BOCHEN PT06-K-V-204200K General Grade Carbon Potentiometer for Electronic Circuit Voltage Adjustment
Product Overview
The PT06-K-V is a general-purpose carbon-based potentiometer designed for voltage adjustment applications. It features a standard resistance taper and is suitable for use in various electronic circuits.
Product Attributes
- Product Name: PT06-K-V
- Product Type: General grade carbon element potentiometer (single turn)
- Product Code: PT06-K-V
- Document Number: RVPT06-03
- Version Number: 0/0
- Page: 1/1
Technical Specifications
| Item | Specification | Unit |
|---|---|---|
| 1 ELECTRICAL CHARACTERISTICS | ||
| Total Resistance | __ | K |
| Total Resistance Tolerance | 20% | |
| Resistance Taper | Linear (B) / Other Linear | |
| Power Rating | 0.1W (Linear B) / 0.05W (Other Linear) | |
| Max. operating Voltage | 100V DC (Linear B) / 50V DC (Other Linear) | |
| Residual Resistance | 10 (R1-2), 10 (R2-3) | |
| Insulation Resistance | 100 M | at DC 100 V |
| Effective stroke of resistance | 215 5 | |
| Rotational Noise | 100 mV | |
| Withstanding Voltage | 100 V | at DC 1 Minute |
| 2 MECHANICAL CHARACTERISTICS | ||
| Dimensions | Refer to the separate product chart | |
| Total Rotational Angle | 235 10 | |
| Rotational Torque | 10 ~ 150 | gf.cm |
| Shaft Stop Strength | 0.5kgf.cm min | |
| 3 DURABILITY CHARACTERISTICS | ||
| Rotational Life | 10,000 cycles | |
| Working Temperature | -25 ~ + 70 | |
| Storage Temperature | -25 ~ + 80 | |
| Soldering Heat Characteristic | Auto Soldering: 2605 / 31 sec; Manual Soldering: 2805 / 31 sec | |
Resistance Code Table
| TOTAL RESISTANCE VALUE | MARKING | TOTAL RESISTANCE VALUE | MARKING |
|---|---|---|---|
| 100 | 101 | 20K | 203 |
| 200 | 201 | 22K | 223 |
| 300 | 301 | 30K | 303 |
| 500 | 501 | 47K | 473 |
| 1K | 102 | 50K | 503 |
| 2K | 202 | 100K | 104 |
| 3K | 302 | 200K | 204 |
| 5K | 502 | 250K | 254 |
| 10K | 103 | 300K | 304 |
| 500K | 504 | 1M | 105 |
| 2M | 205 |
Precautions
Use of chemicals: Avoid contact with ammonia, amines, alkali solutions, aromatic hydrocarbons, ketones, esters, and halogenated hydrocarbons, as these can affect the polycarbonate resin used.
Use of flux: Avoid water-soluble flux during soldering, as it can adversely affect the molding material and metal components.
Soldering: Prevent solder from flowing onto the upper surface of the PC board to avoid poor contact.
Recommended circuit configuration: Recommended for voltage adjustment. If used for current adjustment, confirm performance under actual operating conditions due to potential influence from contact resistance.
Residual Resistance: Standard products have a sulfurization-resistant film over silver electrodes. Contact for low residual resistance requirements.
Dew condensation: Avoid use in conditions where dew or water drops may form on the resistor surface to prevent insulation deterioration or short circuits.
Low Temperature Operation: Customized products with smoother rotary movement are available for low-temperature environments upon request.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.