Industrial Aluminum Capacitor AISHI SPZ0JM471E08O00RER8K Featuring Conductive Polymer Electrolyte and Low ESR
Product Overview
The PZ series of Aluminum Solid Capacitors with Conductive Polymer Electrolyte are designed for reliable operation in demanding environments. These capacitors offer stable performance across a wide temperature range and are suitable for various industrial applications. Key features include low Equivalent Series Resistance (ESR) and high ripple current handling capabilities, ensuring efficient and durable performance.
Product Attributes
- Brand: AishiCAP
- Manufacturer: HUNAN AIHUA GROUP CO., LTD
- Origin: China
- Series: PZ
- Electrolyte Type: Conductive Polymer Electrolyte
Technical Specifications
| AISHI P/N | Rated Work Voltage (V.DC) | Nominal Capacitance (F) | Capacitance Tolerance (%) | Operating Temperature (C) | Nominal Case Size D*L (mm) | E.S.R (100KHz, 20C) (m max) | Leakage Current (20C, 2 Min/W.V) (A max) | D.F (%) (120Hz, 20C max) | Ripple Current (100KHz, 105C) (mA.rms) | Load Life (Hours) |
|---|---|---|---|---|---|---|---|---|---|---|
| SPZ0JM471E08O00RER8K | 6.3 | 470 | -20+20 | 105 | 6.3*8 | 8 | 592 | 8 | 5700 | 2000 |
General Specifications
| Item | Specification |
|---|---|
| Operating Temperature Range | -55 ~ +105 (2.5V ~ 100V) |
| Standard Measurement Temperature | 15 to 35 |
| Standard Measurement Humidity | 45 to 85% |
| Standard Measurement Air Pressure | 86kpa to 106kpa |
| High/Low Temp Impedance Ratio (-55C/+20C) | 0.75 to 1.25 |
| High/Low Temp Impedance Ratio (105C/+20C) | 0.75 to 1.25 |
| Vibration Resistance | JIS C 5102 8.2 and JIS C 5025 (10-55Hz, 0.75mm amplitude, 2 hrs/axis) |
| Solder Ability | 235 5 C for 2 0.5 seconds |
| Resistance to Soldering Heat | 260 5C for 101 seconds (Solder bath method) or 400 10 C for 3+1/-0 seconds (Soldering iron method) |
| Resistance to Damp Heat (Steady State) | 602, 90% ~ 95% RH for 1000 hrs (no load) |
| Rapid Change of Temperature | 5 cycles (no load) |
| Load Life Test | 2000 hours at 105 2 with rated DC voltage |
| Terminal Strength (Tensile) | Varies by lead wire diameter (5N to 20N) |
| Terminal Strength (Bending) | Varies by lead wire diameter (2.5N to 10N) |
| Storage Temperature | 5 to 35 (less than 3 months if 35 to 85) |
| Storage Humidity | 75% or less |
Marking
Marking ink color is red. Standard marking includes Year Code, Week Code, Series, Rated Voltage, Rated Capacitance, and Negative Polarity.
Packing
Available in bulk packing (standard and cutting). Details on case sizes, bag quantities, inner boxes, and outer cartons are provided for different capacitor diameters.
Operating Precautions
Polarity must be observed. Avoid use in high impedance, coupling, or time constant circuits. Do not exceed rated voltage. Sudden charge/discharge is restricted; use protection circuits if necessary. Soldering conditions must be within specified limits. Do not reuse assembled or energized capacitors. Leakage current may increase after one year of storage; pre-conditioning is recommended. Radial lead type capacitors are not suitable for reflow soldering. Handle with care after soldering. Consult Aihua Group for use in industrial or life-support systems. Avoid storage in humid, oily, or gas-filled environments.
Circuit Design Notes
Operate within specified ratings. High temperatures or excessive ripple current can shorten life. Leakage current may slightly increase after soldering but can self-repair with DC voltage. Applied voltage should ideally be less than 80% of rated voltage. Failure mode is primarily short circuit, potentially leading to overheating and case rupture.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.