Flocculant Cationic Polyacrylamide (CPAM) for Livestock and Pig Feed Mills Wastewater
Price:
USD1500-2500
MOQ:
1 MT
Delivery Time:
7-`5 WORKING DAYS
Brand:
OYI POLYMER
Product Description
Flocculant Cationic Polyacrylamide (CPAM) for Livestock and Pig Feed Mills Wastewater
Flocculant Cationic Polyacrylamide (CPAM) is a high-efficiency water-soluble polymer specially designed for livestock farms and pig feed mills wastewater treatment. It effectively aggregates suspended solids, organic matter, and sludge particles, enabling rapid solid-liquid separation and improved clarification performance.
This product is widely used in pig farm wastewater, feed processing wastewater, slaughterhouse effluent, and agricultural sewage treatment systems.
OYIFLOC Cationic Polyacrylamide Specifications
| Appearance | White Powder |
| Mass fraction of polymer content | ≥89% |
| Charge degree: | 5-80% |
| Molecular weight | 8-15 million |
| Mass fraction of acrylamide monomer | ≤0.25% |
| Dissolving time (1g/L) | ≤60min |
| Mass fraction of water-insoluble substances | ≤0.2% |
Main Applications
- Livestock farm wastewater treatment
- Pig feed mills wastewater clarification
- Sludge dewatering and thickening
- Organic-rich industrial wastewater treatment
- Agricultural and animal husbandry sewage systems
Product Advantages
-
High flocculation efficiency at low dosage
-
Fast settling speed and clear supernatant
-
Strong sludge dewatering performance
-
Reduces COD, BOD, and suspended solids
-
Cost-effective and easy to use
Product Forms
Anionic Polymer Flocculant Powder |
Anionic Polymer Flocculant Emulsion |
|
|
|
|
|
Usage Instructions
Preparation:
Dissolve CPAM in clean water to make a 0.1%–0.3% aqueous solution. Stir slowly to avoid clumping.
Application:
Add the prepared solution evenly into the wastewater system.
Dosage:
Typical dosage is 1–10 ppm, depending on wastewater characteristics.
Mixing:
Allow proper mixing and reaction time for optimal floc formation.
How to use OYIFLOC Anionic Polymer Flocculant?
-
Prepare stock solution if using powder: dissolve X–Y g/L in water (adjust per lab test). Stir for 30–60 minutes until fully hydrated.
-
Liquid product: dilute to recommended working concentration per technical sheet.
-
Typical dosage range: 0.1–10 mg/L (vary by application and water quality). Perform jar test to determine optimal dose.
-
Add flocculant after coagulation stage or directly to influent stream; mix gently then allow settling. Adjust pH and dose based on jar test results.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
WUXI OYI ENVIRONMENTAL TECHNOLOGY CO LTD
Location
NO.01, YIXING ECONOMIC DEVELOPMENT ZONE, JIANGSU, CHINA, 214200
Contact Person
Doris