Conductive Polymer Capacitor AISHI SPZ0JM122F11O00RAXXX Designed for System Board Intelligent TV and Small Charger
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
AISHi Conductive Polymer Electrolytic Capacitors - PZ Series
The AISHi PZ series conductive polymer electrolytic capacitors are designed for high-performance applications requiring low Equivalent Series Resistance (ESR) and reliable endurance. These RoHS compliant and lead-free components are ideal for system boards, display cards, small chargers, and intelligent TVs, offering a robust solution for modern electronic designs.
Product Attributes
- Brand: AISHi
- Series: PZ
- Material: Conductive Polymer
- Certifications: RoHS Compliant, Lead-free
Technical Specifications
| Item | Specification | Details |
|---|---|---|
| Category Code | E | Conductive Polymer Electrolytic Capacitor |
| Endurance | +105C 2,000 hours | |
| Low ESR | ||
| Recommended Applications | System Board, Display Card, Small Charger, Intelligent TV | |
| Temperature Range | -55C to +105C | |
| Rated Working Voltage Range | 6.3Vdc to 100Vdc | |
| Nominal Capacitance Range | 4.7F to 5600F | |
| Capacitance Tolerance | 20% (M) | |
| DC Leakage Current | 0.2CV or 500A, whichever is greater (at 20C, after 2 minutes) | Where C=Nominal Capacitance (F), V=Rated Voltage (V) |
| Dissipation Factor (tan) | See table below (at 20C, 120Hz) | |
| ESR (100kHz-300kHz, 20C) | See table below (max.) | |
| Temperature Characteristics (Impedance Ratio at 100kHz) | Z(+105C)/Z(+20C) 1.25 | |
| Z(-55C)/Z(+20C) 1.25 | ||
| Endurance Test Requirements | Capacitance Change: 20% of initial value D.F. (tan): 150% of initial specified value ESR: 150% of initial specified value Leakage Current: Initial specified value | (After 2,000 hours at 105C with rated voltage) |
| Humidity Test Requirements | Meet Endurance characteristics | (After 2,000 hours at 60C, 90%-95% RH without voltage) |
| Surge Test Requirements | Capacitance Change: 20% of initial value D.F. (tan): 150% of initial specified value ESR: 150% of initial specified value Leakage Current: Initial specified value | (After 1,000 cycles of surge voltage application) |
Standard Ratings Table (Partial)
| VDC (SV) | Cap (F) | Size DxL(mm) | ESR (m, 20C, 100kHz)(max.) | Rated ripple current (mArms/105C, 100kHz) | Leakage Current (A)(max.) |
|---|---|---|---|---|---|
| 6.3 (7.2) | 220 | 6.3x7.2 | 23 | 1110 | 4.4 |
| 6.3 (7.2) | 270 | 6.3x7.2 | 19 | 1280 | 5.4 |
| 6.3 (7.2) | 330 | 6.3x7.2 | 16 | 1430 | 6.6 |
| 6.3 (7.2) | 390 | 6.3x7.2 | 14 | 1570 | 7.8 |
| 6.3 (7.2) | 470 | 6.3x7.2 | 12 | 1700 | 9.4 |
| 6.3 (7.2) | 560 | 6.3x7.2 | 10 | 1870 | 11.2 |
| 6.3 (7.2) | 680 | 6.3x7.2 | 8.5 | 2040 | 13.6 |
| 7.5 (8.6) | 470 | 6.3x7.2 | 12 | 1700 | 9.4 |
| 7.5 (8.6) | 680 | 6.3x7.2 | 8.5 | 2040 | 13.6 |
| 7.5 (8.6) | 820 | 8x9.5 | 7.2 | 2300 | 16.4 |
| 10 (11.5) | 470 | 6.3x7.2 | 12 | 1700 | 9.4 |
| 10 (11.5) | 680 | 6.3x7.2 | 8.5 | 2040 | 13.6 |
| 10 (11.5) | 820 | 8x9.5 | 7.2 | 2300 | 16.4 |
| 10 (11.5) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 12 (13.8) | 470 | 6.3x7.2 | 12 | 1700 | 9.4 |
| 12 (13.8) | 680 | 6.3x7.2 | 8.5 | 2040 | 13.6 |
| 12 (13.8) | 820 | 8x9.5 | 7.2 | 2300 | 16.4 |
| 12 (13.8) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 12 (13.8) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 16 (18.4) | 470 | 6.3x7.2 | 12 | 1700 | 9.4 |
| 16 (18.4) | 680 | 6.3x7.2 | 8.5 | 2040 | 13.6 |
| 16 (18.4) | 820 | 8x9.5 | 7.2 | 2300 | 16.4 |
| 16 (18.4) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 16 (18.4) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 16 (18.4) | 1500 | 10x12 | 4.0 | 3000 | 30.0 |
| 16 (18.4) | 1800 | 10x12 | 3.5 | 3200 | 36.0 |
| 20 (23) | 680 | 6.3x7.2 | 8.5 | 2040 | 13.6 |
| 20 (23) | 820 | 8x9.5 | 7.2 | 2300 | 16.4 |
| 20 (23) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 20 (23) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 20 (23) | 1500 | 10x12 | 4.0 | 3000 | 30.0 |
| 20 (23) | 1800 | 10x12 | 3.5 | 3200 | 36.0 |
| 20 (23) | 2200 | 12.5x13.8 | 3.0 | 3500 | 44.0 |
| 25 (29) | 680 | 6.3x7.2 | 8.5 | 2040 | 13.6 |
| 25 (29) | 820 | 8x9.5 | 7.2 | 2300 | 16.4 |
| 25 (29) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 25 (29) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 25 (29) | 1500 | 10x12 | 4.0 | 3000 | 30.0 |
| 25 (29) | 1800 | 10x12 | 3.5 | 3200 | 36.0 |
| 25 (29) | 2200 | 12.5x13.8 | 3.0 | 3500 | 44.0 |
| 25 (29) | 2700 | 12.5x13.8 | 2.5 | 3700 | 54.0 |
| 35 (41) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 35 (41) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 35 (41) | 1500 | 10x12 | 4.0 | 3000 | 30.0 |
| 35 (41) | 1800 | 10x12 | 3.5 | 3200 | 36.0 |
| 35 (41) | 2200 | 12.5x13.8 | 3.0 | 3500 | 44.0 |
| 35 (41) | 2700 | 12.5x13.8 | 2.5 | 3700 | 54.0 |
| 35 (41) | 3300 | 12.5x13.8 | 2.2 | 3900 | 66.0 |
| 35 (41) | 3900 | 16x18.4 | 2.0 | 4200 | 78.0 |
| 50 (58) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 50 (58) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 50 (58) | 1500 | 10x12 | 4.0 | 3000 | 30.0 |
| 50 (58) | 1800 | 10x12 | 3.5 | 3200 | 36.0 |
| 50 (58) | 2200 | 12.5x13.8 | 3.0 | 3500 | 44.0 |
| 50 (58) | 2700 | 12.5x13.8 | 2.5 | 3700 | 54.0 |
| 50 (58) | 3300 | 12.5x13.8 | 2.2 | 3900 | 66.0 |
| 50 (58) | 3900 | 16x18.4 | 2.0 | 4200 | 78.0 |
| 50 (58) | 4700 | 16x18.4 | 1.8 | 4500 | 94.0 |
| 50 (58) | 5600 | 18x20 | 1.6 | 4800 | 112.0 |
| 63 (73) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 63 (73) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 63 (73) | 1500 | 10x12 | 4.0 | 3000 | 30.0 |
| 63 (73) | 1800 | 10x12 | 3.5 | 3200 | 36.0 |
| 63 (73) | 2200 | 12.5x13.8 | 3.0 | 3500 | 44.0 |
| 63 (73) | 2700 | 12.5x13.8 | 2.5 | 3700 | 54.0 |
| 63 (73) | 3300 | 12.5x13.8 | 2.2 | 3900 | 66.0 |
| 63 (73) | 3900 | 16x18.4 | 2.0 | 4200 | 78.0 |
| 63 (73) | 4700 | 16x18.4 | 1.8 | 4500 | 94.0 |
| 63 (73) | 5600 | 18x20 | 1.6 | 4800 | 112.0 |
| 80 (92) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 80 (92) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 80 (92) | 1500 | 10x12 | 4.0 | 3000 | 30.0 |
| 80 (92) | 1800 | 10x12 | 3.5 | 3200 | 36.0 |
| 80 (92) | 2200 | 12.5x13.8 | 3.0 | 3500 | 44.0 |
| 80 (92) | 2700 | 12.5x13.8 | 2.5 | 3700 | 54.0 |
| 80 (92) | 3300 | 12.5x13.8 | 2.2 | 3900 | 66.0 |
| 80 (92) | 3900 | 16x18.4 | 2.0 | 4200 | 78.0 |
| 80 (92) | 4700 | 16x18.4 | 1.8 | 4500 | 94.0 |
| 100 (115) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 100 (115) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 100 (115) | 1500 | 10x12 | 4.0 | 3000 | 30.0 |
| 100 (115) | 1800 | 10x12 | 3.5 | 3200 | 36.0 |
| 100 (115) | 2200 | 12.5x13.8 | 3.0 | 3500 | 44.0 |
| 100 (115) | 2700 | 12.5x13.8 | 2.5 | 3700 | 54.0 |
| 100 (115) | 3300 | 12.5x13.8 | 2.2 | 3900 | 66.0 |
| 100 (115) | 3900 | 16x18.4 | 2.0 | 4200 | 78.0 |
| 100 (115) | 4700 | 16x18.4 | 1.8 | 4500 | 94.0 |
Part Numbering System
The part numbering system follows the format: Category Code - Series Code - Size Code - Capacitance Code - Capacitance Tolerance Code - Voltage Code - Terminal Code - Sleeve Marking Code
| Position | Code | Description |
|---|---|---|
| 1 | E | Electrolytic Capacitor |
| 2 | G | Conductive Polymer |
| 3 | CD11GE, CD11GES, CD11GAS, CD11GHS | Series Name |
| 4 | (See table) | Size Code (Diameter x Length in mm) |
| 5 | (See table) | Capacitance Code (F) |
| 6 | (See table) | Capacitance Tolerance Code (%) |
| 7 | (See table) | Voltage Code (Vdc) |
| 8 | (See table) | Terminal Code |
| 9 | (See table) | Sleeve Marking Code |
Soldering Recommendations
Flow Soldering (Radial Lead Type)
- Preheating: 130 20C, 30-90 sec.
- Cooling: (1-3 C)/sec. (Note 1)
- Soldering Temperature: Approx. 260C,
- Note 1: Cooling rate.
Reflow Soldering (Polymer SMD Type)
- Recommended Reflow Profile: See diagram.
- Preheating: 150C to 180C, Within 90 sec.
- Peak Temperature (T1): Max 260C (for case size
- Time above 200C (t1): Max 40 sec. (for case size C6.3), Max 30 sec. (for case size C8, 10)
- Time above T.C (t): Max 90 sec.
Reflow Soldering (Liquid SMD Type)
- Case size: 6.3 - 10mm:
Preheat: 100C to 200C, Max 180 seconds.
Peak Temperature (T.): Max 230C.
Duration over 200C (t): Max 90 sec.
Duration over T.C (t,): Max 40 sec. - Case size: 12.5 - 18mm:
Preheat: 100C to 180C, Max 150 seconds.
Peak Temperature (T.): Max 230C.
Duration over 200C (t): Max 60 sec.
Duration over T.C (t,): Max 30 sec.
Lead Forming and Taping Specifications
Various lead forming and taping options are available, including standard taping, lead cut, lead forming & cut, and kink options, with specific dimensions and configurations detailed in the provided figures and tables.
Dimensions (mm)
| Item | Symbol | Specification |
|---|---|---|
| Lead Forming & Cut | Code: C | Range: 4-18 |
| Code: F | Range: 4-18, L: 3.5, 4.5, 5.0, 7.0mm | |
| Lead Forming & Cut | Code: J | Range: 10-18, L: 4.0, 4.5, 5.0mm |
Specifications are subject to change without notice.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina