Reactor--Current limiting reactor

Price Negotiable

Price: Negotiable

MOQ: 5pcs

Delivery Time: 30days

Product Description

Overview:

The AZ1 type current-limiting reactor is a dry-type reactor made by casting with unsaturated polyester resin, used to limit the inrush current when capacitors are connected.

Meet the standard:

●GB/T 1094.6-2011

●GB/T 19212.1-2016

Model and meaning:

A	Z	1	-		口	/	口
\|	\|	\|			\|		\|
1	2	3			4		5
Number				Number Name
1				Current-limiting reactor
2				single-phase
3				Design Number
4				Equipped with capacitor capacity(kvar)
5				Rated voltage of the system(kv)

Technical Specifications:

Normal working conditions and installation conditions
Installation site	Indoor
Ambient temperature	-25℃~+50°℃
Relative humidity	≤ 50% at 40 ° C; ≤ 90% at 20 ° C
Altitude	≤1000m
Environmental conditions	No harmful gases and vapors, no conductive or explosive dust, no severe mechanical vibrations.
*Note: Each three-phase capacitor should be equipped with a reactor for each phase. When installing three phases in parallel, attention should be paid to the direction of the reactor wiring in and out. The wiring of the intermediate phase must be opposite to that of the two phases. If X1 at the beginning of the two phases is the incoming line, then X2 at the end of the intermediate phase is the incoming line. The center distance between reactors shall not be less than 42mm.

Appearance and installation dimensions:

Dimensions and Structure	Product Model	Capacity of the provided capacitor (kvar)	Rated voltage(V)	Rated current(A)	Current limiting multiple(In)	Dimensions WxDx H(mm)	Installation size(mm)
	AZ1-12	12	380	22.5	≥50	90x32x90	68
	AZ1-14	14	380	26	≥50	90x32x90	68
	AZ1-15	15	380	28	≥50	90x32x90	68
	AZ1-16	16	380	30	≥50	90x32x90	68
	AZ1-18	18	380	33.6	≥50	90x32x90	68
	AZ1-20	20	380	37.5	≥50	110x48x110	68
	AZ1-25	25	380	47	≥50	110x48x110	82
	AZ1-30	30	380	56	≥50	110x48x110	82