AEC Q200 Certified Automotive Inductor Chilisin AWPC00453226102M00 Halogen Free RoHS Compliant Part
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The AWPC00453226 Series is a range of AEC-Q200 qualified inductors designed for automotive applications. These components are halogen-free, RoHS compliant, and REACH compliant, ensuring adherence to environmental and safety standards. They are engineered to operate reliably within a wide temperature range, making them suitable for demanding automotive environments.
Product Attributes
- Brand: Chilisin
- Series: AWPC00453226
- Certifications: AEC-Q200, Automotive Grade, Halogen Free, RoHS Compliant, REACH Compliant
- Construction: Ferrite core and cover sheet, copper wire, Ag/Cu/Ni/Sn terminals.
Technical Specifications
| Part Number | Test Freq. (MHz) | RDC (m) Max | IDC (A) Max | Insulation Resistance (M) Min. | Rated Voltage (Vdc) Max. | Tolerance (%) |
|---|---|---|---|---|---|---|
| AWPC0045322660000 | 60 | 100 | 3.0 | 10 | 50 | 20/25 |
| AWPC0045322690000 | 90 | 100 | 3.9 | 10 | 50 | 20/25 |
| AWPC0045322623100 | 230 | 100 | 4.7 | 10 | 50 | 20/25 |
| AWPC0045322633100 | 330 | 100 | 5.8 | 10 | 50 | 20/25 |
| AWPC0045322642100 | 420 | 100 | 6.0 | 10 | 50 | 20/25 |
| AWPC0045322650100 | 500 | 100 | 10.1 | 10 | 50 | 20/25 |
| AWPC00453226601M00 | 600 | 100 | 8.2 | 10 | 50 | 20/25 |
| AWPC0045322670100 | 700 | 100 | 8.5 | 10 | 50 | 20/25 |
| AWPC0045322680100 | 800 | 100 | 8.9 | 10 | 50 | 20/25 |
| AWPC0045322690100 | 900 | 100 | 11.0 | 10 | 50 | 20/25 |
| AWPC0045322610200 | 1000 | 100 | 11.3 | 10 | 50 | 20/25 |
| AWPC0045322614200 | 1400 | 100 | 14.8 | 10 | 50 | 20/25 |
| AWPC0045322620200 | 2000 | 100 | 15.0 | 10 | 50 | 20/25 |
Note: Tolerance M:20%, Y :25%
Operating Temperature Range: -55 ~ 125 (Including self-temperature rise)
Storage Temperature: -40 ~ 125 (For after assembly)
Z Test Frequency: 100MHz, 0.1V
RDC: Single wire test value
Irms: For a 15 temperature rise from 25 ambient.
Reliability
Mechanical Performance
- Board Flex: Substrate Dimension: 100x40x1.6mm, Deflection: 2.0mm, Keeping Time: 60 sec. Forces applied must not damage terminal electrode and ferrite.
- Terminal Strength: Force of 2 Lbs for 60 seconds. Must not damage terminal electrode and ferrite.
- Solderability: Electrodes shall be at least 95% covered with new solder coating. Pre-heating: 150, 1min. Solder Composition: Sn/3.0Ag/0.5Cu. Solder Temperature: 2455. Immersion Time: 41sec.
- Resistance to Soldering Heat: Inductance change shall be within 20%. Pre-heating: 150, 1min. Solder Composition: Sn/Ag3.0/Cu0.5. Solder Temperature: 2605. Immersion Time: 101sec.
- Resistance to Solvents: No change in appearance or obliteration of marking. Inductors must withstand 6 minutes of alcohol or water.
- Mechanical Shock: Pulse shape: Half-sine waveform, Impact acceleration: 100 g, Pulse duration: 6 ms, Number of shocks: 18 shocks (3 shocks for each face), Orientation: Bottom, top, left, right, front and rear faces. Forces applied must not damage terminal electrode and ferrite.
- Vibration: Vibration waveform: Sine waveform, Vibration frequency: 10Hz~2000Hz, Vibration acceleration: 5g, Sweep rate: 0.764386 octave/minute, Duration of test: 12 cycles each of 3 orientations (20 minutes for each cycle), Vibration axes: X, Y & Z. Appearance: No damage. Inductance change shall be within 20%.
Environmental Performance
- High Temperature Exposure (Storage): Temperature: 1253, Time: 1000hrs. Appearance: No damage. Inductance change shall be within 20% (Measured after exposure in room condition for 24hrs).
- Low Temperature Exposure (Storage): Temperature: -553, Time: 1000hrs. Inductance change shall be within 20% (Measured after exposure in room condition for 24hrs).
- Biased Humidity: Temperature: 852, Relative Humidity: 85%, Time: 1000hrs. Inductance change shall be within 20% (Measured after exposure in room condition for 24hrs).
- Temperature Cycling: Total cycles: 1000 cycles. Temperature Cycling Test Conditions: -55 to +125 . Soak Mode Condition: 30 minutes. Inductance change shall be within 20% (Measured after exposure in room condition for 24hrs).
- Operational Life: Temperature: 1252, Applied Current: Rated Current, Time: 1000 24 hrs. Inductance change shall be within 20% (Measured after exposure in room condition for 24hrs).
- ESD Test: Contact Discharge: 6KV, 12KV, 16KV, 25KV. Air Discharge: 6KV, 12KV, 16KV, 25KV. Discharge interval: 1 second (Contact),
Packaging
Packaging Quantity
| Type | PCS/Reel |
|---|---|
| 453226 | 2500 |
Reel Dimensions (mm)
| Type | A | B | C | D |
|---|---|---|---|---|
| 453226 | 330 | 100 | 13 | 13.4 |
Tape Dimensions (mm)
| Type | B0 | K0 | F | E | W | P | P0 | P2 | |
|---|---|---|---|---|---|---|---|---|---|
| 453226 | 4.9 | 3.0 | 1.75 | 5.50 | 12 | 8 | 4 | 2 | 11 |
Recommended Land Pattern (mm)
| Type | G | H | I |
|---|---|---|---|
| 453226 | 3.4 | 3 | 5.9 |
Note on Land Pattern:
- A0: 3.6
- D: 1.5
- F: 0.6
General Notes:
- Ensure product evaluation and confirmation against specifications when mounted.
- Avoid knocking or dropping the product.
- Use the product only for the purpose, under the condition, and in the environment agreed upon.
- Storage period is less than 12 months. Follow storage conditions (Temperature: 5 to 40C, Humidity: 10 to 75% RH or less). Terminal electrode soldering may deteriorate if the storage period elapses.
- Do not use or store in locations with conditions such as gas corrosion (salt, acid, alkali, etc.).
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina