Conductive Polymer Aluminum Electrolytic Capacitor AISHI SPZ1AM222G15O00RAXXX Designed for in System Boards and Display Cards

AISHi PZ Series Conductive Polymer Aluminum Electrolytic Capacitors

The AISHi PZ series offers conductive polymer aluminum electrolytic capacitors designed for high-performance applications. These capacitors feature low ESR and are suitable for a wide range of industrial uses, including system boards, display cards, small chargers, and intelligent TVs. They are RoHS compliant and lead-free, ensuring environmental responsibility.

Product Attributes

• Brand: AISHi
• Series: PZ Series
• Type: Conductive Polymer Aluminum Electrolytic Capacitor
• Compliance: RoHS Compliant, Lead-free

Technical Specifications

Part Numbering System

The part numbering system consists of the following codes:

• Category Code
• Series Code
• Size Code
• Capacitance Code
• Capacitance Tolerance Code
• Voltage Code
• Terminal Code
• Sleeve Marking Code

Standard Ratings (Examples)

Soldering Recommendations

Flow Soldering (Radial Lead Type)

• Preheating: 130 20C, 30-90 sec.
• Cooling: (1-3C)/sec. (max.)
• Soldering Temp.: Approx. 260C,

Reflow Soldering (Polymer SMD Type)

• Recommended Reflow Profile: See diagram.
• Preheating: 150C to 180C, Within 90 sec.
• Peak Temperature (T1): 230C to 260C (max. 10 sec.)
• Time above 200C (t1): Max. 50 sec.
• Time above T.C. (t2): Max. 150 sec.

Reflow Soldering (Liquid SMD Type)

• Case size: 6.3-10mm:
  • Preheat: 100C to 200C, Max. 180 sec.
  • Peak Temp. (T1): 230C to 250C (max. 5 sec.)
  • Duration over 200C (t): Max. 90 sec.
  • Duration over T.C.: Max. 40 sec.
• Case size: 12.5-18mm:
  • Preheat: 100C to 180C, Max. 150 sec.
  • Peak Temp. (T1): 230C to 240C (max. 5 sec.)
  • Duration over 200C (t): Max. 60 sec.
  • Duration over T.C.: Max. 30 sec.

Lead Forming Specifications

Code: C (Lead Forming & Cut)

Code: F (Lead Forming & Cut)

Code: J (Lead Forming & Cut)