Henan Senyao Heavy Truck International Trade Co., Ltd.
                                                                                                           
Verified Supplier
1 Years
Since 2025
Menu

SHACMAN F3000 6x4 18000L Crude Oil Transport Tanker Truck 340HP With Discharge Pump Heating System

Price Negotiable
Price: Negotiable
MOQ: 1 Unit
Delivery Time: 35-55 working days after deposit
Brand: SHACMAN
Product Description

SHACMAN F3000 6x4 18,000L Crude Oil Tanker — Heated Transport with PD Pump

Heated tank for heavy crude and bitumen — 50mm insulation, exhaust heat exchanger, screw pump discharge

Tanker Truck

F3000 6x4 crude oil tanker — insulated tank with aluminum cladding

Tanker Truck

Heating system controls and temperature gauge at rear cabinet

This is the tanker you need when you are moving heavy crude, bitumen, or residual fuel oil that will not flow at ambient temperature. The tank holds 18,000 liters (less than standard tankers because the insulation and heating hardware take up volume) and is built on the SHACMAN F3000 6x4 with the proven 340HP Weichai. Tank shell is 6mm carbon steel with internal heating coils running the full length of the tank floor.

Heating comes from two sources: an exhaust gas heat exchanger that uses waste heat from the engine (free energy while you are driving), and a diesel-fired burner for stationary heating at the loading/unloading point. The tank is wrapped in 50mm rockwool insulation with an aluminum cladding jacket — touch the outside after a 4-hour run and it is barely warm. Temperature is monitored via a dial gauge at the rear control cabinet. Target discharge temperature is 60-80 degrees C, reachable in about 45 minutes from cold with the burner.

Key Specifications

Tank Capacity18,000 Liters
Tank Material6mm Carbon Steel
Insulation50mm Rockwool + Aluminum Cladding
HeatingExhaust heat exchanger + diesel burner
Max TempUp to 80 degrees C (45 min from cold)
Discharge PumpPositive displacement screw, 40 m3/h
Tanker Truck

Heated discharge hose and PD screw pump for viscous oil handling

Discharge uses a positive displacement screw pump rather than a centrifugal — PD pumps handle viscous fluids much better and do not lose prime easily. Flow rate is about 40 cubic meters per hour at operating viscosity. The 3-inch discharge hose is electrically heat-traced and insulated so the product does not cool and clog during unloading. Safety features include a flame arrestor on the tank vent, static grounding reel, and an emergency stop at the rear control station. We shipped two of these to an oil field service company in South Sudan — they run them daily between wellheads and the central gathering station without issues.

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company Henan Senyao Heavy Truck International Trade Co., Ltd.
Location 34.75982954584075, 113.7674878365134
Contact Person Zhang Jianlei

Request A Quote

Please check your email address.
Your message must be at least 20 characters.