Halogen Free Molded Wire Wound Power Inductor Cjiang FXL0630-150-M ROHS for DC DC Converters and PCs
Product Overview
The FXL series of wire-wound molded SMD power inductors from SZ CJIANG TECHNOLOGY CO., LTD are designed for general electronics equipment. These inductors feature Halogen-Free and ROHS compliance, high rated current capabilities, and operation up to a maximum total temperature of 125. Their molded construction contributes to low core loss and ultra-low buzz noise. Ideal applications include laptops, PCs, servers, base stations, DC/DC converters, battery-powered devices, and SSD modules.
Product Attributes
- Brand: CJIANG
- Series: FXL
- Compliance: Halogen Free, ROHS
- Construction: Molded
- Origin: Shenzhen, China
Technical Specifications
| Series | Dimensions (L x W x H, mm) | Inductance Value (H) | Tolerance | DCR (m) Max. | Isat (A) Max. | Irms (A) Typ. | Max Operating Temperature (C) |
|---|---|---|---|---|---|---|---|
| FXL0412 | 4.4 x 4.2 x 1.0 | 0.15 - 4.7 | 20% | 195 | 1.80 | 1.8 | 125 |
| FXL0420 | 4.4 x 4.2 x 1.8 | 0.1 - 22 | 20% | 363 | 1.12 | 0.9 | 125 |
| FXL0518 | 5.4 x 5.2 x 1.6 | 0.47 - 10 | 20% | 155 | 2.0 | 2.2 | 125 |
| FXL0530 | 5.4 x 5.2 x 2.8 | 0.10 - 22 | 20% | 248 | 2.0 | 1.6 | 125 |
| FXL0615 | 7.0 x 6.6 x 1.3 | 0.47 - 10 | 20% | 175 | 2.65 | 1.77 | 125 |
| FXL0618 | 7.0 x 6.6 x 1.6 | 0.1 - 22 | 20% | 350 | 1.84 | 1.4 | 125 |
| FXL0624 | 7.0 x 6.6 x 2.2 | 0.22 - 22 | 20% | 230 | 2.0 | 1.6 | 125 |
| FXL0630 | 7.0 x 6.6 x 2.8 | 0.10 - 47 | 20% | 385 | 1.8 | 1.3 | 125 |
| FXL0640 | 7.0 x 6.6 x 3.8 | 0.15 - 47 | 20% | 320 | 2.0 | 1.6 | 125 |
| FXL0650 | 7.0 x 6.6 x 4.8 | 0.47 - 47 | 20% | 230 | 2.08 | 1.5 | 125 |
| FXL0840 | 8.8 x 8.2 x 3.8 | 0.22 - 47 | 20% | 225 | 2.9 | 2.5 | 125 |
| FXL1030 | 10.0 x 10.0 x 2.8 | 0.22 - 33 | 20% | 160 | 3.53 | 2.3 | 125 |
| FXL1040 | 10.0 x 10.0 x 3.8 | 0.15 - 100 | 20% | 340 | 2.1 | 1.8 | 125 |
| FXL1050 | 10.0 x 10.0 x 4.8 | 0.22 - 100 | 20% | 290 | 2.5 | 1.8 | 125 |
| FXL1340 | 12.8 x 13.45 x 4.0 | 0.22 - 22 | 20% | 51 | 4.8 | 3.8 | 125 |
| FXL1350 | 12.6 x 13.45 x 4.8 | 0.22 - 47 | 20% | 130 | 4.0 | 2.6 | 125 |
| FXL1360 | 12.6 x 13.45 x 5.8 | 1.0 - 150 | 20% | 350 | 2.16 | 1.2 | 125 |
| FXL1365 | 12.6 x 13.45 x 6.5 | 2.2 - 100 | 20% | 170 | 3.2 | 3 | 125 |
| FXL1770 | 17.15 x 17.15 x 7.0 | 2.2 - 100 | 20% | 130 | 4.4 | 3.2 | 125 |
| FXL2213 | 22.0 x 23.5 x 12.6 | 1.0 - 100 | 20% | 40 | 7.5 | 9.5 | 125 |
Note:
- All test data is referenced to 25 C ambient.
- Operating temperature range: -55 C to +125 C.
- Isat (A) MAX: DC current at which the inductance drops approximately 30% from its value without current.
- Irms (typ): DC current that causes the temperature rise (T = 40C) from 25C ambient.
- Irms (Max): DC current that causes the temperature rise (T = 20C) from 25C ambient.
- The part temperature (ambient + temp rise) should not exceed 125C under worst-case operating conditions.
- Absolute maximum voltage for FXL series inductors: DC 30V.
Product Identification
FXL 0412 -1R5 - M
- FXL: Series name
- 0412: Dimension
- 1R5: Inductance Value (1R5 = 1.5H)
- M: Inductance Tolerance (M = 20%)
Materials
- CORE: Alloy Sponge Powder
- WIRE: Polyurethane copper wire
- Terminal: Copper plated with Sn
Marking
The inductor is marked with a 3-digit code using black ink.
Recommended Soldering Technologies
- Re-flowing Profile: Preheat: 150 ~200/60~120sec. Allowed time above 217: 60~90sec. Max temp: 260. Max time at max temp: 10 sec.
- Iron Soldering Profile: Soldering Iron Power: Max. 30W. Pre-heating: 150/60sec. Soldering Tip temperature: 350 Max. Soldering time: 3sec. Max.
Packaging Information
Available in Tape Packaging. Standard quantities per reel, inner box, and carton box are detailed in the specification document.
Disclaimer
All products listed in this specification are developed, designed, and intended for use in general electronics equipment. They are not designed or warranted for applications requiring especially high reliability, or where failure might directly cause damage to society, person, or property. Please contact CJIANG for details if intending to use products in critical applications such as aircraft, aerospace, medical, or equipment.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.