AIDE CAPACITOR 0603C0G201J500NT MLCC for in switch power supplies AC DC DC DC power chargers and energy saving lamps
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This product is a Multi-layer Ceramic Capacitor (MLCC) designed for high-voltage applications. It is utilized for coupling, wave filtering, and resonant functions in various power supply circuits, including switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight unit power supplies, and energy-saving lamps. These MLCCs are suitable for medium and high voltage applications.
Product Attributes
- Material: Ceramic dielectric, Inner electrode, Outer electrode
- Terminal Composition: Au/Ag-Ni-Sn (from inside out)
- Compliance: ROHS/REACH
Technical Specifications
| Item | Description | Specification/Requirement | Testing Method | |
|---|---|---|---|---|
| Application Field | Coupling, wave filtering, resonant in high voltage circuits (switch power supplier, AC-DC power charger, DC-DC power charger, networking/Communication interface, LCD backlight unit power supplier, amperite of energy saving lamps, etc. (Medium and High voltage MLCC)). | |||
| Testing Condition | Normal Condition | Temperature: 15~35, Humidity: 45~75%RH, Atmosphere: 86~106kPa | (No special requirements) | |
| Relative Condition | Temperature: 252, Humidity: 60~70%RH, Atmosphere: 86~106kPa | For data not matching testing specification | ||
| Part Number Description | Example: 1812 X7R 684 M 251 N T | |||
| Item | Description | |||
| 1 Dimension Code | 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2211, 2225 | (Dimensions in inch and mm provided) | ||
| 2 Temperature characteristic | C0G (030 PPM/), X7R (15%), X5R (15%) | |||
| 3 Nominal electrostatic capacity | 8R08.0, 10010, 101100 (pF) | |||
| 4 Tolerance of electrostatic capacity | B:0.1pF, C:0.25pF, D:0.5pF, F:1%, G: 2%, J:5%, K:10%, M:20%, Z:+80%/-20% | |||
| 5 Rated voltage (DC) | 250 25, 251 250, 252 2500 (V) | |||
| 6 Terminal composition | Au/Ag-Ni-Sn (From the inside out) | |||
| 7 Packing | T Tape/Reel, P Bag packing (PE) | |||
| Construction | Item | Description | ||
| 1 Ceramic dielectric | ||||
| 2 Inner electrode | ||||
| 3 Outer electrode | ||||
| 4 Nickle layer | ||||
| 5 Tin layer | ||||
| Dimension | Part number | Dimension (mm) | British system / Metric system | |
| 0201 | 0.600.10 (L), 0.300.05 (W), 0.300.05 (T), 0.100.05 (WB) | 0603 | ||
| 0402 | 1.000.15 (L), 0.500.15 (W), 0.500.10 (T), 0.200.10 (WB) | 1005 | ||
| 0603 | 1.600.20 (L), 0.800.15 (W), 0.800.15 (T), 0.300.10 (WB), 0.600.10 (WB) | 1608 | ||
| 0805 | 2.000.20 (L), 1.250.20 (W), 0.800.20 (T), 1.000.20 (WB), 0.500.20 (WB), 1.250.20 (WB), 0.800.20 (WB) | 2012 | ||
| 1206 | 3.200.30 (L), 1.600.30 (W), 1.000.20 (T), 1.250.20 (WB), 0.600.30 (WB), 1.600.30 (WB) | 3216 | ||
| 1210 | 3.200.30 (L), 2.500.30 (W), 2.70 (T), 0.800.30 (WB) | 3225 | ||
| 1808 | 4.500.40 (L), 2.000.20 (W), 2.70 (T), 0.800.30 (WB) | 4520 | ||
| 1812 | 4.500.40 (L), 3.200.30 (W), 3.50 (T), 0.800.30 (WB) | 4532 | ||
| 1825 | 4.500.40 (L), 6.300.50 (W), 3.50 (T), 0.800.30 (WB) | 4563 | ||
| 2220 | 5.700.50 (L), 5.000.50 (W), 3.50 (T), 1.000.40 (WB) | 5750 | ||
| 2225 | 5.700.50 (L), 6.300.50 (W), 6.20 (T), 1.000.40 (WB) | 5763 | ||
| Specification and testing method | 1 Temperature | -55~+125 | ||
| 2 Visual/ Dimension | 1, No Damage; 2, Dimension meet Spec | Naked eye (Visual inspection), Digital calliper | ||
| 3 Static capacity | Meet standard specification and tolerance | NPO characteristic: 1MHz10%, 1.00.2Vrms (1000pF); 1KHz10%, 1.00.2Vrms (>1000pF). X7R/X7T/X7P characteristic: 1KHz10%, 1.00.2Vrms (10uF); 120Hz24, 0.50.1Vrms (>10uF). | ||
| 4 Dissipation factor (DF) | NPO Characteristic: DF0.56, Cr5 pF; DF1.5[(150/Cr)+7]10-4 (5pFCr50pF); DF0.15%, (50pFCr). Cr1000pF, 110%MHz, 1V0.2rms. Cr1000pF, 110%KHz, 1V0.2rms. X7R/X7T/X7P characteristic: see Note 1. Cr10uF, 110%KHz, 1V0.1rms. Cr10uF, 12024Hz, 0.5V0.1rms. | |||
| 5 IR Insulation Resistance | NPO Characteristic: IR50000M,C10nF; IR*Cr500S,C10nF. X7R/X7T/X7P Characteristic: IR10000M,C25nF; IR*Cr100S,C25nF. Testing condition: Rated voltage, Time: 605s, Humidity: 75%, Temperature: 255, Current: 50mA | |||
| 6 Hi-pot (DC) | No dielectric breakdown or damage. Ur=100V, 2.5 x rated voltage; Ur=200V/250V, 2.0 x rated voltage; Ur=450/500/630V, 1.5 x rated voltage; 1KVUr2KV, 1.2 x rated voltage; 2KVUr, 1.1 x rated voltage. Voltage Raising time: 110S, Voltage maintaining time: 2S | |||
| 7 Solderability | soldering area90% | Visual-No damage. Pre-heating temperature 80-120, time 10-30s, lead free solder, flux. Soldering temperature 2455, Solder time 20.5s. | ||
| 8 Resistance to the heat of soldering | Visual-No damage, soldering area90% | Pre-heating temperature 100-200, time 102 s, soldering temperature: 2655, Soldering time: 51s. Cleaning with solvent. Room temperature, time: 242 hours. | ||
| Electrostatic capacity change rate | NPO Characteristic: C/C0.5% or 0.5pF (larger reading); X7R: C/C15%; X7T: -33% C/C22%; X7P: C/C10% | |||
| DF | Refer to NO#4 | |||
| IR | Refer to NO#5 | |||
| 9 Flexural strength | No damage | Base board: Al2O3 /PCB. PCB dimension: Thickness: 1.6mm, Length: 100mm, Width: 40mm. Flexural depth: 1mm, Bend speed: 0.5mm/sec. Test it under the flexural status. Electro static capacity change rate C/C10%. Flexural deepth 452. | ||
| 10 Terminal bonding strength | No visual damage | Applied Force: 5N, Duration: 101S | ||
| 11 Thermal shock | NPO Characteristic: C/C2.5% or 0.25pF (larger reading); X7R/X7P- characteristic: C/C0.5%; X7T characteristic: C/C10% | Pre-condition(X7R h characteristic): Upper limit temperature 1hour, place 241 hours, start to testing. Run 5 cycles Thermal shock. Test it after place 242 hours normal temp & humidity. | ||
| 12 Temperature moisture exposure | Visual No visual damage | Test it after place 242 hours normal temp & humidity. Temperature 402, Humidity 90~95%RH, time 500+24 hours. Electrost atic capacitance change rate: NPO characteristic: C/C2% or 1pF (larger reading); X7R/X7T/X7P characteristic: C/C10%. DF 2 times initial standard. IR: NPO characteristic: IR2500M or IR*Cr25S (Lower reading); X7R/X7T/X7P: IR1000M or IR*Cr25S (Lower reading). | ||
| 13 High temperature exposure | Visual No visual damage | Test it after place 48 hours under normal pressure & temperature. Temperature 1253, Time 100048 hours. Voltage: 100VV250V 2x Rated voltage; 250VV1KV 1.5x rated voltage; 1KVV 1.2x rated voltage. Electrost atic capacitance change rate: NPO: C/C2% or 1pF (larger reading); X7R/X7T/X7P: C/C20%. DF 2 X initial standard. IR: NPO: IR4000M or IR*Cr40S (Lower reading); X7R/X7T/X7P: IR2000M or IR*Cr50S (Lower reading). | ||
| 14 PCB flexural strength | No crack and other defect | IR Soldering the MLCC on the PCB (Photo1), Then pressing direction base on the photo 2. SIZE A B C. 0805(2012) 1.2 4 1.65; 1206(3216) 2.2 5 2; 1210(3225) 2.2 5 2.9; 1812(4532) 3.5 7 3.7; 2220(5750) 4.5 8 5.6. | ||
| Embossed Plastic Taping | Embossed tape reel packing for 0805(2012)~1812(4532) type | (Dimensions A, B, C, D, E, F, G, H, J, T provided for various codes) | ||
| Paper Tape Reel Packing | Paper tape reel packing for 10050402~12063216 | (Dimensions W1, L1, D, C, B, P1, P2, P0, d, t provided for various codes) | ||
| Structure of leader part and end part of the carrier paper | ||||
| Reel Dimensions | 7REEL 1782.0, 3.0 (A), 130.5 (B), 210.5 (C), 21 or Bigger (D), 1010.5 (E), 12max (F) | 13REEL 3302.0, 3.0 (A), 130.5 (B), 210.5 (C), 21 or Bigger (D), 1010.5 (E), 12max (F) | (unit: mm) | |
| Taping specification | Top tape peeling strength | 0.1N | (a) Paper Taping, (b) Embossed Taping | |
| Packing quantity | 7, ROHS/REACH compliance | 7.1 RoHS: meet the standard; 7.2 REACH: meet the standard | ||
| Precautions For Use | MLCCs may fail in short circuit mode under severe conditions. Follow "precautions for safety" and Application Notes. Contact engineering for handling questions. | |||
| Soldering Profile | Avoid cracks from sudden temperature change. Follow the temperature profile in the adjacent graph. | |||
| Manual Soldering | Risk of thermal cracks. Handle soldering iron carefully, pay attention to tip selection and temperature contact. | |||
| Optimum Solder Amount for Reflow Soldering | Recommended | |||
| Recommended Soldering Method | Size | Temperature Characteristics | Capacitance | Soldering Method |
| 1005 | NPO / R; X7R/X5R/X7S/X6S / R | / | / | |
| 0201 | NPO / R; X7R/X5R/X7S/X6S / R; Y5V / R | / | / | |
| 0402 | NPO / R; X7R/X5R/X7S/X6S / R; Y5V / R | / | / | |
| 0603 | NPO / R/W; X7R/X5R/X7S/X6S / C1uf R C1uf R/W; Y5V / C1uf R C1uf R/W | RReflow Soldering, WWave Soldering | ||
| 0805 | NPO / R/W; X7R/X5R/X7S/X6S / C4.7uf R C4.7uf R/W; Y5V / C1uf R C1uf R/W | |||
| 1206 | NPO / R/W; X7R/X5R/X7S/X6S / C10uf R C10uf R/W; Y5V / C10uf R C10uf R/W | |||
| 1210 | NPO / R; X7R/X5R/X7S/X6S / R; Y5V / R | |||
| The temperature profile for soldering | Preheating: keep temperature difference between soldering temperature and surface temperature of chips as T150. | |||
| Packing quantity | Size | Paper T/R (Pcs) | Plastic T/R (Pcs) | |
| 0603 | 4000 | |||
| 0805 | 4000 | 3000 (T1.35mm) | ||
| 1206 | 3000 (T1.35mm) | |||
| 1210 | 2000 (T1.60mm) | |||
| 1808 | 3000 (T1.60mm) | |||
| 1812 | 2000 | |||
| 1812 | 1000 (T1.85mm) | |||
| 800 (T1.85mm) | ||||
| 500 | ||||
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina