Aluminum electrolytic capacitor CapXon FH102M016G160A designed for long endurance and 105C operation
Product Overview
The CapXon FH Series is a high ripple current, 105C rated aluminum electrolytic capacitor designed for THT (Through-Hole Technology) applications. These capacitors offer low impedance, a wide capacitance range up to 18000F, and extended endurance ranging from 4,000 to 10,000 hours at 105C. They are suitable for various low-voltage applications requiring reliable performance under demanding conditions.
Product Attributes
- Brand: CapXon
- Series: FH Series
- Type: Aluminum Electrolytic Capacitor
- Mounting Type: THT (Through-Hole Technology)
- Temperature Rating: 105C
Technical Specifications
| Item | Performance Characteristics |
|---|---|
| Operating Temperature Range | -40 ~ +105C |
| Rated Voltage Range (VR) | 6.3 ~ 100V DC |
| Surge Voltage (VS) | VS = 1.15VR |
| Capacitance Range (CR) | 6.8 ~ 18000F |
| Capacitance Tolerance (C) | 20% (120Hz 20C) |
| Leakage Current (ILEAK) | 0.01CRVR or 3A, whichever is greater (After 2 minutes) |
| Dissipation Factor (tan) at 120Hz, 20C | See table in source document for values by VR. For CR > 1000F, add 2% per every multiple 1000F of rated capacitance value. |
| Low Temperature Characteristics at 120Hz (Z ratio max.) | See table in source document for values by VR. Adjustments for capacitance > 1000F apply. |
| Endurance Test (105C, VR & IR applied) | 4,000 hours to 10,000 hours depending on diameter and rated voltage. |
| Shelf Life Test (105C, VR = 0) | 1,000 hours. See source document for criteria. |
Dimensions
| D (mm) | F (mm) | d (mm) | L (mm) | a (mm) |
|---|---|---|---|---|
| 5 | 2 | 0.5 | < 20: 0.6, 20: 0.8 | 1.5 (for D < 16) |
| 6.3 | 2.5 | 0.5 | < 20: 0.6, 20: 0.8 | 1.5 (for D < 16) |
| 8 | 3.5 | 0.6 | < 20: 0.6, 20: 0.8 | 1.5 (for D < 16) |
| 10 | 5 | 0.6 | < 20: 0.6, 20: 0.8 | 1.5 (for D < 16) |
| 13 | 5 | 0.6 | < 20: 0.6, 20: 0.8 | 1.5 (for D < 16) |
| 16 | 7.5 | 0.8 | L = 25 to 31.5: 2, L < 25 and L 35.5: 1.5 | 2 (for D = 16) |
| 18 | 7.5 | 0.8 | L = 25 to 31.5: 2, L < 25 and L 35.5: 1.5 | 1.5 (for D = 18) |
Standard Ratings
(Partial list, refer to source document for complete table)
| VR (V) | CR (F) | D (mm) | L (mm) | Z Max. Impedance +20C 100kHz (m) | IR Max. Ripple Current +105C 100kHz (mA rms) | CapXon Part Number |
|---|---|---|---|---|---|---|
| 6.3 | 150 | 5 | 11 | 550 | 220 | FH151M6R3C110A |
| 6.3 | 18000 | 18 | 40 | 12 | 4290 | FH183M6R3K400A |
| 10 | 100 | 5 | 11 | 580 | 220 | FH101M010C110A |
| 100 | 1000 | 18 | 40 | 38 | 2580 | FH102M100K400A |
| 63 | 15 | 5 | 11 | 1800 | 65 | FH150M063C110A |
| 63 | 820 | 18 | 25 | 52 | 1800 | FH821M063K250A |
| 100 | 6.8 | 5 | 11 | 1800 | 65 | FH6R8M100C110A |
| 100 | 1000 | 18 | 40 | 38 | 2580 | FH102M100K400A |
Ripple Current Multiplier (Kf) vs. Frequency
| CR (F) / Frequency (Hz) | 50/60 | 100/120 | 400 | 1k | 10k | 100k |
|---|---|---|---|---|---|---|
| CR 10 | 0.47 | 0.59 | 0.76 | 0.85 | 0.97 | 1 |
| 10 < CR 100 | 0.52 | 0.62 | 0.8 | 0.89 | 0.97 | 1 |
| 100 < CR 1000 | 0.58 | 0.72 | 0.84 | 0.9 | 0.98 | 1 |
| 1000 CR | 0.63 | 0.78 | 0.87 | 0.91 | 0.98 | 1 |
Precautions & Disclaimer
Unless otherwise agreed, all products are subject to CapXon's "General Precautions and Guidelines" and "Packaging Information". Product data is subject to change without notice. Customers must observe all technical/application information and handling instructions. CapXon does not warrant suitability for specific applications; customers must perform validation and reliability evaluations. Particular operating conditions and storage may affect performance and lifetime. Consult CapXon for lifetime estimations, failure mode considerations, or worst-case scenarios. For aerospace, , life-saving, life-sustaining, safety-critical applications, or any application where failure may cause severe personal injury or death, consult CapXon before design-in. CapXon provides written expressed warranties only.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.