Gefran ME2-6-M-B01C-1-5-D 2130X000X00 F007762 Melt Transmitter Type J
Product Identity
Gefran ME2-6-M-B01C-1-5-D 2130X000X00, order code F007762, is a 100 bar melt pressure transmitter with an integrated Type J thermocouple. Unlike the shorter code-4 ME2 configuration, this model uses rigid-stem code 5, corresponding to a 318 mm or 12.5 inch rigid section. The longer rigid stem is a defined mechanical configuration and must be matched to the installed machine rather than treated as a minor dimensional variation.
Low-Range Measurement Considerations
The B01C code specifies a 0–100 bar pressure span, associated with the nominal 1500 psi class. This range can provide better usable resolution on lower-pressure extrusion processes, but the selected span must accommodate startup pressure, cold-material conditions and process transients. It is not suitable merely because the normal running pressure is below 100 bar; validated peak pressure must also be considered.
Confirmed Specifications
| Model | ME2-6-M-B01C-1-5-D 2130X000X00 |
| Gefran Material Code | F007762 |
| Pressure Range | 0–100 bar |
| Accuracy Class | M, less than ±0.5% FS |
| Pressure Signal | Two-wire 4–20 mA |
| Supply Requirement | 10–30 VDC |
| Temperature Signal | Type J thermocouple |
| Connector | 6-pin; verify the mating connector and pinout |
| Process Thread | 1/2-20 UNF |
| Rigid Stem | 318 mm / 12.5 inches |
| Flexible Section | 457 mm / 18 inches |
| Maximum Diaphragm Temperature | 400°C |
Why Stem Code 5 Must Be Verified
The extended rigid section changes the sensor’s mechanical reach and the position of the flexible transition. Before replacement, compare the installed insertion geometry, heater arrangement, available clearance and routing path. A shorter code-4 stem may physically fit the same thread but place the flexible section and electronics in a different thermal environment.
Commissioning Notes
Scale the current input from 0 to 100 bar. Connect the thermocouple to a Type J-compatible channel with correct polarity and cold-junction compensation. Keep the thermocouple circuit separate from the powered 4–20 mA loop. Confirm the six-pin diagram because connector appearance alone does not establish identical wiring.
Related Models
ME2-6-M-B01C-1-4-D 2130X000X00 (F007760) retains the 100 bar range but uses a 153 mm rigid stem. ME2-6-M-B35D-1-5-D 2130X000X00 (F007788) keeps the longer code-5 stem but increases the pressure range to 350 bar. ME2-6-M-B07C-1-5-D 2130X000X00 (F007779) is the corresponding 700 bar long-stem configuration. Related models are provided for family reference only and are not automatically interchangeable.
Ordering Requirement
Provide F007762 together with the full model and a nameplate photograph. Verify the 100 bar span, code-5 rigid length, flexible length, Type J channel, process thread, connector and product condition before ordering.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.