Miniature Aluminum Electrolytic Capacitors AISHI ERS1HM470D12P25T Rated Voltage 6.3 to 120 Volts DC
Product Overview
This specification covers the RS series miniature single-ended aluminum electrolytic capacitors. These capacitors are designed for reliable long-term operation within a wide temperature range of -40C to +105C and voltage ratings from 6.3V.DC to 120V.DC. They are manufactured in accordance with JIS-C-5101-1 and JIS-C-5101-4 standards, offering stable electrical and mechanical characteristics suitable for various industrial applications. The RS series capacitors are built with an aluminum case and feature a violet sleeve with white markings for clear identification.
Product Attributes
- Brand: AISHI
- Series: RS
- Type: Miniature Single-Ended Aluminum Electrolytic Capacitors
- Sleeve Color: Violet
- Marking Color: White
- Compliance: RoHS
Technical Specifications
| Category | Item | Specification / Value | Test Method / Condition |
|---|---|---|---|
| General | Operating Temperature Range | -40C ~ +105C | At rated voltage |
| Rated Voltage Range | 6.3V.DC ~ 120V.DC | DC voltage + peak ripple voltage Rated voltage | |
| Applicable Standards | JIS-C-5101-1, JIS-C-5101-4 | Consulted | |
| Electrical Characteristics | Capacitance Tolerance | -20% ~ +20% | 120Hz (20%), 0.5Vrms or less + 1.5 to 2.0 VDC |
| Leakage Current (after 2 min) | I 0.01CV or 3A (Whichever is greater) for 6.3V~120V | Rated voltage applied with 1000100 series resistor | |
| Temperature Characteristic | Impedance ratio to 20C value within specified limits at -25C and -40C. Capacitance variation within 20% of initial value. | Tested at various temperatures (-40C, 20C, 105C) | |
| Surge Test | Capacitance change within 20% of initial value. Dissipation factor 200% of TABLE-1. Leakage current to satisfy 5.1.4. | 1000 cycles of 305 sec. charge, 5.50.5 min. discharge at 15C-35C. | |
| Load Life Test | Capacitance change within 20% (30% for 6.3V, 10V). Dissipation factor 200% of specified value. Leakage current specified value. | 1052C, applied rated voltage and ripple current for specified hours (4000-10000 hrs depending on case diameter). | |
| Mechanical Characteristics | Terminal Strength (Tensile) | Varies by lead wire diameter (e.g., 5N for 0.45mm, 10N for 0.5mm, 20N for 0.6mm/0.8mm/1.0mm) | Applied for 101 sec. |
| Terminal Strength (Bending) | Varies by lead wire diameter (e.g., 2.5N for 0.45mm, 5N for 0.5mm, 10N for 0.6mm/0.8mm/1.0mm) | 90 bend, return, opposite 90 bend, return, within 5 sec. | |
| Resistance to Vibration | No intermittent contacts, open/short circuits, or visible mechanical damage. | 10-55Hz, 1.5mm peak-to-peak amplitude, 2h per axis (3 axes). | |
| Marking | Manufacturer's name/trademark, Series (RS 105C), Date code, Customer P/N (if applicable), Voltage/Capacity, Negative polarity mark. | Indelibly marked on capacitor body. | |
| Dimensions | Refer to Section 8.1 DIMENSIONS (mm) and Section 9 LEAD FORMING TYPE for detailed case sizes and lead forming dimensions. | ||
| Standard Ratings | Refer to Section 8.3 STANDARD RATINGS for detailed WV, Capacitance, Case Size, tan, Impedance, and Rated ripple current. | ||
Note: Detailed specifications for dissipation factor, impedance ratio, surge voltage, ripple current frequency coefficient, and ripple current temperature coefficient are provided in Section 8.2.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.