Durable CTR C0510N-H2.0-B104-00S electronic part designed for performance under specified test conditions

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The C0510N SERIES GENERAL SPECIFICATION applies to the C0510N model, primarily used for consumer products. It outlines the operational and storage temperature ranges, standard test conditions, and detailed technical specifications for its mechanical and electrical characteristics, as well as endurance and packing details.

Product Attributes

Brand: DONG GUAN CHANG TAI ER ELECTRONICS CO.,LTD
Model: C0510N Series

Technical Specifications

Item	Conditions	Specifications
Scope	C0510N
Operating temperature range		-10~70
Storage temperature range		-30~70
Test conditions: Standard atmospheric conditions	ambient temperature 5~35, relative humidity 45~85%; air pressure 86kpa to 106kpa
Test conditions: Measurement limit	ambient temperature 202, relative humidity 60~70%, air pressure 86kpa to 106kpa
ENDURANCE CHARACTERISTICS: Resistance to soldering heat	Peak: 2605,5sec max.	Change in total resistance is relative to the value before test: 5%, without case deformation of case or terminals loosing. Electrical characteristics shall be satisfied with specification.
ENDURANCE CHARACTERISTICS: Resistance to heat	After 2408 hours of storage in the constant temperature tank at 702C, it should be kept at room temperature for 1 hour.	Change in total resistance is relative to the value before test: 20%;
ENDURANCE CHARACTERISTICS: Resistance to cold	After 964 hours of storage in the constant temperature tank at -253, it should be kept at room temperature for 1.5hour.	Change in total resistance is relative to the value before test: 20%;
ENDURANCE CHARACTERISTICS: Damp heat	Temperature 402C, and humidity is 90-95%. After placed in the constant temperature and humidity tank for 944 hours, it should be kept at room temperature for 1 hour.	Change in total resistance is relative to the value before test: 20%;
CONSTRUCTION: Appearance		EVRY PART SHOULD BE FINISHED NOT TO EXIST RUSTFLAW CRACK AND PLATING
Mechanical characteristics: Total Sliding Travel		5.0mm0.5mm
Mechanical characteristics: Operating force		10 to40 gf
Mechanical characteristics: Lever stopper strength		2.5Kgf Min
Mechanical characteristics: Push-Pull Strength		1Kgf max.at 5Sec 10Sec
Mechanical characteristics: Number of Detents(Click)		1C 7C 11C 21 41
Electrical characteristics: Total resistance		100K20%
Electrical characteristics: End resistance Term 1~2		Less than 1 k
Electrical characteristics: End resistance Term 2~3		Less than 1 k
Electrical characteristics: Resistance taper		A B C D W
Electrical characteristics: Ratings power Taper B		0.01W
Electrical characteristics: Ratings power Other taper		0.025W
Electrical characteristics: Maximum operating voltage Taper B		AC50V
Electrical characteristics: Maximum operating voltage Other taper		AC25V
Electrical characteristics: Slider noise		Less then 100mV
Electrical characteristics: Insulation resistance	at DC 100V	More then 50M
Electrical characteristics: Voltage proof	1 minute at 100V AC
PACKING: Packing Portion		Packed with braided tape, 1000PCS per tray, 4 trays per carton. A total of 7000 PCS