Industrial Grade Surface Mount Standard Tantalum Capacitors Xiangyee CA45C025K226TA MnO Electrolyte RoHS Compliant
Product Overview
The NextGen Components CA45 Series SMD Standard Tantalum Capacitors are industrial-grade, MnO-based capacitors designed for surface mount applications. These components offer a wide operating temperature range of -55C to +125C, small volume with high stability, and good frequency characteristics. They are suitable for various consumer electronic equipment, including color TV sets, PCs, mobile telephones, pickup cameras, and radar systems. The capacitors are RoHS/RoHS III compliant and available in Tape/Reel packaging.
Product Attributes
- Brand: NextGen Components, Inc.
- Series: CA45 Series
- Capacitor Type: Standard Tantalum Capacitors
- Electrolyte: MnO
- Grade: Industrial Grade
- Mounting Type: Surface Mount (SMD)
- Compliance: RoHS / RoHS III Compliant
- Packaging: Tape/Reel (500pcs/Reel)
- Original Part Number: CA45-C025K226T
- Part Code: CA45C025K226TA
Technical Specifications
| Specification | Value | Unit | Condition | |
|---|---|---|---|---|
| Series Code | CA45 | |||
| Case Size Code | C | |||
| EIA Code | 6032-28 | |||
| Dimensions (L*W*H) | 6.20*3.30*2.60 | mm | ||
| Rated Voltage | 25 | Vdc | - | |
| Capacitance | 22 | F | @25, 100Hz | |
| Capacitance Tolerance | 10% | - | @25, 100Hz | |
| ESR (Equivalent Series Resistance) | 1.5 | Max. | @25, 100KHz | |
| Operating Temperature Range | -55 ~ +125 | C | ||
| Dissipation Factor (tg) | 6.0 | % Max. | - | |
| Leakage Current (I) | 0.01 CRUR or 5.5A Max. (whichever is greater) | A | Measured after 5 Minutes Application of rated voltage @25 | |
| Power Dissipation (Max) | 90 | mW | @+25C (Case C) | |
| Marking | E226 (E=25V, 22F) | - | ||
Application Notes
Storage Condition: Environmental temperature 10C+30C, Relative humidity no more than 60%, Storing period no more than one and half year.
Ripple Current and Voltage: Power Dissipated (P) = I ESR. Ripple current (I) calculation is dependent on temperature and frequency derating factors. Ripple voltage is limited by power dissipation, DC voltage rating, and permissible reverse voltage ratings.
Reverse Voltage: Solid tantalum capacitors are polarized. Transient reverse voltage is permissible for short periods: 10% of Max. rated voltage or 1V (whichever is smaller) at 25C; 5% or 0.5V at 85C; 1% or 0.1V at 125C. Continuous use in reverse voltage mode is not allowed.
Working Voltage: For general applications, use 50% of rated voltage or less. For power, low impedance, coupling, or switching circuits with leakage current issues, use voltage under 30% of working voltage (max 50%). Derate voltage when temperature is above 85C.
Protective Resistance: In circuits with instantaneous current (switching, charge/discharge), a series resistance of at least 3/V is recommended. In low impedance circuits, applied voltage should be half or one third of the rated voltage.
Redundancy: MnO tantalum capacitors can heat up and potentially cause fire in short circuit conditions. Design for reliability.
Test Condition: Ambient Temperature 25C; Relative Humidity 60 to 70%; Air Pressure 800 to 1060mbar. Ensure product is fully discharged before testing or use. Reverse polarity is strictly prohibited.
Soldering: Suitable for reflow soldering (reflow temperature 250C, 5 seconds). Manual welding requires specific conditions (25W soldering iron,
Recommended Soldering Profile Conditions: Refer to IPC/J-STD-020D standard for convection and IR reflow profiles.
Recommended Voltage Derating Guidelines: Max. Application Voltage is 50% of VR for VR 10V and 30% of VR for VR 16V within the -55C ~ 85C range.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.