Miniature Aluminum Electrolytic Capacitors BERYL Electronic Tech RC035M220LO5*11TH-2A1E for Power Supply Performance
Product Overview
The RC Series Miniature Aluminum Electrolytic Capacitors are designed for low impedance and high ripple current applications, making them ideal for switching power supplies. These capacitors are RoHS2.0 compliant.
Product Attributes
- Series: RC Series
- Type: Miniature Aluminum Electrolytic Capacitors
- Compliance: RoHS2.0 Compliant
Technical Specifications
| Category | Specification | Details |
|---|---|---|
| Category Temperature Range | Operating Temperature | -40 ~ +105 |
| Rated Voltage Range | DC Voltage | 6.3 ~ 450V |
| Capacitance Tolerance | 20%(M) (at 20, 120Hz) | |
| Leakage Current | I 0.01CV or 3A (whichever is greater) (After 2 min. of rated voltage) | (at 20) |
| I 0.02CV + 10(A) (After 2 min. of rated voltage) | (at 20) | |
| Dissipation Factor (tan) | Rated Voltage (V) | 6.3 |
| Rated Voltage (V) | 10 | |
| Rated Voltage (V) | 16 | |
| Rated Voltage (V) | 25 | |
| Rated Voltage (V) | 35 | |
| Rated Voltage (V) | 50 | |
| Rated Voltage (V) | 63 | |
| Rated Voltage (V) | 100 | |
| Rated Voltage (V) | 160 | |
| Rated Voltage (V) | 200 | |
| Rated Voltage (V) | 250 | |
| Rated Voltage (V) | 350 | |
| Rated Voltage (V) | 400 | |
| Rated Voltage (V) | 450 | |
| Dissipation Factor (tan) Note | For nominal capacitance exceeding 1000 F, add 0.02 for each 1000 F increase. (at 20, 120Hz) | |
| Low Temperature Characteristics | Impedance Ratio Z(-25)/Z(+20) (Max.) | See table in source |
| Impedance Ratio Z(-40)/Z(+20) (Max.) | See table in source | |
| Endurance (at 105) | Load Life | 6.3~100V: 2000h (5~8), 3000h (10); 160~450V: 3000h (6.3), 5000h (8) |
| Specifications after test | Capacitance change 20% of initial value; D.F.(tan) 200% of initial specified value; Leakage current Initial specified value | |
| Shelf Life (at 105, no voltage) | Duration | 1000 hours |
| Specifications after test | Capacitance change 20% of initial value; D.F.(tan) 200% of initial specified value; Leakage current 200% of initial specified value |
DIMENSIONS (Unit: mm)
| D | F | d | (L | (L20) | L |
|---|---|---|---|---|---|
| 5 | 2.0 | 0.5 | 1.5 | 2.0 | 0.5 |
| 6.3 | 2.5 | 0.5 | 1.5 | 2.0 | 0.5 |
| 8 | 3.5 | 0.5/0.6 | 1.5 | 2.0 | 0.5 |
| 10 | 5.0 | 0.6 | 1.5 | 2.0 | 0.5 |
| 13 | 5.0 | 0.6 | 1.5 | 2.0 | 0.5 |
| 16 | 7.5 | 0.8 | 1.5 | 2.0 | 0.5 |
| 18 | 7.5 | 0.8 | 1.5 | 2.0 | 0.5 |
Rated Ripple Current Coefficient
| Capacitance (F) | Frequency Coefficient | |||
|---|---|---|---|---|
| 120 Hz | 1 KHz | 10 KHz | 100 KHz | |
| 4.7F (6.3~450V) | 0.42 | 0.70 | 0.90 | 1.00 |
| 5.6 ~ 33F | 0.50 | 0.73 | 0.92 | 1.00 |
| 34 ~ 330F | 0.55 | 0.77 | 0.94 | 1.00 |
| 331 ~ 1,000F | 0.60 | 0.80 | 0.96 | 1.00 |
| 1,000F | 0.70 | 0.85 | 0.98 | 1.00 |
Note on Endurance: The endurance of aluminum electrolytic capacitors is reduced by internal heating caused by ripple current. Lifetime is halved for every 5 rise in temperature. To ensure long life, reduce the RMS ripple current during use.
Standard Ratings
A comprehensive table listing standard WV(Vdc), Capacitance (F), Case Size (DL mm), Impedance () Max. at 20/100kHz, and Rated ripple current (mArms) at 105/100KHz is available in the source document.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.