Network 2 In 1 Whole House Surge Protector 220V 5kA 100M Video Monitoring IP Camera
LS-PN Series Power & Network 2-in-1 Lightning Arrester is designed for LPZ 2-3 and subsequent lightning protection zones, suitable for CAT-5 class lines and power supply lines of video monitoring systems and BASE-T computer network information systems.
| Applications |
| ● Video monitoring system power and network lines |
| ● BASE-T computer network information systems |
| ● CAT-5 class line protection for industrial and commercial networks |
| ● Security camera power and signal lines |
| ● Small office and home office (SOHO) network and power protection |
| ● Indoor network equipment with integrated power supply needs |
Product Specification
| Standards | IEC 61643.21,IEC 61643.11 | ||||
| Models | LS-PN220 | LS-PN24 | LS-PN24 | LS-PN12 | Standard features |
| Parameter | |||||
| function | Power | Network | |||
| Nominal operating voltage Un | 220Vac / 24Vac / 12Vdc | 5V | |||
| Maximum continuous operating voltage Uc | 320Vac3 /2Vac / 18Vdc | 8V | |||
| Nominal discharge current (8/20μs) In | 5kA / 2kA | 2kA | |||
| Maximum discharge current (8/20μs) Imax | 10kA / 3kA | - | |||
| Voltage protection level In@Up | ≤1.25kV / ≤200V / ≤180V | ≤15V | |||
| Response time tA | 25ns | 1ns | |||
| Maximum transfer rate Vs | -- | 100MHz | |||
| Protective Line | L-N,L-E,N-E | 1-2,3-6 | |||
| Failure indication |
LED off: failure
|
Signal interruption
|
|||
|
Installation method
|
DIN Rail 35mm
|
|
Screw torque
|
1N*m
|
|
Strip length
|
10mm
|
|
Wiring cross-sectional area
|
0.5mm²-4mm²
|
|
Product size
|
90mmx36mmx68mm
|
|
Shell material and flame retardant grade
|
PA66,VO
|
|
Installation location
|
Indoor
|
|
Shell protection rating
|
IP20
|
|
Temperature range
|
-40℃…+80℃
|
|
Humidity range
|
Relative humidity≤95%
|
FAQ
Q1: What is the maximum network transfer rate supported?
A1: It supports up to 100Mbit/s, compatible with 100 BASE-T network standards.
Q2: Can it protect both power and network lines simultaneously?
A2: Yes, it integrates power and network surge protection, providing dual shielding for connected equipment.
Q3: What is the difference between the models?
A3: The models differ in power supply voltage: LS-PN220 (220Vac), LS-PN24 (24Vac), LS-PN12 (12Vdc). Network protection parameters are consistent.
Q4: Does the product require external power supply?
A4: No, it draws power from the protected power line and does not require additional external power supply.
Q5: Is it suitable for outdoor use?
A5: No, it is designed for indoor use (IP20) in equipment cabinets and control rooms.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.