AC Ceramic Capacitor Safety Standard Model DGCX DGCXY1065Y5V1G102M for Electronic Device Reliability

• Outer Diameter (D): 6.5mm 1.0
• Thickness (T): 4.5mm 0.5
• Length (L): 20.0mm Min
• Pitch (F): 10.0mm 0.5
• Lead Diameter (d): 0.55mm 0.05
• Lead to Case (c): 2.5mm Max
• Material: Y5V

• Model: Y1-400VAC-Y5V-102M
• Brand: DGCX
• Series Name: CD (Y1) / CE (Y2)
• Nominal Capacitance: 102 (1000PF)
• Capacitance Tolerance: M (20%)
• Safety Certification Marks: ENEC, VDE, CQC, UL/CUL
• Rated Voltage: Y1: X1 440V; Y1 400V(AC); Y2: X1 400V; Y2 300V(AC)
• Safety Performance Level: X1Y1; X1Y2
• Climatic Category: 25/125/21/B
• Operating Temperature: -25 to +125

Example: Y1 060 Y5V 1 G 102 M

• <1> Voltage Level: Y1(Q), Y2(G) (Withstand Voltage: 4000V, 1500V AC respectively)
• <2> Product Outer Diameter: 060 (6.00mm), 070 (7.00mm), etc.
• <3> Temperature Characteristics: Y5P(B) (10%), Y5U(E) (+22%,-56%), Y5V(F) (+22%,-82%)
• <4> Lead Type: 1 (Straight), 2 (Short Straight), etc.
• <5> Lead Pitch: B (5.0mm), E (7.5mm), G (10.0mm), F (12.5mm)
• <6> Nominal Capacitance: 4R7 (4.7PF), 1R0 (1PF), 102 (1000PF), etc.
• <7> Capacitance Tolerance: J (5%), K (10%), M (20%), Z (-20%, +80%)

• Standard Conditions: Temperature 21-27, Relative Humidity 45-75%, Air Pressure 86-106Kpa.
• Reference Conditions: Temperature 252, Relative Humidity 60-70%, Air Pressure 86-106Kpa.

• Appearance & Dimensions: No obvious defects, within standard range.
• Marking: Clear and easily identifiable.
• Capacitance & Dissipation Factor (D.F.): Measured at 25, 1KHz 0.1KHz, 1.0V. D.F. 2.5% for Y5P, Y5U, Y5V.
• Insulation Resistance (I.R.): >6000M (Tested at 100V for 605 sec).
• Dielectric Strength (Between Terminals): No breakdown or flashover at specified test voltage for 60 sec. X1Y2: AC1500V (r.m.s.); X1Y1: AC4000V (r.m.s.).
• Dielectric Strength (Body Insulation): No breakdown or flashover. X1Y2: AC2500V (r.m.s.); X1Y1: AC4000V (r.m.s.).
• Temperature Characteristics: Capacitance change rate within specified limits for B(Y5P), E(Y5U), F(Y5V) across -25 to +85.
• Soldering: 3/4 of lead area uniformly tinned.
• Resistance to Soldering Heat: No visible damage, capacitance change within 10%, I.R. 3000M.
• Vibration Resistance: No visible damage, capacitance within tolerance, D.F. 2.5%.
• Damp Heat (Steady State): No visible damage, capacitance change 15%, I.R. >3000M.
• Damp Heat (Loaded): No visible damage, capacitance change 15%, I.R. >3000M.
• Endurance Test (Life Test): No visible damage, capacitance change within 20%, I.R. >3000M.
• Flame Test: Capacitor extinguishes automatically after flame removal.
• Terminal Strength (Tensile & Bending): No breakage or damage.
• Active Flammability: Gauze does not ignite.
• Temperature Rapid Change: No visible damage, capacitance change within specified limits, D.F. 5.0% (Y5P, Y5U) / 7.5% (Y5V), I.R. >3000M.