Long lifespan capacitor CHAMPION SMEC102J100M1 with plastic case and excellent self healing properties
Product Overview
The CL71 series is a metallized polyester film capacitor designed for various electronic applications. It features a non-inductive structure, a wide capacitance range, small size, and light weight. With excellent self-healing properties and a long lifespan, these capacitors are ideal for DC blocking, bypassing, coupling, filtering, and low-pulse circuits.
Product Attributes
- Brand: (Guangdong Quanpeng Electronics Technology Co., Ltd.)
- Origin: China
- Material: Metallized Polyester Film
- Housing: Plastic case (UL94 V-0) with epoxy resin filling
- Certifications: UL94 V-0 (for housing)
Technical Specifications
| Model Series | Reference Standard | Climate Category | Rated Temperature | Operating Temperature Range | Rated Voltage (Vdc) | Capacitance Range (F) | Capacitance Tolerance | Dielectric Strength (5s) | Dissipation Factor (tan) @ 1kHz | Dissipation Factor (tan) @ 10kHz | Insulation Resistance (IR) / Time Constant (RC) | Max Voltage Rise Rate (dV/dt) |
| CL71 | GB/T 7332 (IEC 60384-2) | 55/125/56 | 85 | -55125 | 63, 100, 250, 400, 630, 1000 | 0.0012.2 | 5%(J), 10%(K), 20%(M) | 1.5UR | 0.0100 | 0.0150 | CR0.33F, IR15000M; 0.33F| See table below | |
Maximum Voltage Rise Rate (dV/dt)
| UR (V) | dv/dt (V/S) |
| 63/100 | 75 |
| 250 | 100 |
| 400 | 150 |
| 630 | 200 |
| 1000 | 350 |
Product Code Structure
SMEC [Capacity Code] [Capacity Error Level] [Rated Voltage] [Housing Code]
Capacity Codes: e.g., 104 = 100nF = 0.1F
Capacity Error Levels: J=5%, K=10%, M=20%
Rated Voltage Codes: 063=63V, 100=100V, 250=250V, 400=400V, 630=630V, 1000=1000V (Note: 160V and other intermediate values may exist based on the full datasheet)
Housing Codes: M1=7.2*6.5*2.5, M1-1=7.2*6.5*3, M2=7.2*7.5*3.5, M3=7.2*9.5*4.5, M4=7.2*10*5, M5=7.2*11*6
Dimensions and Specifications (Selected Examples)
| Rated Voltage (Vdc) | Capacitance (F) | W (mm) | H (mm) | T (mm) | P (mm) | d (mm) | Product Code |
| 63 | 0.1 | 7.2 | 6.5 | 2.5 | 5 | 0.5 | SMEC104J063M1 |
| 63 | 0.1 | 7.2 | 7.5 | 3.5 | 5 | 0.5 | SMEC104J063M2 |
| 100 | 0.1 | 7.2 | 6.5 | 2.5 | 5 | 0.5 | SMEC104J100M1 |
| 100 | 0.1 | 7.2 | 7.5 | 3.5 | 5 | 0.5 | SMEC104J100M2 |
| 250 | 0.1 | 7.2 | 9.5 | 4.5 | 5 | 0.5 | SMEC104J250M3 |
| 400 | 0.1 | 7.2 | 11 | 6 | 5 | 0.6 | SMEC104J400M5 |
| 630 | 0.01 | 7.2 | 9.5 | 4.5 | 5 | 0.6 | SMEC103J630M3 |
| 630 | 0.01 | 7.2 | 11 | 6 | 5 | 0.6 | SMEC103J630M5 |
| 1000 | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
Reliability and Test Conditions
| Test Item | Test Condition | Performance Criteria |
| Vibration | 10Hz500Hz, 0.75mm amplitude, 98m/s max acceleration, 2h/direction, 6h total | No visible damage; C/C5%; DF increment 0.005 (C1F) / 0.003 (C>1F); IR 50% of initial |
| Shock | 4000 cycles, 390 m/s, 6ms pulse duration | No visible damage |
| Dry Heat | +1253, 16h | No permanent breakdown, arcing, or visible damage; C/C5%; DF increment 0.005 (C1F) / 0.003 (C>1F); IR 50% of initial |
| Damp Heat (Cycles) | IEC 60068-2-30 Db, severity b, 24h/cycle | (Specific performance criteria after cycles not fully detailed in snippet) |
| Cold | -553, 2h | (Specific performance criteria not fully detailed in snippet) |
| Low Pressure | 15-35, 8.5kPa, 1h | (Specific performance criteria not fully detailed in snippet) |
| Steady State Damp Heat | +402, 93(+2/-3)%RH, 56 days | No visible damage, clear marking; C/C5%; DF increment 0.005 (C1F) / 0.003 (C>1F); IR 50% of initial; No permanent breakdown or arcing |
| Endurance | +85/1252, 1.25UR, 1000h | No visible damage, clear marking; C/C5%; DF increment 0.005 (C1F) / 0.003 (C>1F); IR 50% of initial; No permanent breakdown or arcing |
| Charge/Discharge | 10000 cycles, 1.0UR5%, 0.5s charge/0.5s discharge | C/C3%; DF increment 0.005 (C1F) / 0.003 (C>1F); IR 50% of initial |
Taping Specifications
| Technical Parameter | Symbol | Dimension (mm) | Tolerance (mm) | Taping Type |
| Pitch | P | 5.0 | 0.5 | B0=Straight Tape, BK=K Type Tape |
| Component Pitch | P3 | 12.7 | 1.0 | N/A |
| Feed Hole Pitch | Po | 12.7 | 0.3 | N/A |
| Lead Position | P1 | 3.85 | 0.7 | N/A |
| Body Position | P2 | 6.35 | 1.3 | N/A |
| Lead Spacing | F | 5.0 | +0.6/-0.2 | N/A |
| Body Tilt Angle | S | 0 | 1.0 | N/A |
| Bottom of Body to Hole Center | H | 18.5 | 0.5 | N/A |
| Carrier Tape Width | W | 18 | 0.5 | N/A |
| Adhesive Tape Width | W0 | 10 max | N/A | N/A |
| Feed Hole Position | W1 | 9 | 0.5 | N/A |
| Adhesive Tape Position | W2 | 3 max | N/A | N/A |
| Feed Hole Diameter | D0 | 4 | 0.2 | N/A |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.