Outdoor Led Surge Protection Device 220V 320V 10kA 20kA IP67 T2 T3 SPD

The LPC Series is a dedicated surge protector engineered for LED street lights and high-power outdoor electrical equipment, ideal for installation in LPZ 2-3 and subsequent lightning protection zones. It features a two-port full-mode protection architecture, delivering all-round surge shielding for line-neutral, line-earth, and neutral-earth paths.
With its ultra-compact dimensions (42mm×30mm×23mm) and tool-free installation, it is perfectly suited for space-constrained outdoor scenarios. The IP67-rated enclosure ensures dustproof and waterproof performance, while the V0 flame-retardant nylon housing offers exceptional durability and corrosion resistance, making it reliable for both indoor and outdoor deployments.

Product Specification

Notices

1.Installation Scenario: Designed for series installation at the front end of LED street lights and high-power outdoor equipment, within LPZ 2-3 or subsequent lightning protection zones.

2.Mounting Method: Use the included φ4mm fixing lugs for secure installation, ensuring resistance to wind and vibration in outdoor environments.

3.Wiring Requirements: Utilize the pre-attached 200mm wires (1.5mm² cross-sectional area) for convenient wiring; ensure proper sealing of wiring connections to maintain IP67 protection.

4.Load Limit: Do not exceed the maximum 10A load current to prevent overheating and ensure device longevity.

5.Status Monitoring: If the optional green LED indicator is off (indicating device failure) or after severe surge impact, replace the SPD immediately to maintain protection.

6.System Compatibility: This product is designed for AC 220Vac(50Hz) systems; confirm the system voltage matches before installation.

FAQ

Q1: What is the maximum load current this LPC Series SPD can handle?

A1: It supports a maximum load current of 10A, making it suitable for high-power LED street lights and other outdoor equipment with moderate power demands.

Q2: What are the key differences between the LPC Series and LPF Series SPDs?

A2: The LPC Series features a two-port design and 10A load current capacity, tailored for high-power outdoor equipment. In contrast, the LPF Series uses a one-port design without a specified load current limit, intended for general-purpose equipment applications.

Q3:  Is this product suitable for coastal areas with high humidity?

A3: Yes. Its IP67 ingress protection and corrosion-resistant nylon housing make it highly suitable for high-humidity and corrosive coastal environments.

Q4: Can this SPD be used for other outdoor equipment besides LED street lights?

A4: Absolutely. It is compatible with a wide range of high-power outdoor electronic devices, including large-scale sensors, outdoor monitoring equipment, and other industrial outdoor units.

Q5: What are the specifications of the pre-attached wires?

A5: The product comes with 200mm-long wires with a cross-sectional area of 1.5mm², designed for convenient and reliable field wiring.