COENG Single-Station Vacuum Glove Box With Purification System For Battery Research
Price:
Service Quotation
MOQ:
1
Delivery Time:
30
Brand:
COENG
Product Description
COENG Single-Station Vacuum Glove Box With Purification System
The COENG vacuum glove box with purification system provides an enclosed workspace for processes requiring controlled water and oxygen levels. Its single-side operating layout combines a stainless steel chamber, an inclined viewing window and internal shelving with large and small antechambers for material transfer.
For importers, equipment distributors, procurement teams and engineering contractors, the configuration provides defined dimensions and monitoring functions for laboratory equipment selection. Battery research applications should be assessed against the materials, solvents, process steps and atmosphere requirements of each project.
Controlled Atmosphere with Defined Acceptance Conditions
The specified acceptance criterion is water content below 1 ppm and oxygen content below 1 ppm in an empty chamber during circulation. This criterion applies at a constant temperature of 20–25°C, 65% ambient relative humidity and an inert gas source purity of 99.999%.
The system supports helium, nitrogen or argon as working gases. Gas selection should match the intended materials and process. Performance during operation depends on material loading, transfer frequency, gas quality and process conditions.
Stainless Steel Workspace
The chamber uses 3 mm thick 304 stainless steel and an inclined, removable 8 mm tempered glass front window. Two internal shelving levels provide space for organizing laboratory materials.
Specified chamber dimensions are 1220 × 770 × 900 mm, expressed as length × width × height. Overall equipment dimensions are 2020 × 850 × 1900 mm. Equipment placed inside the chamber should be checked against usable space, access requirements and operator reach.
Dual Antechambers for Material Transfer
The large antechamber measures Ø390 × 600 mm and includes a 300 × 450 mm stainless steel sliding tray. The small antechamber measures Ø150 × 300 mm and uses manual valves for evacuation and gas refill.
These two chamber sizes provide transfer options for different material dimensions. Confirm sample size, transfer frequency and evacuation requirements when specifying the equipment.
PLC Control and Water/Oxygen Monitoring
The PLC touchscreen supports English and Chinese interfaces, pressure control, circulation control and alarm functions. A foot pedal provides additional pressure adjustment.
The oxygen analyzer has a stated range of 0–1000 ppm, while the water analyzer covers 0–500 ppm. Pressure and water/oxygen alarms support monitoring during operation.
Purification, Regeneration and Solvent Adsorption
The system includes a single purification column with regeneration functionality. An organic solvent adsorption module uses a 304 stainless steel housing with a 7 kg activated carbon charge.
The 7 kg specification describes the installed carbon mass. Adsorption performance and replacement intervals depend on the solvent and operating conditions.
Key Specifications
| Item | Specification |
|---|---|
| Operating layout | Single side, single workstation |
| Water and oxygen acceptance levels | Each <1 ppm under specified empty-chamber conditions |
| Chamber construction | 304 stainless steel, 3 mm thick |
| Chamber dimensions, L × W × H | 1220 × 770 × 900 mm |
| Overall dimensions, L × W × H | 2020 × 850 × 1900 mm |
| Front window | Removable 8 mm tempered glass |
| Gloves | Butyl rubber, 0.4 mm thick |
| Large antechamber | Ø390 × 600 mm |
| Small antechamber | Ø150 × 300 mm |
| Large antechamber tray | 300 × 450 mm |
| Stated chamber pressure range | −10 to +10 mbar |
| Stated leakage rate | ≤0.01 vol%/h |
| Oxygen analyzer range | 0–1000 ppm |
| Water analyzer range | 0–500 ppm |
| Control interface | PLC touchscreen, English/Chinese |
| Purification configuration | Single column with regeneration |
| Solvent adsorption media | 7 kg activated carbon charge |
Frequently Asked Questions
Does the below-1-ppm specification apply to all operating conditions?
It is an empty-chamber acceptance criterion under the stated temperature, ambient humidity and gas purity conditions. Loaded-process performance should be evaluated for the intended application.
What should buyers provide when requesting a quotation?
Provide the intended process, materials and solvents, required water and oxygen levels, sample dimensions, transfer frequency, preferred working gas, installation space and local electrical supply.
What should be confirmed before ordering?
Confirm the vacuum pump configuration, antechamber ultimate pressure, analyzer accuracy and calibration, circulation flow rate, regeneration cycle, utility requirements and acceptance procedure in the technical agreement.
Request a Project Specification
Contact COENG with your battery laboratory or materials-handling requirements. Request a configuration review and quotation based on your process, workspace and utility conditions.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
SHENZHEN COENG TECH CO., LTD.
Location
1404-1405A Tower A, Huahai Financial Creative Center,No.5073 Menghai Avenue,Qianhai Shenzhen-Hong Kong Cooperation Zone,Shenzhen,China
Contact Person
COENG