Aluminum Electrolytic Capacitor CapXon DV470M050E077ETR 47uF 50V Suitable for General Purpose
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The CAPXON DV Series Aluminum Electrolytic Capacitors are designed for general-purpose applications. These capacitors offer reliable performance across a wide operating temperature range of -55C to +105C. They are suitable for various electronic applications where stable capacitance and low leakage current are required. The DV series adheres to RoHS environmental standards.
Product Attributes
- Brand: CAPXON
- Series: DV Series
- Type: Aluminum Electrolytic Capacitors
- Origin: DONG GUAN CAPXON TRADING CO.,LTD / CAPXON ELECTRONIC (SHEN ZHEN) CO., LTD
- Environmental Compliance: RoHS
Technical Specifications
| CAPXON P/N | Capacitance (F) | Capacitance Tolerance (%) | Rated W.V (VDC) | Surge Volt (VDC) | Max. D.F. (%) | Ripple Current (mA) @ 100KHz, 105 | Max. I.M. () @ 100KHz | Max. L.C. (A) | Oper. Temp. () | Case Size D* L (mm) | Customer P/N |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DV470M050E077ETR | 47 | 20 | 50 | 58 | 17 | 230 | 0.7 | 23.5 | -55~+105 | 6.3X7.7 | DV470M050E077ETR |
Dimensions (Unit: mm)
| D | L | A | B | C | W | P 0.2 |
|---|---|---|---|---|---|---|
| 6.3 | 7.7 | 6.6 | 6.6 | 7.2 | 0.5~0.8 | 2.2 |
Part Number System
Capacitance (F) Code:
| Capacitance (F) | Code |
|---|---|
| 0.1 | 0R1 |
| 0.47 | R47 |
| 1 | 010 |
| 4.7 | 4R7 |
| 10 | 100 |
| 100 | 101 |
| 1000 | 102 |
| 10000 | 103 |
Capacitance Tolerance Code:
| Tolerance (%) | Code |
|---|---|
| 5 | H |
| 10 | K |
| 20 | M |
| 30 | N |
| -10 to +30 | Q |
| -10 to +50 | T |
| -10 to +20 | V |
| -10 to +100 | W |
| 0 to +20 | Z |
| -30 to +0 | U |
| 15 | S |
| 0 to +30 | Y |
| 0 to +40 | X |
| 0 to +50 | A |
| -5 to +20 | J |
| -8 to +5 | E |
| +5 to +20 | I |
| 0 to -20 | B |
| -15 to +20 | P |
| -25 to +20 | L |
| -50 to +0 | O |
| -5 to +30 | C |
Voltage (W.V) Code:
| Voltage (W.V) | Code |
|---|---|
| 6.3 | 6R3 |
| 10 | 010 |
| 16 | 016 |
| 25 | 025 |
| 35 | 035 |
| 50 | 050 |
| 63 | 063 |
| 80 | 080 |
| 100 | 100 |
| 160 | 160 |
| 200 | 200 |
| 220 | 220 |
| 250 | 250 |
| 350 | 350 |
| 400 | 400 |
| 420 | 420 |
| 450 | 450 |
| 500 | 500 |
Case Diameter (D: mm) Code:
| Diameter | Code |
|---|---|
| 3 | A |
| 4 | B |
| 5 | C |
| 6.3 | E |
| 7.3 | 7 |
| 8 | F |
| 10 | G |
| 12 | H |
| 13 | I |
| 16 | J |
| 18 | K |
| 20 | L |
| 22 | M |
| 25 | N |
| 30 | O |
| 35 | P |
| 40 | Q |
| 42 | U |
| 45 | V |
| 51 | R |
| 63.5 | S |
| 76.2 | T |
| 89 | X |
| 14.5 | Y |
| 12.5 | Z |
Height (L: mm) Code:
| Description | Code |
|---|---|
| 5 | 050 |
| 5.5 | 055 |
| 7 | 070 |
| 7.7 | 077 |
| 8 | 080 |
| 11 | 110 |
| 11.5 | 115 |
| 12 | 120 |
| 12.5 | 125 |
| 14 | 140 |
| 16 | 160 |
| 20 | 200 |
| 21 | 210 |
| 25 | 250 |
| 25.5 | 255 |
| 31.5 | 315 |
| 35 | 350 |
| 35.5 | 355 |
| 41 | 410 |
| 47 | 470 |
| 52 | 520 |
| 83 | 830 |
| 98 | 980 |
| 118 | A18 |
| 141 | A41 |
| 151 | A51 |
Product Type Code:
| Description | Code |
|---|---|
| Taping (Ammo Package) | TA, TB, TC, TD, TE, TF, etc. |
| Taping (Reel Package) | RA, RB, RC, RD, RE, etc. |
| Lead Cutting | CA |
| Lead Forming | CF |
| Cutting Lead Forming | FA |
| Lead Crimping & Forming | KF |
| Lead Cutting & Kink | CK |
| Kink Bending & Cutting | KA |
| Forming & Kink | CR, CL |
| Without Lead Treatment | E |
| With Lead Treatment | A |
Lead Treatment Code:
| Description | Code |
|---|---|
| Taping (Ammo Package) | TATB TCTD TETF ETC. |
| Taping (Reel Package) | RARB RCRD RE Etc. |
| Lead Cutting | CA |
| Lead Forming | CF |
| Cutting Lead Forming | FA |
| Lead Crimping & Forming | KF |
| Lead Cutting & Kink | CK |
| Kink Bending & Cutting | KA |
| Forming & Kink | CRCL |
| Without Lead Treatment | E |
| With Lead Treatment | A |
Remarks
- Leakage Current Test: I0.01CV or 3 (uA), after 2 minutes, whichever is greater, measured with rated working voltage applied.
- Operating Temperature: -55C to +105C
- Capacitance and Dissipation Factor Test: At +20C, 120Hz
- Load Life Test: At +105C for 2000 Hrs.
- Shelf Life Test: At +105C for 1000 Hrs.
- Capacitors are suitable for the specified electric model; contact manufacturer for other applications.
Performance Data
| Test Item | Conditions | Criteria |
|---|---|---|
| Leakage Current (L.C.) | Rated voltage applied in series with 100010 resistor. Measured after capacitors reached rated voltage. | I0.01CV or 3(), after 2 minutes, whichever is greater. |
| Capacitance (Cap.) | Measuring frequency: 120Hz20%. Measuring voltage: 0.5Vrms max. +1.5 to 2.0VDC. Measuring circuit: Series equivalent circuit. | Shall be within the specified capacitance tolerance. |
| Dissipation Factor (tan) | Measuring frequency: 120Hz20%. Measuring voltage: 0.5Vrms max. +1.5 to 2.0VDC. Measuring circuit: Series equivalent circuit. | See table in source document for values based on voltage. |
| Terminal Strength (Pull) | Capacitor body held, force applied to lead wire. | Lead wire shall neither loosen nor break away. |
| Terminal Strength (Bending) | Capacitor body inclined through 90 and returned. Consecutive bends in opposite direction. | Lead wire shall neither loosen nor break away. |
| Soldering Heat Resistance Test | Reflow in specified conditions. | Capacitance change: Within 10%. Tan : Not more than specified. Leakage current: Not more than specified. Swelling of case: Less than 0.2mm (for |
| Solderability Test | Solder: Sn-3Ag-0.5Cu. Flux: Ethanol solution (25 wt.% rosin). Solder temperature: 2455. Dipping time: 20.5 seconds. | At least 95% of circumferential surface of the dipped portion of terminal shall be covered with new solder. |
| Temperature Cycles | Refer to JIS-C-5101-1 (2010) No:1-10. | Capacitance change: Within 5%. Tan : Not more than specified. Leakage current: Not more than specified. Appearance: No leakage and damaged. |
| Vibration | Frequency range: 2 to 3000Hz. Amplitude or Acceleration: 0.75 mm or 98m/s (whichever is less severe). | Capacitance change: Within 5%. Tan : Not more than specified. Leakage current: Not more than specified. Appearance: No leakage and damaged. |
| Damp Heat Steady State Test | Test temperature: +402. Relative humidity: 90 to 95%RH. Test time: 250 hours (Endurance time 2000H) or 500 hours (Endurance time2000H). | Capacitance change: Within 20% (2000H) or 10% (>2000H). Tan : Not more than 120% of specified. Leakage current: Not more than specified. Appearance: No leakage and damaged. |
| Endurance | Rated D.C voltage applied. Ambient temperature: 1052. Specified test time: 2000 hours. | Capacitance change: Within 30%. Tan : Not more than 300% of specified. Leakage current: Not more than specified. Appearance: No leakage and damaged. |
| Surge Voltage Test | Series protective resistor: 100010. Test cycle: 1000 cycles. Surge voltage: 1.15x rated voltage (315V) or 1.1x rated voltage (>315V). | Capacitance change: Within 15%. Tan : Not more than specified. Leakage current: Not more than specified. Appearance: No leakage and damaged. |
| Pressure Relief Vent | Apply reverse voltage with 1 amp DC current. | No sparking; No shorting. No breaking out of electrolyte paper; Vent opening, no flowing down of electrolyte. |
| High Temperature Storage | 1000 hours at 1052 without applied voltage. | Capacitance change: Within 30%. Tan : Not more than 300% of specified. Leakage current: Not more than specified. Appearance: No leakage and damaged. |
| High and Low Temperature Characteristics | Temperature cycles from -55C to +105C. | Impedance ratio and capacitance change within specified limits. |
Marking
- Rated voltage
- Nominal capacitance (uF)
- Polarity (-) indication (Cathode)
- Production date code (e.g., D08: D=DV Series, 0=Year 2010, 8=Month)
Packing
- Capacitors on tape are reeled with cathode side adjacent to sprocket hole.
- Cover tape width and coverage of sprocket holes specified.
- Cover tape peel back force: 20 to 100 grams.
Temperature Profile (Reflow)
- Pre-heating: Less than +160 lasting 120 seconds.
- Capacitor top temperature shall not exceed +260.
- Duration over +230 at capacitor top shall not exceed 30 seconds.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina