Metallized Polypropylene Film Capacitor CHAMPION MPP105K0630D312011B2815 with Wide Capacitance Range

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document specifies the Metallized Polypropylene Film Capacitor (MPP-QP) series from Dongguan Champion Electronic Technology Co., Ltd. These capacitors are designed for interference suppression applications.

Product Attributes

Brand: CHAMPION
Origin: Dongguan, China
Product Name: METALLIZED POLYPROPYLENE FILM CAPACITOR (MPP-QP)
Series: CBB Boxed Series
Customer: LICHENG MALL

Technical Specifications

Item	Specification	Details
Scope	MPP (Metallized Polypropylene Film Capacitor)	Capacitor for type MPP
Operation Temperature	-40 ~ +105
Capacitance Range	0.001uF ~ 15 uF
Capacitance Tolerance	2%(G), 3%(I), 5%(J), 10%(K), 20%(M)
Rated Voltage	50VDC, 63VDC, 100VDC, 250VDC, 400VDC, 450VDC, 630VDC, 1KVDC
Champion Part No. Structure		1. Tape, 2. Capacitance, 3. Tolerance, 4. Rated Voltage, 5. Dc/Ac, 6. Size, 7. Lead Forming, 8. Lead Pitch, 9. Lead Length
Tape Codes	PEI, MEF, MEM, MPP, PEN, PPN, PPS, MEC, MET
Capacitance Codes	101, 102, 103, 104, 105, 106	0.0001uF, 0.001uF, 0.01uF, 0.1uF, 1uF, 10uF
Tolerance Codes	F, G, H, I, J, K, M	1%, 2%, 2.5%, 3%, 5%, 10%, 20%
Rated Voltage Notation	e.g., 0630 -> 630V, 1000 -> 1KV	Indicating real working voltage
DC/AC Notation	D DC; A AC
Size Notation	e.g., 090805 (W)9(H)8(T)5	(Width * Height * Thickness)
Lead Forming Codes	B, K, R, U, W, T, S	TAPING, Customer Special Require
Lead Pitch Codes	08, 10, 15, 20, 28	7.5mm, 10mm, 15mm, 20mm, 27.5mm
Lead Length Codes	04, 08, 10, 13, 23, 30, 40	4mm, 8mm, 10mm, 13mm, 23mm, 30mm, 40mm
Specifications Standard	JIS 5115, IEC384-16
Withstand Voltage (Terminals)	150% of Rated Voltage, 60sec.	No abnormality
Withstand Voltage (Terminal/Enclosure)	UR200+1000VDC, 60sec.	No abnormality
Insulation Resistance (Terminals)	CR 0.33uF: IR 9,000M CR > 0.33uF: IR 3,000 (M. uF)	Measured at 10015VDC, For 60sec / 25
Capacitance Measurement	Within the tolerance specified	1KHz, 1Vrms Max. at 25
Dissipation Factor	0.001 (0.1%) Max.	1KHz, 1Vrms Max. at 25
Tense Strength of Terminal	1.0 Kg Load Force, 10 1sec Holding Time	No wire breakage and No Damage of Capacitor
Bending Strength of Terminal	0.5 Kg Load Force, 4 x 90 in 5sec Bending Time	No wire breakage and No Damage of Capacitor
Vibration Test	Frequency: 10~55~10Hz (1min/cycle) Distance: 1.5mm Course: X, Y, Z axis Time: 2h/axis (6h total)	(1) Appearance: No Visible Damage (2) Contact: Normal
Solder-ability	75% Of The Surface Tinning	Solder temp: 2705, Solder time: 30.5sec
Heat Shock Test	Solder temp: 2705, Solder time: 30.5sec Test Voltage: 150% of Rated Voltage for 1min.	(1) Appearance: No Visible Damage (2) Withstand Voltage: Normal (3) Capacitance Change: 3% of Initial Value
Cold Resistance Test	Test Temperature: -40, Test Times: 2Hrs	(1) Appearance: No Visible Damage (2) Capacitance Change: 0~ -10% of Initial Value
Dry Heat Resistance Test	Test Temperature: 105 2, Test Times: 2Hrs	(1) Appearance: No Visible Damage (2) Withstand Voltage: Normal (3) Capacitance Change: +5~ -2% of Initial Value (4) Insulation Resistance: CR 0.33uF: IR 2,700M; CR > 0.33uF: IR 900 M
Humidity Resistance Test	Test Temperature: -40 2, RH: 90 ~ 95%, Test Times: 2408 HRS Test Voltage: 130% of Rated Voltage for 1 min.	(1) Appearance: No Visible Damage (2) Withstand Voltage: Normal (3) Capacitance Change: 10% of Initial Value (4) Insulation Resistance: CR 0.33uF: IR 2,700M; CR > 0.33uF: IR 900 M (5) DF (tan): 0.001
Heat Resistance (Charge & Discharge)	Test Voltage: Rated Voltage (2s Charge, 2s Discharge) Cycles: 100,0001000 Test Temperature: 1052	(1) Appearance: No Visible Damage (2) DF (tan): 0.001 (3) Capacitance Change: 10% of Initial Value (4) Insulation Resistance: Over 3000M
Heat Resistance (Continuous)	Test Voltage: 125% of Rated Voltage Test Temperature: 1052, Test Times: 50024Hrs	(1) Appearance: No Visible Damage (2) DF (tan): 0.001 (3) Capacitance Change: 7% of Initial Value (4) Insulation Resistance: Over 3000M
Dimensions	Refer to drawing	W (Max), T (Max), H (Max), A (Min) = 1.5mm (max), P0.5, d 0.05mm
Convention Marking	CAPACITANCE CODE (e.g., 104), TOLERANCE CODE (e.g., K), Rated Voltage (e.g., 275V DC)