Precision through hole potentiometer Amphenol PT15RV02-503A2020-PM-S with shaftless design and ip54 protection
Product Overview
The Piher PT-15 and PTC-15 are 15-mm through-hole potentiometers designed for applications requiring frequent adjustment. Featuring a shaftless design, they accommodate various engagement mechanisms like custom shafts, motor controls, or human interfaces. These potentiometers offer precise control for variable outputs such as frequency, motor speed, or volume. Key benefits include excellent linearity (up to 3%), a choice of carbon or cermet resistive elements, up to 38 mechanical detents for tactile feedback, and an extended life cycle of up to 100,000 cycles. They also boast IP54 protection and are available in magazine packaging for automated insertion. Applications span appliance program selection, thermostat adjustment, timer and control relays, consumer electronics, power tool controls, and test and measurement equipment.
Product Attributes
- Brand: Piher
- Product Series: PT-15, PTC-15
- Type: Through-hole potentiometer
- Resistive Element: Carbon or Cermet
- Substrate: Polyester / Alumina
- Flammability: Self-extinguishable plastic (UL 94V-0) available; PTC-15 is non-flammable by standard.
- Protection: IP54
- Packaging: Magazine packaging available for automatic insertion
- Certifications: ISO 14001
Technical Specifications
| Specification | PT-15 | PTC-15 |
|---|---|---|
| Taper | Lin, Log, Alog | Lin, Log, Alog |
| Range of values | Lin: 100 Rn 5M Log, Alog: 1K Rn 5M | Lin: 100 Rn 5M Log, Alog: 1K Rn 5M |
| Tolerance | 20% (100 Rn 1M) 30% (1M < Rn 5M) | 20% (100 Rn 1M) 30% (1M < Rn 5M) |
| Max. Voltage | 250 VDC (Lin) 125 VDC (Log, Alog) | 250 VDC (Lin) 125 VDC (Log, Alog) |
| Nominal power @ 50C | 0.25 W (Lin) 0.12 W (Log, Alog) | 0.25 W (Lin) 0.12 W (Log, Alog) |
| Nominal power @ 70C | 0.50 W (Lin) 0.25 W (Log, Alog) | 0.50 W (Lin) 0.25 W (Log, Alog) |
| Residual resistance | 0.5% Rn (5 min.) | 0.5% Rn (5 min.) |
| Equivalent noise resistance | 3% Rn (3 min.) | 3% Rn (3 min.) |
| Operating temperature | -25C to +70C | -40C to +90C |
| Mechanical rotation angle | 265 5 | 265 5 |
| Electrical rotation angle | 240 20 | 240 20 |
| Torque | 0.5 to 2.5 Ncm (0.7 to 3.4 in-oz) | 0.5 to 2.5 Ncm (0.7 to 3.4 in-oz) |
| Rotational Stop | > 10 Ncm (>14 in-oz) | > 10 Ncm (>14 in-oz) |
| Life Cycles | Up to 100,000 | Up to 10,000 |
| Detents | Up to 38 | Up to 38 |
| Wiper position | Initial, 50%, or fully clockwise | Initial, 50%, or fully clockwise |
| Switch option | SPDT available | SPDT available |
| Low torque version | Available | Available |
| Environmental Testing (Typical R(%)) - Electrical Life (1000h) | 5% (at 50C, 0.15W) | n/a |
| Environmental Testing (Typical R(%)) - Electrical Life (1000h) | n/a | 2% (at 70C, 0.33W) |
| Environmental Testing (Typical R(%)) - Mechanical Life (1000 cycles) | 3% (Rn < 1M) | 2% |
| Environmental Testing (Typical R(%)) - Temperature Coefficient | 300 ppm/C (Rn < 100K) | n/a |
| Environmental Testing (Typical R(%)) - Temperature Coefficient | n/a | 100 ppm/C (Rn < 100K) |
| Environmental Testing (Typical R(%)) - Thermal Cycling | 2.5% | n/a |
| Environmental Testing (Typical R(%)) - Thermal Cycling | n/a | 2% |
| Environmental Testing (Typical R(%)) - Damp Heat (500h @ 40C, 95% RH) | 5% | 2% |
| Environmental Testing (Typical R(%)) - Vibration (2h each plane @ 10Hz - 55Hz) | 2% | 2% |
| Environmental Testing (Typical R(%)) - Storage (6 months @ 23C 2C, 50% RH) | 2.5% | 2% |
| Standard Configuration Life | 1,000 cycles | n/a |
| Standard Configuration Cut track | No | n/a |
| Standard Configuration Detents | None | None |
| Standard Configuration Packaging | Bulk | Bulk |
| Standard Configuration Shaft/thumb wheel | None | None |
| Standard Configuration Non-flammability | No | Yes |
| Standard Configuration Housing color | Black | Cream |
| Standard Configuration Rotor color | White | Cream |
| Standard Configuration Wiper Position | Initial | Initial |
| Standard Configuration Torque | 0.5 to 2.5 Ncm | 0.5 to 2.5 Ncm |
| Standard Configuration Terminal material | Steel | Brass |
| Standard Configuration Linearity | Not controlled | Not controlled |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.