SpaceLogic KNX 4 Channel Hybrid Switch Actuator Manual Control MTN6700-0104

Price Negotiable

Price: Negotiable

MOQ: 5

Delivery Time: 7 days

Brand: Schneide

Product Description

SpaceLogic KNX 4-Channel Hybrid Switch Actuator MTN6700-0104

Professional Schneide Electric actuator with manual control in white finish, designed for advanced building automation systems.

KNX Software Functions

Core Functions	Live signal, enabling safety priority function, central control of switching/curtains function, sending delay after bus voltage recovery

Actuator Functions

Switching Actuator Functions

Basic Functions	Preset, Logic, Threshold, Safety, Forced, Locking, Central, Time function for each channel
Scene Functions	Including delay, flashing and staircase timer
Bus Voltage Fault Recovery	Relay state after bus voltage failure/recovery; object value of the Switch object after voltage recovery
Status Feedback	Status feedback/ETS download object per channel

Heating Actuator Functions

Control Protocol	PWM cycle time (continuous), 1 bit/1 byte control telegram
Additional Functions	Valve protection, Safety, Locking, Forced, Cyclic continuous operation, Operation as NC/NO
Bus Voltage Fault Recovery	Valve position after bus voltage failure or recovery
Status Feedback	KNX Response value when contact is opened or closed

Power Supply & Electrical Parameters

Power Supply	KNX Bus
Rated Current	9 mA, maximum 20 mA/24 V
KNX Power Consumption	≤ 840 mW
Nominal Voltage	AC 250 V; 50/60 Hz
Nominal Power per Contact	AC1 10 A operation (cosφ = 0.8) acc. with IEC 60947-4-1 AC3 6 A operation (cosφ = 0.45) acc. with IEC 60947-4-1
Relay Parameters	Switching frequency at rated load: Maximum 60 operation/min Mechanical service life: ≥ 1×10⁹ Inrush current: 320 A/2 ms

Load Compatibility

Load Type	Maximum Load Power
Incandescent lamp	2500 W
Fluorescent lamp	250 W
Electronic transformer for extra low voltage lamps (e.g., halogen lamps)	1100 W
Iron core transformer for extra low voltage lamps (e.g., halogen lamps)	900 W
LED lamp	300 W (cosφ ≥ 0.6); 150 W (0.5 ≤ cosφ < 0.6)
Capacitive loads	100 µF, 10 A, 140 µF
Motors	1500 VA (cosφ = 0.6)

Physical & Environmental Parameters

Protection Class	IP20
Insulation Category	Overvoltage category III, pollution degree 2
Operating Temperature	-5...+45℃
Storage Temperature	-25...+55℃
Transport Temperature	-25...+70℃
Maximum Humidity	93%, no condensation
Installation Height	As high as 2000 m above sea level
Dimensions (W×H×D)	72×90×64 mm

Connection & Contents

KNX Bus Connection	Bus connection terminal
Mains Connection Port	Screw terminal blocks, 2×6-gang
Contents	With bus connecting terminal and cable cover

Application Scenarios

Smart Buildings: Connects mechanical wall switches to control lighting, blinds, or HVAC (e.g., a light switch triggering KNX switch actuators).
Access Control & Security: Links door contacts, emergency buttons, or motion sensors to trigger alarms or lighting (e.g., fire alarm contacts activating emergency lighting).
Industrial Automation: Integrates with equipment limit switches or sensors to monitor machine status (e.g., elevator position signals linking to lobby lighting).
Hotel & Office Buildings: Connects occupancy sensors or card readers to automate energy-saving modes (e.g., guest card removal cutting off room power).