RoHS Compliant Conductive Polymer Capacitors AISHI SPZ1EM561G12O00RAXXX for Electronic Applications
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Aishii PZ Series Conductive Polymer Aluminum Electrolytic Capacitors
Product Overview
The Aishii PZ series of conductive polymer aluminum electrolytic capacitors are designed for high-performance applications requiring low ESR and long endurance. These RoHS compliant and lead-free components are suitable for system boards, display cards, small chargers, and intelligent TVs. They offer reliable performance with a wide operating temperature range and robust construction.
Product Attributes
- Brand: Aishii
- Series: PZ Series
- Material: Conductive Polymer Aluminum Electrolytic
- Certifications: RoHS Compliant, Lead-free
Technical Specifications
General Specifications:
| Item | Specification |
|---|---|
| Category Code | E (Electrolytic Capacitor) |
| Type | Conductive Polymer |
| Temperature Range | -55 to +105C |
| Rated Voltage Range | 6.3 to 100Vdc |
| Nominal Capacitance Range | 4.7 to 5600F |
| Capacitance Tolerance | 20% (M) |
| DC Leakage Current | 0.2CV or 500A, whichever is greater (at 20C, 120Hz) |
| Dissipation Factor (tan) | See table below (at 20C, 120Hz) |
| ESR | See table below (100~300kHz, 20C) |
| Impedance Ratio at 100kHz (Temperature Characteristics) | Z(+105C)/Z(+20C) 1.25 Z(-55C)/Z(+20C) 1.25 |
| Endurance | +105C, 2,000 hours |
| Humidity Test | After 2,000 hours at 60C, 90%-95% RH (no voltage applied) |
| Surge Test | Meets requirements after 1,000 cycles of charge/discharge |
| Recommended Applications | System Board, Display Card, Small Charger, Intelligent TV |
Dissipation Factor (tan) Max. (at 20C, 120Hz):
| Rated Voltage (Vdc) | 6.3 | 6.8 | 7.5 | 10 | 16 | 25 | 35 | 50 | 63 | 100 |
|---|---|---|---|---|---|---|---|---|---|---|
| tan (max.) | 0.08 | 0.12 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 |
Standard Ratings:
| VDC (SV) | Cap (F) | Size DxL(mm) | ESR (m, 20C, 100kHz)(max.) | Rated ripple current (mArms/105C, 100kHz) | Leakage Current (A)(max.) |
|---|---|---|---|---|---|
| 6.3 (7.2) | 220 | 6.3x7.7 | 15 | 320 | 110 |
| 6.3 (7.2) | 270 | 6.3x9.5 | 13 | 380 | 132 |
| 6.3 (7.2) | 330 | 6.3x11.5 | 12 | 430 | 165 |
| 6.3 (7.2) | 390 | 6.3x13.5 | 11 | 470 | 195 |
| 6.3 (7.2) | 470 | 6.3x16 | 10 | 530 | 235 |
| 6.3 (7.2) | 560 | 6.3x18.5 | 9 | 580 | 280 |
| 6.3 (7.2) | 680 | 6.3x22 | 8 | 630 | 340 |
| 6.8 (7.8) | 470 | 8x7.7 | 12 | 470 | 235 |
| 6.8 (7.8) | 560 | 8x9.5 | 11 | 530 | 280 |
| 6.8 (7.8) | 680 | 8x11.5 | 10 | 580 | 340 |
| 6.8 (7.8) | 820 | 8x13.5 | 9 | 630 | 410 |
| 7 (8) | 470 | 10x7.7 | 12 | 470 | 235 |
| 7 (8) | 560 | 10x9.5 | 11 | 530 | 280 |
| 7 (8) | 680 | 10x11.5 | 10 | 580 | 340 |
| 7 (8) | 820 | 10x13.5 | 9 | 630 | 410 |
| 7.5 (8.6) | 470 | 10x7.7 | 12 | 470 | 235 |
| 7.5 (8.6) | 560 | 10x9.5 | 11 | 530 | 280 |
| 7.5 (8.6) | 680 | 10x11.5 | 10 | 580 | 340 |
| 7.5 (8.6) | 820 | 10x13.5 | 9 | 630 | 410 |
| 10 (11.5) | 470 | 10x7.7 | 12 | 470 | 235 |
| 10 (11.5) | 560 | 10x9.5 | 11 | 530 | 280 |
| 10 (11.5) | 680 | 10x11.5 | 10 | 580 | 340 |
| 10 (11.5) | 820 | 10x13.5 | 9 | 630 | 410 |
| 12 (13.8) | 470 | 10x7.7 | 12 | 470 | 235 |
| 12 (13.8) | 560 | 10x9.5 | 11 | 530 | 280 |
| 12 (13.8) | 680 | 10x11.5 | 10 | 580 | 340 |
| 12 (13.8) | 820 | 10x13.5 | 9 | 630 | 410 |
| 16 (18.4) | 220 | 6.3x7.7 | 15 | 320 | 110 |
| 16 (18.4) | 270 | 6.3x9.5 | 13 | 380 | 132 |
| 16 (18.4) | 330 | 6.3x11.5 | 12 | 430 | 165 |
| 16 (18.4) | 390 | 6.3x13.5 | 11 | 470 | 195 |
| 16 (18.4) | 470 | 6.3x16 | 10 | 530 | 235 |
| 16 (18.4) | 560 | 6.3x18.5 | 9 | 580 | 280 |
| 16 (18.4) | 680 | 6.3x22 | 8 | 630 | 340 |
| 20 (23) | 330 | 8x9.5 | 11 | 530 | 165 |
| 20 (23) | 390 | 8x11.5 | 10 | 580 | 195 |
| 20 (23) | 470 | 8x13.5 | 9 | 630 | 235 |
| 20 (23) | 560 | 8x16 | 8 | 680 | 280 |
| 20 (23) | 680 | 8x18.5 | 7 | 720 | 340 |
| 20 (23) | 820 | 8x22 | 6 | 770 | 410 |
| 25 (29) | 470 | 10x9.5 | 11 | 530 | 235 |
| 25 (29) | 560 | 10x11.5 | 10 | 580 | 280 |
| 25 (29) | 680 | 10x13.5 | 9 | 630 | 340 |
| 25 (29) | 820 | 10x16 | 8 | 680 | 410 |
| 25 (29) | 1000 | 10x18.5 | 7 | 720 | 500 |
| 25 (29) | 1200 | 10x22 | 6 | 770 | 600 |
| 35 (41) | 680 | 10x11.5 | 10 | 580 | 340 |
| 35 (41) | 820 | 10x13.5 | 9 | 630 | 410 |
| 35 (41) | 1000 | 10x16 | 8 | 680 | 500 |
| 35 (41) | 1200 | 10x18.5 | 7 | 720 | 600 |
| 35 (41) | 1500 | 10x22 | 6 | 770 | 750 |
| 50 (58) | 1000 | 12.5x16 | 8 | 680 | 500 |
| 50 (58) | 1200 | 12.5x18.5 | 7 | 720 | 600 |
| 50 (58) | 1500 | 12.5x22 | 6 | 770 | 750 |
| 50 (58) | 1800 | 12.5x25 | 5.5 | 800 | 900 |
| 63 (73) | 1200 | 12.5x18.5 | 7 | 720 | 600 |
| 63 (73) | 1500 | 12.5x22 | 6 | 770 | 750 |
| 63 (73) | 1800 | 12.5x25 | 5.5 | 800 | 900 |
| 63 (73) | 2200 | 12.5x30 | 5 | 840 | 1100 |
| 80 (92) | 1500 | 16x18.5 | 7 | 720 | 750 |
| 80 (92) | 1800 | 16x22 | 6 | 770 | 900 |
| 80 (92) | 2200 | 16x25 | 5.5 | 800 | 1100 |
| 80 (92) | 2700 | 16x30 | 5 | 840 | 1350 |
| 100 (115) | 1800 | 16x22 | 6 | 770 | 900 |
| 100 (115) | 2200 | 16x25 | 5.5 | 800 | 1100 |
| 100 (115) | 2700 | 16x30 | 5 | 840 | 1350 |
| 100 (115) | 3300 | 16x35 | 4.5 | 880 | 1650 |
| 100 (115) | 3900 | 16x41 | 4 | 920 | 1950 |
| 100 (115) | 4700 | 16x46 | 3.8 | 950 | 2350 |
| 100 (115) | 5600 | 16x51.6 | 3.5 | 1000 | 2800 |
Part Numbering System:
The part number is constructed as follows:
[Category Code][Series Code][Size Code][Capacitance Code][Capacitance Tolerance Code][Voltage Code][Terminal Code][Sleeve Marking Code]
Example: CD11GES G 100 M 100 V A 7
Part Numbering System Breakdown:
| Position | Description | Example Codes |
|---|---|---|
| Category Code | E (Electrolytic Capacitor) | |
| Series Code | GES (PZ Series) | |
| Size Code | G (16mm, L=11mm) | |
| Capacitance Code | 100 (10F) | |
| Capacitance Tolerance Code | M (20%) | |
| Voltage Code | V (100V) | |
| Terminal Code | A (Standard) | |
| Sleeve Marking Code | 7 (Standard) |
Soldering Recommendations:
- Flow Soldering (Radial Lead Type): Preheating at 13020C for 30-90 sec, Cooling at 1-3C/sec. Soldering temperature 260C for
- Reflow Soldering (Polymer SMD Type): Follow recommended reflow profile (Peak temperature T1, T2, T3, Preheating time t1, t2, t3).
- Reflow Soldering (Liquid SMD Type): Case size dependent. Temperature at surface of capacitor shall not exceed T.C. Duration over 200C and T.C. shall not exceed t and t seconds respectively. Preheat at 100C to 200C for max 180 seconds.
Lead Forming Specifications:
| Code | Figure | Lead-to-lead distance F (mm) | Lead wire diameter d (mm) | Pitch of body P (mm) | Feed hole pitch P0 (mm) | Distance from hole center to lead P1 (mm) | Distance from feed hole center to body center P2 (mm) | Height of body from tape center H (mm) | Base tape width W (mm) | Adhesive tape width WO (mm) | Hole position W1 (mm) | Hole down tape position W2 (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| B | Fig. 1 & 2 & 3 | 2.5, 3.5, 5.0 0.5 | 0.45/0.5/0.6 0.05 | 12.7 1.0 | 12.7 0.2 | 3.85-5.1 0.7 | 6.35 1.0 | 18.5 0.75 | 18.0 0.5 | 6.0-11.0 min | 9.0 +0.75/-0.5 | 3.0 max |
| P | Fig. 4 | 1.5, 2.0, 2.5, 3.5 0.5 | 0.45/0.5/0.6 0.05 | 12.7 1.0 | 12.7 0.2 | 3.85 0.7 | 6.35 1.0 | 18.5 0.75 | 18.0 0.5 | 6.0-8.0 min | 9.0 +0.75/-0.5 | 3.0 max |
| C | Lead Forming & Cut | 3.0-12.0 | - | - | - | - | - | - | - | - | - | - |
| F | Lead Forming & Cut | 3.5, 4.5, 5.0, 7.0 | - | - | - | - | - | - | - | - | - | - |
| J | Lead Forming & Cut | 4.0, 4.5, 5.0 | - | - | - | - | - | - | - | - | - | - |
Sleeve Marking Code:
| Code | Color |
|---|---|
| C | PVC |
| T | PET |
| B | Dark Blue |
| R | Bright Red |
| S | Sky-Blue |
| T | Light Blue |
| Z | Pink |
| H | Black |
| V | Purple-blue |
| D | Red |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina