200KW 37.5~25m3/min Oil Inject Screw Compressor
AIRERA 200kW Industrial Oil-Injected Screw Compressor: The Benchmark for High-Capacity Energy Efficiency
The AIRERA 200kW Series is the ultimate power core tailored for large-scale manufacturing enterprises that demand exceptional productivity. With a versatile capacity range of 25 to 37.5 m³/min, this series is engineered to provide stable, powerful compressed air with superior specific power output. AIRERA is committed to minimizing the energy cost per cubic meter of compressed air, even under the most demanding heavy-duty operating conditions.
Only electric motors from well-known manufacturers of protection class IP55/IE3&4 are used. As a standard, the drive motors are monitored both thermally (via the thermistor of the motor) as well as electronically (overload protection via the frequency inverter).
The amount of oil in the units is determined in such a way as to extend the oil change intervals (depending on ambient conditions). An oil level sensor is integrated as standard and is read by the controller. All the units in this series have a horizontal oil separation vessel in which the oil is separated from the compressed air highly efficiently at low speeds.
The almost loss-free power transmission guarantees reliable, high-performance compressor operation. The regular maintenance requirement is reduced to lubrication of the motor. All the electronic components are brand products of leading manufacturers.
| ITEM | UNIT | MODEL AGCD-200 |
|---|---|---|
| Free air delivery | m³/min | 37.5~25 |
| Max. working pressure | MPa | 0.7~1.3 |
| Compressor type | Oil inject screw compressor | |
| Cooling type | Air cooling | |
| Driven type | Direct driven | |
| Inlet status - Temperature | ℃ | ≤45 |
| Inlet status - Pressure | MPa | Atmospheric pressure |
| Inlet status - Relative humidity | ≤90% | |
| Noise Level | dB(A) | ≤82 |
| Residual oil content | ppm | ≤2 |
| Drive rotor speed | rpm | 2980 |
| Compressed air outlet temperature | ℃ | Ambient temperature＋10 |
| Cooling air flow | m³/hr | 19200 |
| Control mode | Intelligent controller | |
| Safety valve set pressure | MPa | 0.77 ~ 1.43 |
| Lubricating oil volume | L | 110 |
| Compressed air outlet connection | DN80 | |
| Dimension - L | mm | 3150 |
| Dimension - W | mm | 1800 |
| Dimension - H | mm | 1800 |
| Net Weight | kg | 3300 |
| Motor - Model | Y2355L1-2 | |
| Motor - Speed | rpm | 2980 |
| Motor - Rated Power | KW | 200 |
| Motor - Service factor | 1.2 | |
| Motor - Efficiency | IP55 | |
| Motor - Startup mode | Y-Δ starting | |
| Motor - Voltage | V | 380 (Special on request) |
| Motor - Frequency | Hz | 50 (Special on request) |
| Motor - Rated current | A | 405 |
| Motor - Weight of motor | kg | 1610 |
-
Specific Power Optimization: Through our high-precision rotor profiles, we produce more air per kilowatt (up to 37.5m³/min), directly lowering unit energy consumption.
-
VSD Constant Pressure Technology: Our smart VFD control dynamically adjusts motor speed based on real-time demand. This eliminates the massive energy waste caused by frequent "load/unload" cycles in large units, resulting in total energy savings of over 30%.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.