High precision CTR R16156G0-KA15D6.5-B203-000 potentiometer with 30 click detents and 0.1 watt rating
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This document outlines the specifications for the R161G Dual Unit Series potentiometers, manufactured by DONG GUAN IDEAL ELECTRONICS & TECHNOLOGY CO.,LTD. These components are designed for various electronic applications requiring precise rotational control and resistance adjustment.
Product Attributes
- Brand: DONG GUAN IDEAL ELECTRONICS & TECHNOLOGY CO.,LTD.
- Origin: DONG GUAN
- Applicable Models: R161G Dual Unit Series
Technical Specifications
| SPECIFICATION | R161G Dual Unit Series |
| Mechanical Characteristics | |
| Total rotational angle | 3005 |
| Rotational torque | 20-100gf.cm (Note: 60/turn) |
| Rotational stopper strength | 6kgf.cm |
| Push-pull strength | 7Kgf.max. |
| Shaft wobble | 0.7L/30mm p-p max |
| Bushing mount Strength | 5kgf.cm (Shaft support bushing) |
| Numder of click | 30 (250gf.cm) |
| Click sliout force | N/A |
| Electrical Characteristics | |
| Total resistance | 20 K 20% |
| Total resistance tolerance | R1-2: 20 , R2-3: 20 |
| Resistance taper | B taper (Standard) |
| Ratings power | 0.1W (B taper) / 0.05W (other taper) |
| Maximum operating voltage | 150V AC (B taper) / 20V DC (other taper) |
| Slider noise | 100M min.at 500V DC |
| Gang error | 3dB Max.(-40~0dB) |
| Insulation resistance | 100M min.at 500V DC |
| Voltage proof | 500V AC for 1 minute |
| Rotational life | 10,000 cycles |
| Work temperature | -10C ~ +70C |
| Storage temperature | -25C ~ +75C |
| Storage conditions | Keep in a dry and clean place, avoid direct sunlight and high temperature. Avoid contact with corrosive gases. Store in a well-ventilated environment. |
| Residual resistance | 20 |
| Construction | |
| Appearance | Every Part Should Be Finished Not To Exist Rust Flaw Crack And Plating Fail |
| Soldering Specifications | |
| Lead-free solder specifications | Soldering conditions potentiometer placed in the following 1.6mm thickness of single layer printed circuit board |
| Manual soldering | To be performed within 3 seconds at 350C or below. |
| Automated/Semi-automated soldering | Soldering process machine set the temperature below 260C, 4 seconds or less. Warm-up time of no more than two minutes, solder junction maximum preheat temperature does not exceed 100C. |
| Flux ratio | Foam-type and flux ratio above 0.82, foam height to half the thickness of the printed circuit board as a standard. Flux cannot flow onto the potentiometer substrate surface and the surface of the printed circuit board. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina