Bulk Feed Carrier Truck SHACMAN F3000 6x4 40CBM Five Bin Hydraulic Auger Lorry Truck
The 40 cubic meter version of the F3000 6x4 feed truck is the one large feed mills order when they want to cut trips. It carries roughly 25 to 28 tonnes of bulk feed and the body is divided into five bins, so a single load can cover five different rations.
| Brand | SHACMAN |
| Chassis Model | SX1255JV434 |
| Drive Type | 6x4 |
| Cab | F3000 flat-floor sleeper cab with A/C |
| Engine Model | Weichai WP12.430E201 |
| Engine Type | 6-cylinder inline, turbocharged, water-cooled |
| Displacement | 11.596 L |
| Rated Power | 430 HP / 316 kW |
| Max Torque | 2000 N.m |
| Emission Standard | Euro 2 |
| Transmission | FAST 10-speed manual |
| Front Axle | 7.5 t |
| Rear Axle | 16 t hub reduction |
| Suspension | Leaf spring with hydraulic shock absorbers |
| Steering | Integral power steering |
| Brake System | Full air brake with ABS |
| Tire | 12.00R20, 11 pcs incl. spare |
| Fuel Tank | 400 L aluminum alloy |
| Wheelbase | 4375+1400 mm |
| Overall Dimensions | 10300 x 2550 x 3900 mm |
| Curb Weight | 13000 kg |
| Gross Vehicle Weight | 25000 kg |
| Max Speed | 90 km/h |
| Gradeability | 30% |
| Body Volume | 40 CBM |
| Body Compartments | 5 bins, approx. 8 CBM each |
| Compartment Doors | Independent hydraulic gates |
| Body Material | Q235 carbon steel |
| Panel Thickness | 4 mm side, 5 mm floor |
| Loading Opening | 5 top hatches with rain covers |
| Auger Diameter | 219 mm |
| Auger Arrangement | 1 floor auger + 1 vertical auger |
| Auger Rotation | 360 degree |
| Discharge Height | 7.5 m |
| Discharge Capacity | 1.5 t/min |
| Conveying Distance | approx. 8 m |
| Hydraulic Drive | PTO driven gear pump |
| Body Reinforcement | Heavy duty version with reinforced frame |
| Loading Capacity | 25-28 t bulk feed |
Two hydraulic augers handle discharge. The main vertical auger rotates 360 degrees and lifts to 7.5 meters, and a horizontal floor auger feeds it so the last few tonnes come out as fast as the first. Discharge runs at about 1.5 tonnes per minute.
Underneath it is the same F3000 6x4 chassis: Weichai WP12.430E201, 430 hp, Euro 2, FAST 10-speed manual, 25 tonne gross weight and 12.00R20 tyres. The rear axle is a 16 tonne hub-reduction type, which is what lets the heavier body take full loads on rough farm roads.
If your routes have steep ramps we can fit a retarder and a reinforced rear suspension. If you mostly run on good roads we can lighten the body to gain payload. Both have been done for buyers in Nigeria and Kazakhstan.
- 40 CBM five bin body for high volume feed delivery
- Twin augers discharge at up to 1.5 t/min
- Vertical auger reaches 7.5 m into tall silos
- 16 t hub reduction rear axle for rough farm roads
- Retarder and reinforced suspension options available
Build time is 40-60 working days. Send us your average trip distance and the worst road on your route, and we will set the spec so the truck lasts.
The specifications above are for reference and are confirmed with you before production. Cab color, body size, bin layout and discharge height can be adjusted to your requirement.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.