Long Life Conductive Polymer Capacitor AISHI SPZ0JM102F09C30R with Wide Operating Temperature Range
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The AiSHi PZ series conductive polymer aluminum electrolytic capacitors are designed for high-performance applications requiring low ESR and extended endurance. These RoHS compliant and lead-free components are suitable for system boards, display cards, small chargers, and intelligent TVs. They offer reliable operation with a wide temperature range and various voltage and capacitance ratings.
Product Attributes
- Brand: AiSHi
- Series: PZ
- Type: Conductive Polymer Aluminum Electrolytic Capacitor
- Certifications: RoHS Compliant, Lead-free
- Sleeve Marking: PVC (Dark Blue), PET (Bright Red, Sky-Blue, Light Blue, Pink, Black, Purple-blue, Red)
Technical Specifications
| Item | Specification | Details |
|---|---|---|
| Category Code | E | Electrolytic Capacitor |
| Type Code | E | Conductive Polymer |
| Series Code | PZ | PZ Series |
| Temperature Range | -55 to +105C | |
| Rated Working Voltage Range | 6.3 to 100Vdc | |
| Nominal Capacitance Range | 4.7 to 5600F | |
| Capacitance Tolerance | 20% (M) | |
| DC Leakage Current | 0.2CV or 500A, whichever is greater (at 20C, 120Hz) | (after 2 minutes) |
| Dissipation Factor (tan) | See table for values (at 20C, 120Hz) | Max values: 0.08 (6.3V), 0.12 (10V), 0.15 (16V) |
| ESR | See table for values (100 to 300kHz, 20C) | |
| Temperature Characteristics (Impedance Ratio) | Z(+105C)/Z(+20C) 1.25 | (at 100kHz) |
| Z(-55C)/Z(+20C) 1.25 | (at 100kHz) | |
| Endurance | 2,000 hours at +105C | Capacitance Change 20%, D.F. 150% of initial, ESR 150% of initial, Leakage Current initial specified value |
| Humidity Test | 2,000 hours at 60C (90%-95% RH, no voltage) | Meets Endurance characteristics |
| Surge Test | 1,000 cycles (charge/discharge) | Meets Endurance characteristics |
| Recommended Applications | System Board, Display Card, Small Charger, Intelligent TV | |
| Soldering - Flow (Radial Lead) | Preheating: 13020C (30-90 sec), Cooling: | |
| Soldering - Reflow (Polymer SMD) | Profile: T1 (Peak Temp), T2 (Temp. over 200C), T3 (Temp. over Tc), t1, t2, t3 | Specific values depend on case size. |
| Soldering - Reflow (Liquid SMD) | Case size | Tc and t, values vary by case size. |
Dimensions
| Size Code | Diameter (D) | Length (L) | ESR (m, max) | Ripple Current (mArms, max) | Leakage Current (A, max) |
|---|---|---|---|---|---|
| 4C | 4 | 5.4 | 180 | 110 | 5 |
| 5D | 5 | 5.4 | 130 | 140 | 7 |
| 6.3E | 6.3 | 7.3 | 80 | 200 | 10 |
| 8F | 8 | 9.5 | 60 | 260 | 12 |
| 10G | 10 | 12.5 | 45 | 350 | 15 |
| 12J | 12.5 | 12.5 | 38 | 400 | 18 |
| 16L | 16 | 18.4 | 30 | 500 | 20 |
| 18M | 18 | 18.4 | 28 | 550 | 22 |
| 20N | 20 | 23 | 25 | 600 | 25 |
| 25P | 25 | 29 | 20 | 700 | 30 |
| 35Q | 35 | 41 | 18 | 800 | 35 |
| 40R | 40 | 41 | 16 | 850 | 40 |
| 50S | 50 | 58 | 14 | 950 | 45 |
| 63T | 63 | 73 | 12 | 1100 | 50 |
| 80U | 80 | 92 | 10 | 1200 | 55 |
| 100V | 100 | 115 | 8 | 1300 | 60 |
Part Numbering System
The part number is structured as follows:
Category Code - Series Code - Size Code - Capacitance Code - Capacitance Tolerance Code - Voltage Code - Terminal Code - Sleeve Marking Code
Example: CD11GES G 475 J 100 V A B
| Code | Description |
|---|---|
| Category Code | E (Electrolytic Capacitor) |
| Series Code | PZ (PZ Series) |
| Size Code | See table for codes and dimensions (e.g., 4C, 5D, 6.3E) |
| Capacitance Code | e.g., 475 = 4.7F, 562 = 5600F |
| Capacitance Tolerance Code | M (20%) |
| Voltage Code | e.g., 100 (100Vdc) |
| Terminal Code | A (Standard), B (Taping), C (Lead Forming & Cut), F (Lead Forming & Cut), J (Kink & Cut) |
| Sleeve Marking Code | See list for colors (e.g., B, R, S, L, T, H, V, K) |
Lead Forming & Taping Specifications
| Figure | Code | Description | Lead Wire Diameter (d) | Pitch of Body (P) | Feed Hole Pitch (PO) | Distance from hole center to lead (P1) | Distance from feed hole center to body center (P2) | Lead-to-lead distance (F) | Height of body from tape center (H) | Base tape width (W) | Adhesive tape width (WO) | Hole position (W1) | Hole down tape position (W2) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fig.1 | B | Taping (SMD Type) F=5.0mm | 0.45-0.6 | 12.7 1.0 | 12.7 0.2 | 3.85 0.7 | 6.35 1.0 | 2.5-5.0 0.5 | 18.5 0.75 | 18.0 0.5 | 6.0-11.0 min | 9.0 +0.75/-0.5 | 3.0 max |
| Fig.2 | B | Taping (SMD Type) F=5.0mm | 0.45-0.6 | 12.7 1.0 | 12.7 0.2 | 3.85 0.7 | 6.35 1.0 | 2.5-5.0 0.5 | 18.5 0.75 | 18.0 0.5 | 6.0-11.0 min | 9.0 +0.75/-0.5 | 3.0 max |
| Fig.3 | B | Taping (SMD Type) F=5.0mm | 0.45-0.6 | 12.7 1.0 | 12.7 0.2 | 3.85 0.7 | 6.35 1.0 | 2.5-5.0 0.5 | 18.5 0.75 | 18.0 0.5 | 6.0-11.0 min | 9.0 +0.75/-0.5 | 3.0 max |
| Fig.4 | P | Taping F=5.0mm | 0.45-0.6 | 12.7 1.0 | 12.7 0.2 | 3.85 0.7 | 6.35 1.0 | 1.5-3.5 0.5 | 18.5 0.75 | 18.0 0.5 | 6.0-8.0 min | 9.0 +0.75/-0.5 | 3.0 max |
| Code:C | Lead Forming & Cut | L=3.0-12.0mm | |||||||||||
| Code:F | Lead Forming & Cut | L=3.5, 4.5, 5.0, 7.0mm | |||||||||||
| Code:J | Kink & Cut | L=4.0, 4.5, 5.0mm |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina