Single turn general grade carbon potentiometer BOCHEN PT06-M-V-204200K for electronic applications
Product Overview
This document details the specifications for the PT06-M-V potentiometer, a general-grade carbon element potentiometer designed for various electronic applications. It offers precise resistance control with options for different resistance tapers and power ratings.
Product Attributes
- Product Name: PT06-M-V
- Product Type: General Grade Carbon Element Potentiometer (Single Turn)
- Document Number: RVPT06-01
- Version Number: 0/0
- Page: 1/1
- Description: Potentiometer
Technical Specifications
| Item | Specification | Unit | Details |
| ELECTRICAL CHARACTERISTICS | |||
| Total Resistance | __ | K | |
| Total Resistance Tolerance | 20% | ||
| Resistance Taper | Linear (B) | Other Linear | |
| Power Rating | 0.1W | 0.05W | |
| Max. operating Voltage | 100V DC | 50V DC | |
| Residual Resistance | 10 | R1-2 ; R2-3 | |
| Insulation Resistance | 100 | M | at DC 100 V |
| Effective stroke of resistance | 215 5 | ||
| Rotational Noise | 100 | mV | |
| Withstanding Voltage | 100 | V DC | 1 Minute |
| MECHANICAL CHARACTERISTICS | |||
| Dimensions | Refer to the separate product chart | () | |
| Total Rotational Angle | 235 10 | ||
| Rotational Torque | 10 ~ 150 | gf.cm | |
| Shaft Stop Strength | 0.5 | kgf.cm min | |
| DURABILITY CHARACTERISTICS | |||
| Rotational Life | 10,000 | cycles | Resistance change within 15%, Rotational Noise : 150mV |
| Working Temperature | -25 ~ +70 | ||
| Storage Temperature | -25 ~ +80 |
ABBREVIATION OF NOMINAL TOTAL RESISTANCE
| TOTAL RESISTANCE VALUE | MARKING | TOTAL RESISTANCE VALUE | MARKING |
| 100 | 101 | 20K | 203 |
| 200 | 201 | 22K | 223 |
| 300 | 301 | 30K | 303 |
| 500 | 501 | 47K | 473 |
| 1K | 102 | 50K | 503 |
| 2K | 202 | 100K | 104 |
| 3K | 302 | 200K | 204 |
| 5K | 502 | 250K | 254 |
| 10K | 103 | 300K | 304 |
| 500K | 504 | ||
| 1M | 105 | ||
| 2M | 205 |
PRECAUTIONS
Use of chemicals: Avoid contact with ammonia, amines, alkali solutions, aromatic hydrocarbons, ketones, esters, and halogenated hydrocarbons as polycarbonate resins are used.
Use of flux: Avoid using water-soluble flux during soldering to prevent adverse effects on materials.
Soldering: Avoid wiring designs and soldering methods where molten solder flows onto the upper surface of the PC board to prevent imperfect contacts.
Recommended circuit configuration: Recommended for voltage adjustment. If used for current adjustment, confirm under actual operating conditions due to potential influence from contact resistance.
Residual Resistance: Silver printing is used for electrode parts with a sulfurization-proof film. Contact us for low residual resistance requirements.
Dew condensation: Avoid use in conditions where dew or water drops may occur on the resistor surface to prevent insulation degradation or short circuits.
Operation at Low Temperature: For low-temperature environments (e.g., car audio), customized products with comfortable tactile feel can be provided upon request. Please specify when ordering.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.