High voltage MLCC AIDE CAPACITOR 1206M3L223J500NT designed for AC DC converters LCD backlight and energy saving lamps
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
High-voltage multilayer ceramic capacitors (MLCCs) designed for coupling, filtering, and resonant applications in high-voltage electronic circuits. Suitable for use in switching power supplies, AC-DC and DC-DC converters, network/communication interfaces, LCD module backlight power supplies, and energy-saving lamp ballasts.
Product Attributes
- Temperature Characteristics: C0G (030 PPM/), X7R (15%)
- Terminal Material: Copper-Nickel-Tin (inner to outer)
- Packaging Options: Tape & Reel (T), Bulk (P)
- Environmental Compliance: RoHS Directive, REACH Regulation (SVHC)
Technical Specifications
| Item | Specification | Test Method |
|---|---|---|
| Product Dimensions (Code) | 0201: 0.50*0.25 mm (0.02*0.01 inch) 0402: 1.00*0.50 mm (0.04*0.02 inch) 0603: 1.60*0.80 mm (0.06*0.03 inch) 0805: 2.00*1.25 mm (0.08*0.05 inch) 1206: 3.20*1.60 mm (0.12*0.06 inch) 1210: 3.20*2.50 mm (0.12*0.10 inch) 1808: 4.50*2.00 mm (0.18*0.08 inch) 1812: 4.50*3.20 mm (0.18*0.12 inch) 1825: 4.50*6.30 mm (0.18*0.25 inch) 2211: 5.70*2.8 mm (0.22*0.11 inch) 2225: 5.70*6.30 mm (0.22*0.25 inch) | N/A |
| Nominal Capacitance | Example: 473 = 47nF (three-digit method) | N/A |
| Capacitance Tolerance | B:0.1pF, C:0.25pF, D:0.5pF, F:1%, G:2%, J:5%, K:10%, M:20%, Z:+80%/-20% | N/A |
| Rated Voltage (DC) | Example: 500 = 50V, 101 = 100V, 151 = 150V (three-digit method) | N/A |
| Product Structure | 1. Ceramic Dielectric, 2. Internal Electrode, 3. External Electrode, 4. Nickel Layer, 5. Tin Layer | N/A |
| Product Dimensions (Model 1206) | Size (mm): L: 3.200.20, W: 1.600.20, T: 1.250.20, WB: 0.30-0.8 Imperial Representation: 1206 | N/A |
| Operating Temperature Range | -55 ~ +85 | Visual inspection, Vernier caliper measurement |
| Appearance & Dimensions | No visible damage, Dimensions meet specifications | Visual inspection, Vernier caliper measurement |
| Capacitance | Within specified tolerance | 10uF: 1KHz10%, 1.00.2Vrms 10uF: 120Hz24, 0.50.1Vrms |
| Dissipation Factor (DF Value) | <0.1% | Cr10uF: 1KHz10%, 1V0.1rms Cr10uF: 120Hz24, 0.5V0.1rms |
| Insulation Resistance | >1 G | Test Voltage: 250V, Test Time: 605 sec, Test Humidity: 70%, Test Temperature: 255 |
| Dielectric Withstanding Voltage (DC) | No dielectric breakdown or damage | Test Voltage: Rated Voltage, Test Time: 2 sec |
| Solderability | Soldering rate 95%, pinholes or rough area <5%, no visible damage | Preheat 80-120/10-30 sec, Lead-free solder, Flux, Solder Temp: 2455, Immersion Time: 21 sec |
| Solder Heat Resistance | Appearance: No visible damage, Soldering rate 95% | Preheat: 120-150/60 sec, Solder Pot Temp: 2705, Immersion Time: 101 sec. Electrodes fully immersed. Clean with solvent. Store at room temp for 242 hours. Capacitance change rate: -2.5% < C/C 2.5%. DF Value: Same as NO4. IR: Same as NO5. |
| Bending Strength | No visible damage | Test Substrate: Al2O3 or PCB (1.6mm thick, 100mm length, 40mm width). Bending Depth: 1mm, Pressing Speed: 1mm/sec. Measurements taken under bent state. Capacitance Change Rate: C/C5%. |
| Terminal Bond Strength | No visible damage | N/A |
| Temperature Cycling | N/A | Pre-treatment: Upper temp 1 hr, store 241 hr, initial measurement. 5 temp cycles: -55 (30 min), 25 (2-3 min), +85 (30 min), 25 (2-3 min). Store at room temp/humidity for 242 hours before testing. Capacitance Change Rate: C/C2.5%. |
| Damp Heat Test | Appearance: No visible damage | Temperature: 402, Humidity: 90-95%RH, Time: 50024 hours. Store at room temp/humidity for 24 hours after test. Capacitance Change Rate: C/C5%. DF Value: 2 times initial standard. IR: >500M. |
| High Temperature Load Test | Appearance: No visible damage | Store at room temp/humidity for 242 hours after test. Temperature: 85, Time: 100048 hours, Voltage: 1.5x Rated Voltage (100VV250V). Capacitance Change Rate: C/C5%. DF Value: 2 times initial standard. IR: >500M. |
| Tape & Reel Packaging Dimensions (1206) | A: 1.950.20, B: 3.600.20, C: 8.000.20, D: 3.500.05, E: 1.750.10, F: 4.000.10, G: 2.000.10, H: 4.000.1, J: 1.50 -0/+0.10, T: 1.85 Max | T1.35mm: 3000 Pcs/Reel T1.35mm: 2000 Pcs/Reel |
Test Conditions:
- Standard State: Room Temperature (20-30), Relative Humidity (<70%RH), Atmospheric Pressure (86-106kPa)
- Standard Relative State: Room Temperature (252), Relative Humidity (60-70%RH), Atmospheric Pressure (86-106kPa)
Note on Initial Measurement for NO3, 11, 12, 13: Preheat at 150 for 1 hour, then store at standard temperature and pressure for 48 hours before testing.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina