Durable electronic potentiometer CTR R09720NS-FB15A7.0-B103-0044 with total resistance range and switch options

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document details the specifications for the 33529/6+((7 potentiometer, designed for various electronic applications. It offers a total resistance range, specific resistance tapers, and includes optional switch functionalities. The product adheres to RoHS directives and is manufactured by DONG GUAN CHANG TAI ER ELECTRONIC., LTD.

Product Attributes

Brand: DONG GUAN CHANG TAI ER ELECTRONIC., LTD.
Origin: CHINA
Certifications: RoHS, TS16949
Customer P/N: 33529/6+((7
Customer Name: Not specified
Customer Product: PASS
Supplier: DONG GUAN CHANG TAI ER ELECTRONIC., LTD.

Technical Specifications

Section	Parameter	Specification	Notes
1. General Information	Applicable models	R095, R096, R097, R098, R09J, R09P, R09B
	Usage environment temperature	-10C to 70C
	Storage environment temperature	0C to 85C
	Test condition	Temperature: 5~35C, Moisture: 45~85%HR
1. General Information	Soldering heat-resistance	1. Soldering iron Max, 350C5C at 3 sec 2. Auto soldering 260C5C max. at 3 Sec. Preheating temperature of board surface: 100C max. at within 1 minutes. 3. To guarantee the above process at 1 or 2 times.
	Country of origin	China
	Environmental requisition	RoHS compliant
2. Construction	Appearance	Every part should be finished, not exist rust flaw, crack and bad plating
2. Construction	Measurements	Under conditions prescribed by design drawing.
3. Mechanical characteristics	Total rotational angle	30010
	Rotational torque	10~200gf.cm	Rotational velocity : 60/sec
	Detent torque	80~250gf.cm
	Rotational stopper strength	1 Kgf.cm, 4Kgf.cm, 5Kgf.cm
3. Mechanical characteristics	Pull-Push Strength of Shaft	8Kgf, 10Kgf
3. Mechanical characteristics	Nut tightening strength	10Kgf.cm
3. Mechanical characteristics	Shaft wobble	On the tip of the single shaft exert 250gf, Shaft radial deviant be smaller than: 0.7*shaft long L size/20mm
4. Electrical characteristics	Total resistance	10%
	Resistance taper	A, B, C
	End resistance (Terminal :1-2, 2-3)	R10K: 10, 10K>R250K: 20, R
	Ratings power	B Taper: 0.05W, Other taper: 0.025W
4. Electrical characteristics	Maximum operating voltage	B Taper: 20V DC or 50V AC, Other taper: 12V DC or 25V AC
4. Electrical characteristics	Slider noise	100mV
4. Electrical characteristics	Gang error	4dB (-40dB~0dB)	*Apply the Dual-Unit only
4. Electrical characteristics	Insulation resistance	100M at 250V DC
4. Electrical characteristics	Voltage proof	300V AC for 1 Minute
4. Electrical characteristics	Rotational life	10,000 cycles, 15,000 cycles, 30,000 cycles	On the without load status according to the 600 r./h rotation, permissible resistance change 15%
5. Switch characteristics	Apply	Yes / No
	Switch type	Rotate type, Push-Push type
	Switch circuit	S.P.S.T
	Switch ratings power	Rotate switch: 12V DC 1A, Push-Push switch: 12V DC 0.5A
5. Switch characteristics	Switch contact resistance	Initial stage: 100 m, after 10,000 cycles: 1 max.
	Switch working angle or track	Rotate switch: 5010, Push-Push switch track: 0.5mm or 1.5mm	specific reference to the drawing
	Switch working torque	Rotate switch: 800gf.cm, Push-Push switch: 7020gf
6. Waterproof characteristics	Waterproof standard	Grade -7 of Waterproof standard	Potentiometers Shaft and Bush in 1M deep of water, other component sealed after be exposed to the standard atmosphere, after 30 minutes no water into the Potentiometer inner.