Custom Coagulant Flocculant Anionic Cationic Polyacrylamide PAM For Sewage Treatment Chemical
Water-soluble high polymer with linear structure, high molecular weight, low hydrolysis degree, and strong flocculation capability. Effectively reduces friction resistance between liquids.
City sewage treatment, food processing, metallurgy, dyeing industry, mineral processing industry, sugar industry and various kinds of industrial wastewater treatment.
Adding polyacrylamide before sludge dewatering can produce larger flocculation mass, which is not easy to disperse during pressure filtration and has high dewatering efficiency.
Polyacrylamide is widely used in oilfield chemicals such as clay anti-expansion agents, thickeners for oil field acidification,and oily wastewater treatment agents.
| Parameter | Anionic | Cationic | Nonionic |
|---|---|---|---|
| Appearance | White Powder | White Powder | White Powder |
| Application | Sewage/Water Treatment | Sewage/Water Treatment | Sewage/Water Treatment |
| Ionic Charge | Anionic | Cationic | Nonionic |
| Molecular Weight | 5-27 Million | 6-15 Million | 5-12 Million |
| Ion/Hydrolysis Degree | 10%-90% | 5%-80% | <5% |
| Solid Content | ≥90% | ≥90% | ≥90% |
| Particle Size | 20-80 Mesh | 20-80 Mesh | 20-80 Mesh |
| Dissolving Time | ≤45 minutes | <60 minutes | <90 minutes |
| Parameter | Anionic | Cationic | Nonionic |
|---|---|---|---|
| Appearance | Milky to light yellow emulsion | Milky to light yellow emulsion | Milky to light yellow emulsion |
| Application | Sewage/Water Treatment | Sewage/Water Treatment | Sewage/Water Treatment |
| Ionic Charge | Anionic | Cationic | Nonionic |
| Molecular Weight | High - Very High | ||
| Ion/Hydrolysis Degree | High - Very High | ||
| Solid Content | 25%-50% | ||
| Dissolving Time | ≤10 minutes | ||
- Polyacrylamide can't be put directly into sewage, so dissolve in water before using Polyacrylamide.
- The dissolved water should be clean water, and without heating, but the temperature can't be cold. The temperature is higher than five degrees Celsius. Otherwise it will be dissolve very slowly.Temperature above 40 degrees Celsius affect the use effect.
- Notice: Don't use strong acid, strong base, high salt water preparation.
- The ratio range is recommended to be between 0.1% and 0.3%. For example, 1 liter of water with 1~3g of agents.
- If because of other reasons, the dispersion is not good, we suggest that you mix a little more sparse.
- The water is warmer in Summer. Cationic, Anionic Polyacrylamide should be strict for about 1 hour. Nonionic Polyacrylamide should be strict for about 2 hours.
- The water is cold in Winter, Cationic, Anionic Polyacrylamide should be strict for about one and a half hours. Nonionic Polyacrylamide should be strict for about 3 hours.
- Prepare 0.1% concentration water solution using neutral, desalted water
- Disperse product evenly in stirring water; warming water (below 60°C) accelerates dissolution
- Determine optimal dosage through preliminary testing; adjust water pH before treatment
- Solid product: Packed in inner plastic bags within polypropylene woven bags (25kg per bag)
- Colloidal product: Packed in inner plastic bags within fiber plate drums (50kg or 200kg per drum)
- Store sealed in dry, cool location below 35°C (product is hygroscopic)
- Prevent powder scattering on ground to avoid slipperiness from hygroscopic properties
High molecular weight Polyacrylamide Flocculant (PAM Polymer) for water treatment, available in anionic, cationic, and nonionic forms with solid content ≥90%.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.