200KW VSD Direct driven oil inject screw compressor
The AIRERA 200kW VSD Direct-Driven Oil-Injected Screw Compressor represents a peak in energy efficiency, specifically engineered for extreme industrial loads. Featuring 1:1 direct-drive technology, this model eliminates the energy losses associated with belt or gear transmissions, ensuring near-zero power loss during delivery while providing much quieter operation.
At its core, the AIRERA intelligent VSD system adjusts rotational speeds in milliseconds to match air demand. Combined with a low-speed, large-rotor design, it achieves comprehensive energy savings of over 35%. Built for heavy-duty environments, the unit features reinforced internal flow channels and lubrication systems, maintaining constant discharge pressure while significantly reducing mechanical wear. Supported by the AIRERA IoT Platform for 24/7 status monitoring and maintenance alerts, it provides a powerful, stable, and cost-effective compressed air solution for your large-scale production lines.
-
With a wider frequency modulation range of 30–200 Hz, it is 15–35% more energy-efficient than most 300–100 Hz compressors on the market
Next-generation control system: We employ dual-inverter technology, retaining the original motor inverter features while also incorporating an inverter-controlled cooling fan for the main unit. This dual-inverter approach ensures the cooling system operates in a stable state, and the modular design facilitates easy maintenance.
PCB coating enhances environmental resistance; an excellent heat dissipation design allows operation at ambient temperatures up to 50°C. The system automatically adjusts the output rating based on temperature rise conditions to maintain the inverter’s sustained high-efficiency operation.
-
Specialized Oversized Inlet Valve
· Normally closed, oversized bore, ultra-low pressure drop;
· Low failure rate, long service life;
·Multi-touch color controller for simple and convenient operation and monitoring
| ITEM | UNIT | MODEL AGCD-200 VP |
|---|---|---|
| Free air delivery | m³/min | 9.05-36.0 | 9.05-33.0| 7.15-25.0 |
| Max. working pressure | MPa | 0.8 ~1.3 |
| Compressor type | Oil inject screw compressor | |
| Cooling type | Air cooling | |
| Driven type | Direct driven | |
| Inlet status - Temperature | ℃ | ≤45 |
| Inlet status - Pressure | MPa | Atmospheric pressure |
| Inlet status - Relative humidity | ≤90% | |
| Noise Level | dB(A) | ≤79 |
| Residual oil content | ppm | ≤2 |
| Drive rotor speed | rpm | 800~3000 |
| Compressed air outlet temperature | ℃ | Ambient temperature＋10 |
| Cooling air flow | m³/hr | 19200 |
| Control mode | Intelligent controller | |
| Safety valve set pressure | MPa | 0.88 ~ 1.43 |
| Lubricating water volume | L | 110 |
| Compressed air outlet connection | DN80 | |
| Dimension - L | mm | 3150 |
| Dimension - W | mm | 1800 |
| Dimension - H | mm | 2100 |
| Net Weight | kg | 3390 |
| Motor - Model | YTH-315L2-8 PM | |
| Motor - Speed | rpm | 800~3000 |
| Motor - Rated Power | KW | 220 |
| Motor - Service factor | 1.2 | |
| Motor - Protection type | IP55 | |
| Motor - Efficiency | IE3 | |
| Motor - Startup mode | Frequency starting | |
| Motor - Voltage | V | 380(Special on request) |
| Motor - Frequency | Hz | 50-200(Special on request) |
| Motor - Rated current | A | 405 |
| Motor - Weight of motor | kg | 1610 |
Absolutely. AIRERA 200kW units are equipped with high-efficiency, frequency-dedicated motors. These motors feature a wider speed-adjustment range and superior insulation classes (Class F/H). They are engineered to handle frequency fluctuations from the inverter and maintain excellent temperature control even during prolonged low-frequency operation, ensuring 24/7 continuous production without downtime.
Thanks to the instantaneous response of the VSD system coupled with the direct-drive structure, AIRERA delivers "air on demand." Unlike traditional units that cause pressure swings during frequent load/unload cycles, this series maintains pipeline pressure fluctuations within ±0.01 MPa. Stable air pressure not only improves the precision of downstream equipment but also extends the service life of pneumatic components.
Despite the massive power output, maintenance is remarkably simple. The removal of drive gears and belts eliminates several mechanical failure points. AIRERA uses large-capacity oil-gas separation systems and long-life precision filters to extend service intervals. Combined with our smart monitoring system, you can schedule maintenance based on actual run-time, avoiding over-servicing and minimizing Total Cost of Ownership (TCO).
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.