Chip Multilayer Ceramic Capacitors 3 Terminals Low ESL muRata NFM18CC221R1C3D for Electronic Devices

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

3 Terminals Low ESL Chip Multilayer Ceramic Capacitors (EMIFIL)

These 3 Terminals Low ESL Chip Multilayer Ceramic Capacitors (EMIFIL) are designed for general electronic equipment, offering low Equivalent Series Inductance (ESL) for enhanced performance. They are suitable for a wide range of general-purpose applications.

Product Attributes

Brand: MURATA
Part Number System: NFM18CC221R1C3
Packaging: 180mm Reel, PAPER W8P4, 4000 pcs./Reel

Technical Specifications

Item	Specification	Test Method
Nominal Capacitance	220 pF	Frequency (Cap.): 10.1kHz, Voltage: 10.2V(rms)
Capacitance Tolerance	20 %
DC Rated Voltage	DC 16 V
DC Resistance	1000Mmin.	Measured with 100mA max.
Rated Current	500mA(DC)
DC Resistance	300mmax.
Operating /Storage Temp. Range	-55 to 125 C
Insulation Resistance(I.R.)	JEMCPS-02209D
Appearance	No defects or abnormalities.	Visual inspection.
Dimensions	Within the specified dimensions.	Using Measuring instrument of dimension.
Solderability	Electrodes shall be at least 90% covered with new solder coating.	Flux: Solution of rosin ethanol 25(mass)%, Pre-heat: 15010C, 60 to 90s, Solder: Sn-3.0Ag-0.5Cu, Solder Temperature: 2403C, Immersion Time: 31s
Resistance to soldering heat	Products shall be no failure after tested.	Flux: Solution of rosin ethanol 25(mass)%, Pre-heat: 15010C, 60 to 90s, Solder: Sn-3.0Ag-0.5Cu, Solder Temperature: 2705C, Immersion Time: 101s
Bending Strength	Meet Table 2.	Soldered on glass-epoxy substrate(t=1.0mm), Deflection: 2mm, Keeping Time: 30s
Drop	It shall be dropped on concrete or steel board.	Free fall, Height: 1m, Attitude: 3 directions
Bonding Strength	It shall be soldered on the glass-epoxy substrate.	Applying Force (F): 9.8N, Applying Time: 30s
Vibration	Meet Table 3.	Soldered on glass-epoxy substrate, Oscillation Frequency: 10 to 2000 to 10Hz for 20 minutes. Total amplitude 1.5 mm or Acceleration amplitude 196m/s2 whichever is smaller. Time: 2 hours in each of 3 mutually perpendicular directions.
Temperature Cycling	Meet Table 1.	1 Cycle: -55+0/-3 / 30+3/-0 min, Room Temperature / within 3 min, +125+3/-0 / 30+3/-0 min, Room Temperature / within 3 min. Total of 10 cycles.
Humidity	Meet Table 4.	Temperature: 402C, Humidity: 90 to 95%(RH), Time: 500+24/-0 hours
Heat Life		Temperature: 1252C, Test Voltage: Rated Voltage x 200%, Charge Current: 50mA max., Time: 1000+48/-0 hours
Cold Resistance		Temperature: -552C, Time: 500+24/-0 hours
Taping Specification	Missing components number within 0.1% of the number per reel or 1 pc., whichever is greater, and are not continuous.
Pull Strength of Top Tape	5Nmin.
Peeling off force of top tape	0.1N to 0.6N	Speed of Peeling off: 300 mm / min