Electrical Noise Control Capacitor CHAMPION MPP333K0400D100904B0815 Metallized Polypropylene Film Type

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document is an Approval Sheet for Metallized Polypropylene Film Capacitors (MPP-QP) manufactured by DONGGUQN CHAMPION ELECTRONIC TECHNOLOGY CO., LTD. These capacitors are designed for interference suppression applications.

Product Attributes

Brand: CHAMPION
Origin: Dongguan, China
Material: Metallized Polypropylene Film
Model Series: MPP-QP (MPP-TYPE Metallized Polypropylene Film Interference Suppression Capacitor)
Customer: (Lichuang Mall)

Technical Specifications

Item	Specification
Scope	Capacitors for type MPP (Metallized Polypropylene Film Capacitor)
Operation Temperature	-40 ~ +105
Capacitance Range	0.001uF ~ 15 uF
Capacitance Tolerance	±2%(G), ±3%(I), ±5%(J), ±10%(K), ±20%(M)
Rated Voltage	50VDC, 63VDC, 100VDC, 250VDC, 400VDC, 450VDC, 630VDC, 1KVDC
Champion Part No. Structure	□□□ □□□ □ □□□□ □ □□□□□□ □ □□ (tape) (capacitance) (tolerance) (rated voltage) (Dc/Ac) (Size) (lead forming) (lead pitch) (lead length)
Tape Codes	PEI, MEF, MEM, MPP, PEN, PPN, PPS, MEC, MET
Capacitance Codes	101 (0.0001uF), 102 (0.001uF), 103 (0.01uF), 104 (0.1uF), 105 (1uF), 106 (10uF)
Tolerance Codes	F (±1%), G (±2%), H (±2.5%), I (±3%), J (±5%), K (±10%), M (±20%)
Rated Voltage Example	0630 -> 630V, 1000 -> 1KV
DC/AC Designation	D → DC; A → AC
Size Example	090805 → (W)9(H)8(T)5
Lead Forming Codes	B, K, R, U, W, T, S (TAPING, Customer Special Require)
Lead Pitch Codes	08 (7.5mm), 10 (10mm), 15 (15mm), 20 (20mm), 28 (27.5mm)
Lead Length Codes	04 (4mm), 08 (8mm), 10 (10mm), 13 (13mm), 23 (23mm), 30 (30mm), 40 (40mm)
Specifications Standard	JIS 5115, IEC384-16
Withstand Voltage (Terminals)	150% Of Rated Voltage, 60sec. (No abnormality)
Withstand Voltage (Terminal/Enclosure)	UR×200%+1000VDC, 60sec. (No abnormality)
Insulation Resistance (CR ≤ 0.33uF)	≥ 9,000MΩ (Measured at 100±15VDC, For 60sec / 25℃)
Insulation Resistance (CR > 0.33uF)	≥ 3,000 (MΩ. uF) (Measured at 100±15VDC, For 60sec / 25℃)
Capacitance Measurement	Within the tolerance specified (1KHz, 1Vrms Max. at 25℃)
Dissipation Factor	≤ 0.001 (0.1%) Max. (1KHz, 1Vrms Max. at 25℃)
Tense Strength of Terminal	No wire breakage and No Damage of Capacitor (Load Force: 1.0 Kg, Holding Time: 10 ± 1sec)
Bending Strength of Terminal	No wire breakage and No Damage of Capacitor (Load Force: 0.5 Kg, Bending Time: 4 x 90° in 5sec)
Vibration	Appearance: No Visible Damage; Contact: Normal (Frequency: 10~55~10Hz, Distance: 1.5mm, Course: X, Y, Z, Time: 2h/axis)
Solder-ability	75% Of The Surface Tinning (Solder Temp: 270±5℃, Solder Time: 3±0.5sec)
Heat Shock Test	Appearance: No Visible Damage; Withstand Voltage: Normal; Capacitance Change: ≤ ±3% (Solder Temp: 270±5℃, Solder Time: 3±0.5sec, Test Voltage: 150% Rated Voltage for 1min)
Cold Resistance	Appearance: No Visible Damage; Capacitance Change: 0~ -10% (Test Temp: -40℃, Test Times: 2Hrs)
Dry Heat Resistance	Appearance: No Visible Damage; Withstand Voltage: Normal; Capacitance Change: +5~ -2%; Insulation Resistance: ≥ 2,700MΩ (CR≤0.33uF), ≥ 900 MΩ (CR>0.33uF) (Test Temp: 105±2℃, Test Times: 2Hrs)
Humidity Resistance	Appearance: No Visible Damage; Withstand Voltage: Normal; Capacitance Change: ≤ ±10%; Insulation Resistance: ≥ 2,700MΩ (CR≤0.33uF), ≥ 900 MΩ (CR>0.33uF); DF: ≤ 0.001 (Test Temp: -40±2℃, RH: 90~95%, Test Times: 240±8 HRS, Test Voltage: 130% Rated Voltage for 1 min)
Heat Resistance (Charge & Discharge)	Appearance: No Visible Damage; DF: ≤ 0.001; Capacitance Change: ±10%; Insulation Resistance: Over 3000MΩ (Test Voltage: Rated Voltage Charge/Discharge 2s, 100,000±1000 cycles, Test Temp: 105±2℃)
Heat Resistance (Continuous)	Appearance: No Visible Damage; DF: ≤ 0.001; Capacitance Change: ±7%; Insulation Resistance: Over 3000MΩ (Test Voltage: 125% Rated Voltage, Test Temp: 105±2℃, Test Times: 500±24Hrs)