2 Wire Signal SPD Network Surge Arrester 5V 60V DC 5Vdc 10kV PLC Sensor Full Mode
LS-W2 Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Full-Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides full-mode fine protection for two signal lines.
Featuring an ultra-thin design (7mm thickness), the product saves space in control cabinets, making it ideal for space-constrained environments. The module comes with guide rail ground contact, enhancing grounding reliability. The multi-level protection circuit ensures high flow rate and low residual voltage, covering both line-line and line-ground surge paths.
| Product Features |
● Ultra-thin design saves space. |
● The module comes with guide rail ground contact. |
● High flow rate, low residual pressure. |
● Full-mode precision protection. |
● Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it is a lightning arrester for communication equipment such as communication dedicated lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. |
Product Specification
| Standards | IEC 61643.21 | |||
| Models | LS-5W2 | LS-12W2 | LS-24W2 | LS-48W2 |
| Parameter | ||||
| Nominal operating voltage Un | 5Vdc | 12Vdc | 24Vdc | 48Vdc |
| Maximum continuous operating voltage Uc | 6Vdc | 18Vdc | 32Vdc | 60Vdc |
| X-X,X-C Shock rating C2 | 10kV/5kA | |||
| X-X,X-C Shock rating B2 | 4kV(10/700μs) | |||
| X-X,X-C Shock rating D1 | 2.5kA(10/350μs) | |||
| X-X Up@C2 | ≤15V | ≤30V | ≤60V | ≤95V |
| X-C Up@C2 | ≤15V | ≤30V | ≤60V | ≤95V |
| X-X Up@B2 | ≤10V | ≤25V | ≤45V | ≤60V |
| X-C Up@B2 | ≤10V | ≤25V | ≤45V | ≤60V |
| Response time tA | ≤1ns | |||
| Load current IR | 500mA | |||
| Line to line bandwidth fG | 3MHz | |||
| Protective Line | X1-X2,X1-C,X2-C | |||
Installation method | DIN Rail 35mm |
Screw torque | 1N*m |
Strip length | 10mm |
Wiring cross-sectional area | 0.5mm²-2.5mm² |
Product size | 90mmx65mmx7mm |
Shell material and flame retardant grade | ABS,UL 94 V-0 |
Installation location | Indoor |
Shell protection rating | IP20 |
Temperature range | -40℃…+80℃ |
Humidity range | Relative humidity≤95% |
Notices
1.The ultra-thin design (7mm) saves space, but avoid installing in areas with strong mechanical impact.
2.Select the model based on the signal line's nominal operating voltage (5Vdc/12Vdc/24Vdc/48Vdc).
3.The module comes with guide rail ground contact; ensure the DIN Rail is properly grounded.
4.Use wiring with cross-sectional area 0.5mm²-2.5mm² and tighten screws to 1N·m torque.
5.Avoid installing in environments with strong electromagnetic interference to prevent signal distortion.
6.Regularly inspect the module for loose connections or physical damage; replace if faulty.
FAQ
Q1: What is the thickness of the product?
A1: The product thickness is only 7mm, featuring an ultra-thin design to save space in control cabinets.
Q2: What is the function of the guide rail ground contact?
A2: It enhances grounding reliability by utilizing the DIN Rail as a ground path, simplifying installation.
Q3: What is the load current capacity of the product?
A3: The maximum load current is 500mA, suitable for most industrial control signal lines.
Q4: Does the product require external power supply?
A4: No, it is passive and does not require external power supply, drawing minimal power from the signal line.
Q5: Can it be used for both DC and AC signal lines?
A5: It is specifically designed for DC signal lines (5Vdc/12Vdc/24Vdc/48Vdc). For AC signals, choose dedicated AC signal SPD models.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.