Ceramic capacitor designed for energy saving lamps and power chargers AIDE CAPACITOR 1210X7R225K500NT multi layer type
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This product is a Multi-Layer Ceramic Capacitor (MLCC) designed for high-voltage applications. It is suitable for coupling, wave filtering, and resonant functions in various power supply and energy-saving lamp circuits. Key application fields include switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight unit power supplies, and amperites for energy-saving lamps. These are medium and high voltage MLCCs.
Product Attributes
- Terminal Composition: Au/Ag-Ni-Sn (From the inside out)
- RoHS Compliance: Meets standard
- REACH Compliance: Meets standard
Technical Specifications
| Item | Description/Specification | Testing Method |
|---|---|---|
| Application Field | Coupling, wave filtering, resonant in high voltage circuits (switch power supplier, AC-DC power charger, DC-DC power charger, networking/Communication interface, LCD backlight unit power supplier, amperite of energy saving lamps, etc.) | N/A |
| Testing Condition | Normal Condition: Temperature: 15~35, Humidity: 45~75%RH, Atmosphere: 86~106kPa | N/A |
| Relative Condition: Temperature: 252, Humidity: 60~70%RH, Atmosphere: 86~106kPa | N/A | |
| Initial Capacitance Testing: Pre-heating 150 for 1 hour, then place 48 hours under normal pressure & temperature. | N/A | |
| Part Number Description Example | 1812 X7R 684 M 251 N T | N/A |
| Dimension Codes | 0201 (0.02*0.01 inch / 0.50*0.25 mm) 0402 (0.04*0.02 inch / 1.00*0.50 mm) 0603 (0.06*0.03 inch / 1.60*0.80 mm) 0805 (0.08*0.05 inch / 2.00*1.25 mm) 1206 (0.12*0.06 inch / 3.20*1.60 mm) 1210 (0.12*0.10 inch / 3.20*2.50 mm) 1808 (0.18*0.08 inch / 4.50*2.00 mm) 1812 (0.18*0.12 inch / 4.50*3.20 mm) 1825 (0.18*0.25 inch / 4.50*6.30 mm) 2211 (0.22*0.11 inch / 5.70*2.8 mm) 2225 (0.22*0.25 inch / 5.70*6.30 mm) | N/A |
| Temperature Characteristic Codes | C0G (030 PPM/), X7R (15%), X5R (15%) | N/A |
| Nominal Capacitance Code | 8R0=8.0pF, 100=10pF, 101=100pF | N/A |
| Capacitance Tolerance Codes | B:0.1pF, C:0.25pF, D:0.5pF, F:1%, G: 2%, J:5%, K:10%, M:20%, Z:+80%/-20% | N/A |
| Rated Voltage (DC) Codes | 250=25V, 251=250V, 252=2500V | N/A |
| Packing Codes | T: Tape/Reel, P: Bag packing (PE) | N/A |
| Dimensions (mm) | 0201 (0603): L 0.600.10, W 0.300.05, T 0.300.05, WB 0.100.05 | Digital Caliper |
| 0402 (1005): L 1.000.15, W 0.500.15, T 0.500.10, WB 0.200.10 | Digital Caliper | |
| 0603 (1608): L 1.600.20, W 0.800.15, T 0.800.15, WB 0.300.10 | Digital Caliper | |
| 0805 (2012): L 2.000.20, W 1.250.20, T 0.800.20, WB 0.500.20 | Digital Caliper | |
| 1206 (3216): L 3.200.30, W 1.600.30, T 1.000.20, WB 0.600.30 | Digital Caliper | |
| 1210 (3225): L 3.200.30, W 2.500.30, T 2.70, WB 0.800.30 | Digital Caliper | |
| 1808 (4520): L 4.500.40, W 2.000.20, T 2.70, WB 0.800.30 | Digital Caliper | |
| 1812 (4532): L 4.500.40, W 3.200.30, T 3.50, WB 0.800.30 | Digital Caliper | |
| 1825 (4563): L 4.500.40, W 6.300.50, T 3.50, WB 0.800.30 | Digital Caliper | |
| 2220 (5750): L 5.700.50, W 5.000.50, T 3.50, WB 1.000.40 | Digital Caliper | |
| 2225 (5763): L 5.700.50, W 6.300.50, T 6.20, WB 1.000.40 | Digital Caliper | |
| Temperature Range | -55~+125 | N/A |
| Static Capacity Tolerance | NPO: 1MHz10%, 1.00.2Vrms (1000pF); 1KHz10%, 1.00.2Vrms (>1000pF) X7R/X7T/X7P: 1KHz10%, 1.00.2Vrms (10uF); 120Hz24, 0.50.1Vrms (>10uF) | N/A |
| Dissipation Factor (DF) | NPO: DF0.56 (Cr5pF); DF1.5[(150/Cr)+7]10-4 (5pFCr50pF); DF0.15% (50pFCr). Testing frequency 110%MHz, Voltage 1V0.2rms (Cr1000pF); Testing frequency 110%KHz, Voltage 1V0.2rms (Cr1000pF). X7R/X7T/X7P: DF see Note 1. | N/A |
| Insulation Resistance (IR) | NPO: IR50000M (C10nF); IR*Cr500S (C10nF). Testing condition: Rated voltage, Time: 605s, Humidity: 75%, Temperature: 255, Current: 50mA. X7R/X7T/X7P: IR10000M (C25nF); IR*Cr100S (C25nF). | N/A |
| Hi-pot (DC) | Ur=100V: 2.5 x rated voltage; Ur=200V/250V: 2.0 x rated voltage; Ur=450/500/630V: 1.5 x rated voltage; 1KVUr2KV: 1.2 x rated voltage; 2KVUr: 1.1 x rated voltage. Voltage Raising time: 110S, Voltage maintaining time: 2S | N/A |
| Solderability | Soldering area 90%. Visual-No damage. | Pre-heating temperature 80-120, time 10-30s, lead free solder, flux. Soldering temperature 2455, Solder time 20.5s. |
| Resistance to the heat of soldering | Visual-No damage, soldering area 90%. | Pre-heating temperature 100-200, time 102s, soldering temperature: 2655, Soldering time: 51s. Cleaning with solvent. Room temperature, time: 242 hours. |
| Electrostatic Capacity Change Rate | NPO: C/C0.5% or 0.5pF (larger reading). X7R: C/C15%. X7T: -33% C/C22%. X7P: C/C10%. | N/A |
| Flexural Strength | No damage. Electro static capacity change rate C/C10%. | Base board: Al2O3 /PCB. PCB dimension: Thickness: 1.6mm, Length: 100mm, Width: 40mm. Flexural depth: 1mm. Bend speed: 0.5mm/sec. |
| Terminal Bonding Strength | No visual damage. | Applied Force: 5N, Duration: 101S. |
| Thermal Shock | NPO: C/C2.5% or 0.25pF (larger reading). X7R/X7P: C/C0.5%. X7T: C/C10%. | Pre-condition(X7R h characteristic): Upper limit temperature 1 hour, place 241 hours, start testing. Run 5 cycles Thermal shock. Test after place 242 hours normal temp & humidity. |
| Temperature Moisture Exposure | Visual: No visual damage. Capacitance change rate: NPO: C/C2% or 1pF (larger reading). X7R/X7T/X7P: C/C10%. DF 2 times initial standard. IR: NPO: IR2500M or IR*Cr25S (lower reading). X7R/X7T/X7P: IR1000M or IR*Cr25S (lower reading). | Temperature 402, Humidity 90~95%RH, time 50024 hours. Test after place 242 hours normal temp & humidity. |
| High Temperature Exposure | Visual: No visual damage. Capacitance change rate: NPO: C/C2% or 1pF (larger reading). X7R/X7T/X7P: C/C20%. DF 2 X initial standard. IR: NPO: IR4000M or IR*Cr40S (lower reading). X7R/X7T/X7P: IR2000M or IR*Cr50S (lower reading). | Temperature 1253, Time 100048 hours. Voltage: 100VV250V (2x Rated voltage), 250VV1KV (1.5x rated voltage), 1KVV (1.2x rated voltage). Test after place 48 hours under normal pressure & temperature. |
| PCB Flexural Strength | No crack and other defect. | Soldering the MLCC on the PCB, then pressing direction based on the photo. |
| Embossed Plastic Taping Dimensions | 0805: Tape size A 1.550.20, B 2.350.20, C 8.000.20, D 3.500.05, E 1.750.10, F 4.000.10, G 2.000.10, H 4.000.10, J 1.50 -0/+0.10, T 1.50 Max. 1206: Tape size A 1.950.20, B 3.600.20, C 8.000.20, D 3.500.05, E 1.750.10, F 4.000.10, G 2.000.10, H 4.000.10, J 1.50 -0/+0.10, T 1.85 Max. 1210: Tape size A 2.700.10, B 3.420.10, C 8.000.10, D 3.500.05, E 1.750.10, F 4.000.10, G 2.000.05, H 4.000.10, J 1.55 -0/+0.10, T 3.2 Max. 1808: Tape size A 2.200.10, B 4.950.10, C 12.000.10, D 5.500.05, E 1.750.10, F 4.000.10, G 2.000.05, H 4.000.10, J 1.50 -0/+0.10, T 3.0 Max. 1812: Tape size A 3.660.10, B 4.950.10, C 12.000.10, D 5.500.05, E 1.750.10, F 8.000.10, G 2.000.05, H 4.000.10, J 1.55 -0/+0.10, T 4.0 Max. | N/A |
| Paper Tape Reel Packing Dimensions | 1005: Paper size W1 0.240.02, L1 0.450.02, D 8.000.10, C 3.500.05, B 1.750.10, P1 2.000.05, P2 2.000.05, P0 4.000.10, d 1.50 -0/+0.10, t Below 0.30. 0201: Paper size W1 0.370.10, L1 0.670.10, D 8.000.10, C 3.500.05, B 1.750.10, P1 2.000.05, P2 2.000.05, P0 4.000.10, d 1.50 -0/+0.10, t Below 0.80. 0402: Paper size W1 0.650.10, L1 1.150.10, D 8.000.10, C 3.500.05, B 1.750.10, P1 2.000.05, P2 2.000.05, P0 4.000.10, d 1.50 -0/+0.10, t Below 0.80. 0603: Paper size A 1.100.10, B 1.900.10, C 8.000.10, D 3.500.05, E 1.750.10, F 4.000.10, G 2.000.10, H 4.000.10, J 1.50 -0/+0.10, T 1.10 Max. 0805: Paper size A 1.450.15, B 2.300.15, C 8.00.15, D 3.500.05, E 1.750.10, F 4.000.10, G 2.000.10, H 4.000.10, J 1.50 -0/+0.10, T 1.10 Max. 1206: Paper size A 1.800.20, B 3.400.20, C 8.000.20, D 3.500.05, E 1.750.10, F 4.000.10, G 2.000.10, H 4.000.10, J 1.50 -0/+0.10, T 1.10 Max. | N/A |
| Reel Dimensions | 7' Reel: 1782.0, 3.0, 130.5, 210.5, 21 or Bigger, 1010.5, 12max. 13' Reel: 3302.0, 3.0, 130.5, 210.5, 21 or Bigger, 1010.5, 12max. | N/A |
| Top Tape Peeling Strength | 0.1N < peeling strength < 0.7N. No paper dirty remains on the scotch when peeling, and sticks to top and bottom tape. | Standard |
| Packing Quantity | Paper T/R (Pcs): 0603: 4000, 0805: 4000, 1206: 4000. Plastic T/R (Pcs): 0805: 3000 (T1.35mm), 1206: 3000 (T1.60mm), 1210: 2000 (T1.85mm), 1812: 1000 (T1.85mm). | N/A |
| Soldering Method | RReflow Soldering, WWave Soldering. Refer to Recommended Soldering Method table for specific size/characteristic combinations. | N/A |
| Soldering Temperature Profile | Preheating: Keep temperature difference between soldering temperature and surface temperature of chips as T150. | N/A |
Note 1: X7R/X5R/X6S/X7S/Y5V Rated Voltage and DF Exception details are provided in the original document and can be referenced for specific values.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina