Non Inductive Winding X2 Capacitor DGCX MX2684KQ3D30YB2000R for Power Supply Interference Protection
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This X2 metallized polypropylene film capacitor is designed for EMI suppression in power supplies. It features a non-inductive winding structure with self-healing properties, capable of withstanding high voltage surges. Encased in a flame-retardant plastic shell and epoxy resin, it is suitable for interference suppression and X-capacitor circuits where capacitor failure does not pose a shock hazard. It is not recommended for capacitive power supply or high-temperature/high-humidity applications.
Product Attributes
- Brand: DGCX
- Product Series: MPX
- Construction: Non-inductive winding
- Encapsulation: Flame-retardant plastic shell and epoxy resin (UL94V-0)
- Lead Material: Tinned copper-clad steel wire
- Internal Material: Metallized polypropylene film
- Color: Yellow (as per example code)
- Certifications: UL&CUL (E499953), ENEC-VDE (40048056), CQC (CQC18001191338)
- Environmental Compliance: RoHS, REACH, Halogen-free (if required)
Technical Specifications
| Product Code | Capacitance (F) | Tolerance (%) | Rated Voltage (VAC) | Dissipation Factor (DF) @ 1kHz | Dimensions (mm) W x H x T | Pitch (P) | Lead Diameter (d) |
|---|---|---|---|---|---|---|---|
| MX2684KQ3D30YB2000R | 0.68 | 10% | 275 | 0.1% | 18 x 13.5 x 7.5 | 15 1.0 | 0.8 0.05 |
General Electrical Characteristics
| Parameter | Specification | Standard |
|---|---|---|
| Operating Temperature Range | -40 ~ +110 | |
| Climatic Category/Flame Retardancy | 40/110/56 B | |
| Capacitance Range | 0.001F ~ 4.7F | |
| Capacitance Tolerance | 10%(K) | |
| Rated Voltage | 275/300/310Vac | |
| Dissipation Factor (DF) | 0.0010 (1kHz, 20) for 0.001FCR0.47F 0.0020 (1kHz, 20) for 0.47FCR1.0F 0.0030 (1kHz, 20) for CR1.0F | GB/T 6346.14, IEC60384-14 |
| Insulation Resistance | 15,000M for C0.33uF (100VDC, 60s) 5000M*uF for C>0.33uF (100VDC, 60s) | |
| Withstand Voltage (Inter-electrode) | 4.3UR(VDC), 60s | |
| Withstand Voltage (Case) | 2120Vac (60s) |
Product Structure and Main Materials
| No. | Main Material | Description | Remarks |
|---|---|---|---|
| 1 | Metallized Polypropylene Film | MPPZAH | -/- |
| 2 | Tin-plated Alloy Wire | Zinc-tin alloy wire | -/- |
| 3 | Lead Wire | Tinned copper-clad steel wire | -/- |
| 4 | Potting Material | Epoxy resin | Flame-retardant UL94V-0 |
| 5 | Outer Protective Material | PBT Plastic Shell | Flame-retardant UL94V-0 |
Marking Description (Example)
| Item | Description |
|---|---|
| DGCX | Company Trademark |
| MPX | Product Model |
| 0.22F | Rated Capacitance |
| K | Capacitance Tolerance |
| X2 | Certification Level X2 |
| 275V/300/310V | Rated Voltage (VAC) |
| 40/110/56 B | Climatic Category/Flame Retardancy |
| Certification Mark |
Packaging Information
| Item | Dimensions (L*W*H) |
|---|---|
| Inner Carton | 34.5*23.5*24.5 cm |
| Outer Carton | 49*36*27 cm |
Packaging Details:
- Carton marking includes: Manufacturer Part Number, number of packages and quantity per package, Lot No.
- Capacitors are packed in transparent PVC bags for moisture and dust protection.
- RoHS environmental mark.
- Other customer-specified markings.
Storage Conditions
- Prolonged exposure to air may degrade lead soldering performance.
- Avoid high temperature and high humidity environments.
- Recommended Storage: (Under original packaging)
- Temperature: Max 35
- Relative Humidity: Max 80%
- Storage Time: Maximum 12 months (based on production date marked on the packaging bag).
Environmental Characteristics
- Compliant with RoHS requirements.
- Compliant with REACH requirements.
- Compliant with Halogen-free requirements (if specified).
Product Electrical Characteristics and Test Conditions
General Test Conditions: Ambient temperature: 1535, Relative humidity: 25%75%. For any questions regarding test results, use the following limits: Ambient temperature: 202, Relative humidity: 60%70%.
| No. | Item | Characteristic | Test Method |
|---|---|---|---|
| 1 | Terminal Strength | Tensile Strength | Wire diameter: 0.6&0.8mm, Load: 10N, Time: 10s Wire diameter: 1.0&1.2mm, Load: 20N, Time: 10s |
| Bending Strength | Wire diameter: 0.6&0.8mm, Force: 5N, 902 times Wire diameter: 1.0&1.2mm, Force: 10N, 902 times | ||
| 2 | Solderability | Tinning rate of lead wire 95% | Flux temperature: 2455, Immersion time: 2.50.5s |
| 3 | Soldering Heat Resistance | Appearance: No visible damage | Soldering temperature: 2605, Immersion time: 101s. Recovery time 1~2 hours at -40, 2 hours. |
| Dissipation Factor increase 0.005 Capacitance variation C/C5% | |||
| 4 | Temperature Cycling | Appearance: No visible damage | -40 to +105, 5 cycles, 30min per step. |
| Capacitance variation C/C5% Dissipation Factor increase 0.008 (C1.0F, 10kHz) / 0.005 (C>1.0F, 1kHz) Insulation Resistance IR/IR50% | |||
| 5 | Climate Sequence (Test Db) | Appearance: No visible damage | Dry Heat +105, 16 hours (1st cycle) Cycle Damp Heat, Cold, Cycle Damp Heat (subsequent cycles) |
| Capacitance variation C/C5% Dissipation Factor increase 0.008 (C1.0F, 10kHz) / 0.005 (C>1.0F, 1kHz) Insulation Resistance IR/IR50% | |||
| 6 | Damp Heat (Steady State) | Appearance: No visible damage | 9095%RH, 402, 56 days. Recovery time 1~2 hours. |
| Capacitance variation C/C5% Dissipation Factor increase 0.008 (C1.0F, 10kHz) / 0.005 (C>1.0F, 1kHz) Insulation Resistance IR/IR50% | |||
| 7 | Pulse Voltage | Self-healing breakdown | Applied pulse voltage: 2.5KV (CR1 F), 5.2KV (CR > 1 F). |
| 8 | Endurance | Appearance: No visible damage | Temperature: +110, Test voltage: 1.25UR, Time: 1000 hours. Voltage increased to 1000V (RMS) for 0.1s every 1h. |
| Capacitance variation C/C10% Dissipation Factor increase 0.008 (C1.0F, 10kHz) / 0.005 (C>1.0F, 1kHz) Insulation Resistance IR/IR50% | |||
| 9 | Charge/Discharge | Capacitance variation C/C10% Dissipation Factor increase 0.008 (10KHz,CR1.0uF) / 0.005 (1KHz,CR>1.0uF) Insulation Resistance IR/IR50% | Number of cycles: 10,000. Charge time: 0.5s. Discharge time: 0.5s. Charging voltage: 2.5KV. Charging resistance: 220/CR . Discharge resistance: R= CR F. Dv/dt: 100V/us. |
| 10 | Flammability Test | Burning time after flame removal 10s, burning drips should not ignite cotton paper. Needle Flame Test: Flame retardancy grade B. | Ignition time based on product volume (mm). |
| 11 | Self-Ignition Test | Gauze wrapped around the capacitor should not burn. Electrical measurements not required. | Capacitor withstands discharge from a stored energy capacitor 20 times. After discharge, the capacitor is charged to 2.5KV. Interval between discharges: 5s. URAC applied across the capacitor throughout the test and maintained for 2 minutes after the last discharge. |
Usage Rules
Usage Scope:
- Do not exceed the upper limit category temperature.
- Avoid overload operation.
- Do not exceed the maximum pulse current during use.
Operation Precautions:
- Avoid repeatedly squeezing the base of the lead wires.
- Be cautious of the tips of the lead wires.
Soldering:
- Soldering heat can transfer through lead terminals and encapsulation layers to the capacitor core. Be mindful of potential degradation or damage from high temperatures and prolonged soldering times.
- Recommended Soldering Temperatures:
- Wave Soldering: TP110; Ts120, 45s. For polypropylene film capacitors (P7.5mm, T4mm), wave soldering time
- Soldering Iron: Tip temperature not exceeding 350, welding time not exceeding 3 seconds.
- Capacitors with printed lines are not suitable for reflow soldering.
Note: TP: Maximum temperature the capacitor body can withstand during the preheating stage. Ts: Maximum temperature the capacitor body can withstand during wave soldering.
Capacitor Impedance vs. Frequency Curve
Typical Curve Z=f(f)
Product Electrical Characteristic Diagrams
(Diagrams not provided in the source text)
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina