aluminum electrolytic capacitor CapXon KL101M450K315A suitable for industrial electronic applications
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The CapXon KL Series Aluminum Electrolytic Capacitors are designed for reliable performance in a wide range of applications. These capacitors offer stable electrical characteristics, robust construction, and adhere to strict quality standards, including JIS-C-5101-1. They are suitable for various industrial and electronic applications where dependable capacitance and voltage ratings are crucial.
Product Attributes
- Brand: CapXon
- Series: KL Type
- Origin: Guangdong Province, Shenzhen City, China (Manufactured by Capxon Electronic (Shen Zhen) Co., Ltd)
- Certifications/Standards: Complies with JIS-C-5101-1, JIS-C-5101-4 (non-SMD liquid capacitor), JIS-C-5101-18 (liquid SMD capacitor). Adheres to environmental regulations and RoHS standards.
- Environmental Policy: Does not use ozone-depleting chemicals (ODC) under the Montreal Protocol.
Technical Specifications
| Part Number | Capacitance (F) | Capacitance Tolerance (%) | Rated Working Voltage (VDC) | Surge Voltage (VDC) | Max. Dissipation Factor (%) | Max. Ripple Current (100kHz /105) (mA) | Max. Leakage Current (A) | Operating Temperature (C) | Case Size (D* L mm) | Endurance /105 (Hrs) | Dimensions (D x L) | Lead Diameter (d mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KL101M450K315A | 100 | -20~20 | 450 | 495 | 17 | 1890 | 1900 | -25~105 | 18X31.5 | 5000 | 18 x 31.5 | 0.8 |
Dimensions Diagram
Unit: mm
D: 18 mm
L: 31.5 mm
F: 7.5 mm
d: 0.8 mm
Part Number Explanation
KL: Series
101: Capacitance (100F)
M: Capacitance Tolerance (-20~20%)
450: Voltage (450V)
K: Case Diameter (18mm)
315: Case Length (31.5mm)
A: Lead Treatment/Special (PET Sleeve)
Technical Performance
| No. | Item | Conditions and Criterion |
|---|---|---|
| 1 | Range of working temperature | -25~105 (C) |
| 2 | Capacitance | Tolerance: -20~20% (Measured at 202C, 120Hz, 0.5Vrms) |
| 3 | Dissipation factor (tan) | See Table 1 (Measured at 202C, 120Hz, 0.5Vrms) |
| 4 | Leakage Current | I 1900 (A) (Measured after 1 min electrification with rated voltage and 100010% resistor) |
| 5 | Terminal strength | Tensile strength: 5N (d0.5mm), 10N (0.5d0.8mm), 20N (0.8d1.25mm). Bending strength: 2.5N (d0.5mm), 5N (0.5d0.8mm), 10N (0.8d1.25mm). No looseness, breakage, or bad connection. |
| 6 | Temperature characteristic | Impedance ratio must not exceed Table 2. LC 800% of initial specified value. |
| 7 | High temperature load | Capacitance Change Rate: C/C 20% of initial value. Dissipation Factor: DF 200% of specified value. Leakage Current: LC specified value. Appearance: No visible damage. (Tested after 5000H at 105C with rated DC working voltage) |
| 8 | High Temperature Exposure (Storage) | Capacitance Change Rate: C/C 20% of initial value. Dissipation Factor: DF 200% of specified value. Leakage Current: LC specified value. Appearance: No visible damage. (Tested after 1000H at 105C, no voltage applied) |
| 9 | Surge Test | Capacitance Change Rate: C/C 15% of initial value. Dissipation Factor: DF Original Spec value. Leakage Current: LC original Spec value. Appearance: No visible damage. (Tested after 1000 cycles of 30s charge/330s discharge at 495V) |
| 10 | Vibration | Capacitance Change Rate: C/C 5% of initial value. Dissipation Factor: DF Original Spec value. Leakage Current: LC original Spec value. Appearance: No visible damage. (Tested for 6 hours in X, Y, Z directions at 10~55Hz, 0.75mm amplitude, 98 m/s) |
| 11 | Solderability | Above 95% area of surroundings surface shall be covered by new soldering. (Tested after immersion in Sn-Ag-Cu solder at 2455C for 2.00.5s) |
| 12 | Resistance to soldering heat | Capacitance Change Rate: C/C 5% of initial value. Dissipation Factor: DF Original Spec value. Leakage Current: LC original Spec value. (Tested after immersion in Sn-Ag-Cu solder at 2603C for 101s) |
| 13 | Vent | No explosion, flash, flame, spark or fire. (For products with safety vent requirement) |
| 14 | Temperature Cycling | Capacitance Change Rate: C/C 5% of initial value. Dissipation Factor: DF Original Spec value. Leakage Current: LC original Spec value. Appearance: No visible damage. (10 cycles as per JIS-C-5101-1 No:4.16) |
| 15 | Steady State Damp Heat | Capacitance Change Rate: C/C 10% of initial value. Dissipation Factor: DF 1.2 times of the original Spec. value. Leakage Current: LC original Spec value. Appearance: No visible damage. (Tested after 500H at 402C, 90~95%RH) |
Characteristic Tables
Table 1: Dissipation Factor (DF) max. (%)
| Working Voltage (VDC) | 160 | 200 | 250 | 350 | 400 | 450 | 500 |
|---|---|---|---|---|---|---|---|
| D.F. (%)max. | 12 | 12 | 12 | 15 | 15 | 17 | 20 |
For capacitance >1000F, add 2% per another 1000F.
Table 2: Impedance ratio max.
| Working Voltage (VDC) | 160 | 200 | 250 | 350 | 400 | 450 | 500 |
|---|---|---|---|---|---|---|---|
| Z-25Z+20 | 3 | 3 | 3 | 5 | 5 | 6 | 6 |
| Z-40Z+20 | 4 | 5 | 6 | 6 | 6 | - | - |
Table 3: Multiplier for Ripple Current vs. Frequency
| Frequency (Hz) | 120 | 1K | 10K | 50K |
|---|---|---|---|---|
| Multiplier | 1 | 1.5 | 1.7 | 1.9 |
Marking
Example:
- (1) CapXon: Brand
- (2) 450V: Rated Voltage
- (3) 100F: Nominal Capacitance
- (4) (-) : Polarity (Cathode Indicate)
- (5) 105: Maximum Operating Temp.
- (6) KL: Series
- (7) P1502: Date Code (P:PET, 15:Year 2015, 02:Week 2)
- (8) VENT: Safety Vent
Front: KL 105 P1502 VENT
Back: CapXon 100uF 450V
Important Notes
- Specifications and descriptions are subject to change without notice.
- Operation conditions may affect capacitor lifetime; consult Capxon for lifetime calculations.
- For aerospace, , life-saving, or life-sustaining applications, consult Capxon before design-in.
- Buyers are responsible for verifying product suitability for their intended applications.
- Capxon provides express warranties only and disclaims all other warranties.
- Further information is available on www.capxongroup.com.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina