H2 Hydrogen Leak Detector,
It is extensively used in petroleum, petrochemistry, chemical industry, gas, coal, metallurgy and power system;safety detection in municipal administration, communication and traffic tunnel construction; electronics and semiconductor industry, animal husbandry, biogas plant & biogas digester and other places where toxic and harmful gases exist.
It can be also used in food & beverage industry, agriculture, medical industry, lab, etc for related gas analysis.
Product Features:
1. Handheld, industry use, high sensitivity and accuracy
2. Intrinsically safe, Ex sign is Exibd I
3. Rugged ABS+PC case, heavy duty, crash resistant
4. High-capacity chip, 4 layers PCB board
5. Visual & audible alarm
6. High & low alarm point, fully adjustable
7. SETL & TWA alarm
8. Low battery alarm
9. Rechargeable battery
10. LCD large screen display with Real time of target gas concentration, clock and status of battery
11. With Stainless Steel belt clip
12. Support data logging function
13. External air sampling pump is available for gas leak detection.
14. Imported sensor
Technical Parameter:
|
Gas detected |
Hydrogen (H2) |
|
Measuring range |
(0~1000)ppm |
|
Resolution ratio |
1ppm |
|
Sensor |
Electrochemical Sensor, Made in UK |
|
Sensor lifetime |
≥2 year |
|
Response time |
≤45s(T90) |
|
Alarms |
Audible--buzzer with ≥75dB audible Visible--flashing red LED, ≥20m visible |
|
Alarm point |
Fully adjustable |
|
Data logging (optional) |
Continuous Data logging (9000 data at configurable 0.1-10 minutes intervals) |
|
Continuous working time |
>3 months ( without backlight) |
|
Working current |
< 1mA ( without backlight) |
|
Working temperature |
-25ºC~+55ºC, short time: -40ºC~+55ºC |
|
Display |
Liquid crystal display (LCD) |
|
Battery model |
PL123450, 3.7V/1500mA |
|
Charging time |
4-5 hours |
|
Dust and water resistance |
IP65 |
|
Size & Weight |
105*54*32mm/200g |
|
Ex sign |
Exibd I |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.