MTN6720-0008 Schneider KNX Dimming Actuator 8-Channel 1-10V Manual Switch White DIN Rail Multi-Zone Unit
The MTN6720-0008 is a DIN-rail control instrument from the Schneider Electric SpaceLogic KNX catalogue, designed to provide precise, silent, and durable actuation for lighting and shading networks. This module interprets bus telegrams into graduated control signals, enabling designers to create light scenes, adjust intensities, and protect expensive lamp equipment from harsh switching.
Inside its compact thermoplastic housing, dedicated control electronics are coupled with robust power stages that tolerate the inrush characteristics of switched-mode LED drivers and electronic transformers. Commissioning is performed through the standard ETS engineering tool, where each channel offers comprehensive parameters including minimum brightness, soft-start time, and bus-failure response.
The front face provides accessible programming push-buttons and manual override controls, allowing technicians to operate loads even before the bus network is active. Manufactured under ISO-certified processes with eco-conscious materials, the device carries full conformity documentation for regulated markets across the Middle East, Europe, and Asia.
| Part Number | MTN6720-0008 |
| Device Role | 8-ch 1-10V Dimming Actuator White |
| Control Protocol | KNX TP1 S-Mode |
| Channel Layout | 8 analog 1-10V dimming channels |
| Power Stage Rating | 8 x 1-10V outputs with per-channel switch relays |
| Bus Feed | 21-30V DC SELV from KNX line |
| Mains Compatibility | 50/60 Hz networks; isolated load side |
| Dimming Principle | Phase-cut control for resistive, inductive, and capacitive loads |
| Protection Features | Overtemperature cutoff, short-circuit resilient output stages |
| Manual Provision | Manual switches per channel on front |
| Enclosure | DIN rail TH35 mounting per EN 60715; grey or white variants |
| Climate Rating | -5°C to +45°C ambient; IP20 when installed |
| Connection | Screwless or screw terminals accepting 0.5-4 mm² conductors |
| Approvals | CE, RoHS, REACH, KNX certified, Schneider Green Premium profile |
| Engineering Support | ETS application programs with scene, logic, and timer modules |
This eight-zone dimming hub is designed for auditoriums, galleries, and open-plan workspaces with multiple independent lighting rows. Facility staff can group the eight channels into zones of four for symmetrical control, and the front manual switches enable rapid scene correction during events or exhibitions.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.