Current Sensing Resistor CTS 73M5R050F Metal Plate Construction Copper Alloy with Matte Tin Terminal

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

CTS 73M Series Current Sensing Resistors

The CTS 73M1A, 73M2A, 73M3x, and 73M5 Series Current Sensing Resistors are metal plate packaged devices designed for excellent accuracy in current detection. These resistors offer good electrical and thermal characteristics due to their special metallic resistor material. They are ideal for applications such as current detection, current limiting, regulated battery circuits, motor control, power supplies, hard disk drives, inverters/converters, industrial equipment, and infotainment systems.

Product Attributes

Brand: CTS
Material: Metal Plate Construction Copper Alloy
Terminal Finish: Matte Tin [e3]
Certifications: Reflow Capable per JEDEC J-STD-020, +260C Maximum
Packaging: Tape and Reel

Technical Specifications

Model Type	Power Rating [Watts]	Resistance Range [m]	Resistor Tolerance [%]	Rated Ambient Temperature	Operating Temperature Range	Terminal Finish
73M1A	1.0	0.25 - 50	1	+70C	-55C to +155C	Matte Tin [e3]
73M2A	2.0	1 - 75	1	+70C	-55C to +155C	Matte Tin [e3]
73M3A	3.0	0.25 - 3	1	+70C	-55C to +155C	Matte Tin [e3]
73M3B	3.0	4 - 100	1	+70C	-55C to +155C	Matte Tin [e3]
73M5	5.0	1 - 120	1	+70C	-55C to +155C	Matte Tin [e3]

Environmental Specifications

Test	Test Description	Maximum Delta R [%]
Temperature Coefficient	73M1A, 73M2A, 73M5 (R	-
Temperature Coefficient	73M3A (R 0.001: 200ppm/C; R > 0.001: 100ppm/C)	-
Temperature Coefficient	73M3B (50ppm/C)	-
Short-Time Overload	Applied electric power equal to 3 times rated power in 5s [JIS C 5201-1 4.13]	0.5 [73M1A, 73M2A, 73M3x], 2.0 [73M5]
Insulation Resistance	Over 10⁹ ohm Measured at terminals and center of resistor by D.C. 100V 15V in 1 minute [JIS C 5201-1 4.6]	-
Dielectric Withstanding Voltage	No Breakdown Applied at terminals and center of resistor on A.C. 500V, 1 minute [JIS C 5201-1 4.7]	-
Resistance to Solder Heat	No Damage Place on copper sheet [t = 0.2mm] heated by solder, +260C 5C, 5 0.5 seconds	0.5
Solderability	Over 95% Coverage Immerse terminal in solder [Sn3Ag0.5Cu], +245C 0.5C, 3 0.5 seconds [JIS C 5201-1 4.17]	-
Vibration	No Damage Frequency 10Hz to 55Hz, Pk-Pk amplitude 15mm, sweeping rate 1 minute, 3 directions each 2 hours [JIS C 5201-1 4.22]	0.5
Resistance to Solvent	No Damage Immerse in Isopropyl alcohol, +20C to +25C, 60 5 seconds	-
High Temperature Exposure	1,000 hours @ +155C 2C, bias load 0% power [JIS C 5201-1 4.23.2]	2.0
Change of Temperature	30 minutes @ -55C, 3 minutes @ +25C, 30 minutes @ +155C, 3 minutes @ +25C; 5 cycles	0.5
Moisture Resistance	MIL-STD-202, Method 106, 0% power 7a and 7b not required, 1 cycle = 24 hours, 10 cycles	1.0
Bias Humidity	1,000 hours @ +85C 2C, 85% relative humidity, bias load 10%, on time 90 minutes/off time 30 minutes	1.0
Endurance [Rated Load]	1,000 hours @ +70C 3C, bias load, on time 90 minutes/off time 30 minutes	2.0

Mechanical Specifications

Model Type	Dimensions [mm] (L x W x t)	Resistance [m]
73M1A	3.2 0.3 x 1.6 0.3 x 0.6 0.3	0.25 - 50
73M2A	6.3 0.3 x 3.2 0.3 x 1.3 Max.	1 - 75
73M3A	6.5 0.3 x 6.8 0.3 x 1.2 Max.	0.25 - 3
73M3B	7.2 0.3 x 6.7 0.3 x 1.3 Max.	4 - 100
73M5	11.4 0.3 x 6.9 0.3 x 1.8 Max.	1 - 120