive SCL integrated servo systems, while PS-5 supplies PacDrive iSH distributed servo systems through DB-5 distribution boxes.

Related Models

VBO03S00, material number 13130266-001, is the confirmed DB-5 power distribution box used between the PS-5 and connected iSH branches. VBO03S03 is an observed special DB-5 hardware variant whose exact difference from VBO03S00 must be verified from the physical label.

Related system components include 13130267 iSH-DIO8 optional I/O module, KT10659 DIO-4 M12 sensor and actuator distribution box, and 15154417 iSH-HCN1 hybrid connector.

Related hybrid cables include VW3E1117R050 and VW3E1117R100 for PS-5 or iSH-HCN1 to DB-5 connections, VW3E1118R030 and VW3E1118R050 for DB-5 distribution connections, and VW3E1119R020 for DB-5 to iSH connections. Cable length, connector type and orientation must be matched exactly.

These distribution boxes, I/O modules, connectors and cables are related PacDrive iSH system parts. They must not be listed as PS-5 power-supply variants.

Inquiry and Supply Notes

Please provide clear photographs of the complete PS-5 nameplate, front panel, power terminals and hybrid-network connectors when requesting a quotation. Also provide the connected DB-5 references, iSH module models, cable lengths, mains configuration and machine-project information.

The complete commercial reference, hardware revision, firmware, mains configuration, DB-5 topology, connected iSH load, product condition, testing status, included connectors, availability and delivery time must be confirmed before quotation.